<abstract xmlns="http://www.w3.org/1999/xhtml">Coastal area of Bangladesh is one of the significant ecologically productive areas and full of rich biodiversity that includes variety of species that are endemic to this region. The Shipbreaking activity has turned out to be more significant within the economic situation of the poverty-stricken Bangladesh. The study vicinity was alienated into the Shipbreaking zone and control site for proportional investigation. The study was administered to assess the changing pattern of the concentration of trace metals in soil Soil samples of the study areas and its impact on fish diversity of the ship breaking area in Bangladesh over the 40 years. From the finding of the study, it had been found that the concentration of the heavy metals found within the ship breaking area followed a pattern within the following fashion Fe>Pb>Cr>Mn>Zn>Ni>Cu>Cd>Hg. The finding of this heavy metal analysis of sediments demonstrated that there has been in an increment of two to eight times of selected heavy metals from the finding of 1980 to 2019. The study compared with the two relatively pristine or less impacted (undisturbed) areas, that served because of the reference zone. These studies also found that about 30 species of fishes became irregular or are threatened with extinction than they were 40 years ago.</abstract>

Department of Fisheries Resource Management

Chattogram Veterinary and Animal Sciences University

Changing Pattern of Heavy Metals Accumulation in and around in Ship breaking Area Over the 40 years and Its Impact on Fish Diversity in Adjacent Areas of Bangladesh

<abstract xmlns="http://www.w3.org/1999/xhtml">In view of the global need to curb the effect of contaminants in waste water on our environment, the adsorption potentials of modified carbon from bambaranut (<italic>Vigna subterranean</italic>) shell was investigated for its efficiency in the removal of methylene blue from waste water. The adsorbent morphology and surface chemistry were established by Brunauer-Emmett-Teller (BET) determination and Scanning Electron Microscopy (SEM), as well as other standard laboratory procedures. The prepared material was used for the uptake of MB from aqueous solution in a batch process, using UV spectrophotometer Model 752 at 620nm to analyze for the residual dye concentration. The effect of operational parameters such as contact time, adsorbent dosage, initial dye concentration and pH were analyzed to determine the factors controlling the rate of adsorption. Results from the study showed that the active carbon prepared was a porous material, with surface area of 193 m2/g, average pore size of about 10.98nm, and pore volume of 0.530cm3/g. With increase in initial dye concentration from 15mg/l to 75mg/l, a decrease in percent adsorption from 95.4% to 72.19% was observed. Increase in adsorbent dosage (from 0.1g to 0.5g), contact time (from 5 min to 40 min) and pH from 2 to 10 resulted in increase in percent adsorption from 84.03% to 98.83%, 54.24% to 84% and 48.17% to 84.03% respectively. About 98.83% removal of MB dye was achieved after 20 min, at pH of 6, temperature of 27±2oC, 0.5g weight of adsorbent and initial concentration of 60mg/l of 50ml MB dye solution. Langmuir isotherm best fits the equilibrium adsorption data with R2 = 0.996; the adsorption intensity obtained from Freundlich model (n>1) and the energy of adsorption obtained from the D-R model (&lt; 8kJ/mol) suggested that physisorption dominates the adsorption of methylene blue onto the prepared activated carbon. Adsorption kinetic data was best described using Pseudo second order kinetic model (R2 = 0.996), giving equilibrium rate constant (k2) of 7690g mg-1 min-1. The characteristic results showed that bambaranut shell can be employed as an alternative to commercial adsorbents in the removal of methylene blue dye from aqueous solutions and waste water.</abstract>

Department of Industrial Chemistry, Faculty of Science

Equilibrium and Kinetic Studies of Liquid Phase Adsorption of Methylene Blue Onto Phosphoric Acid Modified Bambaranut Shell

<abstract xmlns="http://www.w3.org/1999/xhtml">Adsorbents were derived from banana peel through chemical treatment using phosphoric acid, potassium hydroxide, and sodium hydroxide to adsorb methylene blue from water. The adsorption of methylene blue was performed at varying concentrations and contact times. The equilibrium data fitted well with Langmuir equation, with a maximum monolayer adsorption capacity of 99.28 mg/g (28%). Phosphoric acid-treated adsorbent exhibits a greater capacity despite a lower affinity than the other adsorbents. A two-stage batch adsorber model was developed to optimize the adsorbent dosage for performance evaluation. Banana peel is a promising resource of adsorbent for wastewater treatment.</abstract>

Isotherm and kinetics of methylene blue removal by <italic>Musa acuminata</italic> peel adsorbents

<abstract xmlns="http://www.w3.org/1999/xhtml">As part of the current research for more effective antimalarial drug, Cu (II) complex of sulphamethazine with 1,10 phenanthroline was synthesized. The novel complex was characterized by Elemental analysis, FT-IR and electronic spectroscopy. The novel complex is insoluble in water, which is an indication of covalent and non- electrolyte character. The elemental analysis result of the complex correspond with the proposed formula [Cu(SUF)(phen)(SCN)2]. The electronic spectrum of sulfamethazine and 1, 10- phen showed absorption bands at 212 nm (47169 cm−1) and 306 nm (32679 cm–1). These bands were assigned to the n – δ* and π – δ* transitions. The infrared bands were seen at 3443 – 3344 cm −1which were attributed to the presence of <italic>v</italic>(NH2), <italic>v</italic>(NH) and <italic>v</italic> (OH) vibrations experience bathochromic shift in the metal complex. The parent ligands acted as a bidentate chelating agent showing coordination through the pyridine nitrogen and the nitrogen of the NH moiety in this case.</abstract>

Spectroscopic Study of Metal (II) Complex of Sulphamethazine with 1,10 Phenanthroline

AHEAD OF PRINT

Volume 5 (2021): Issue 1 (June 2021)

Volume 4 (2020): Issue 2 (December 2020)

Volume 4 (2020): Issue 1 (June 2020)

Volume 3 (2019): Issue 2 (December 2019)

Volume 3 (2019): Issue 1 (June 2019)

Acta Chemica Malaysia

Due to rapid advances in scientific research and industrialization, there is more need for an advanced and durable study in chemistry and the chemical engineering field. Acta Chemica Malaysia (ACMY) is an open access as well as print journal that widely covers all branches of chemistry and chemical engineering. It provides a medium for mutual communication between academia and industry all over the world. The Journal welcomes in English original research articles; research notes or short communications and topical or interpretative review articles (previously unpublished) in all established areas of chemistry, chemical engineering and related fields. This journal is a scholarly journal maintains high standards of scientific excellence and its editorial board ensures a rapid peer review process with the help of the Editorial Manager System. Manuscripts are accepted for publication only if at least two reviewers agree on the scientific quality of the submitted manuscript. Abstracts and full texts of all articles published by the Acta Chemica Malaysia Open Access Journal are freely accessible to everyone immediately after publication.   Acta Chemica Malaysia (ACMY) has established itself as the leading journal in the exciting field of chemistry and chemical engineering. Its aim is for the rapid communication of knowledge and experience amongst engineers and scientists working in the area of research development or in the practical application of chemical technology. Coverage includes but is not limited to:  Catalysis and Reaction Engineering  Agrochemicals  Reaction Engineering  Biochemical Engineering  Petroleum Technology  Corrosion  Clean Energy  Functional Material  Leather Processing  Nanotechnology and Nanoscience  Biomaterials and Biotechnology  Particle Technology  Multiphase Processing  Polymerization  Separation Science and Technology  Sustainable Technologies  Pharmaceuticals and Drugs  &amp; Metallurgy and Applied Chemistry, Green Processing etc.,   Archiving  Sciendo archives the contents of this journal in Portico - digital long-term preservation service of scholarly books, journals and collections.  Plagiarism Policy  The editorial board is participating in a growing community of Similarity Check System's users in order to ensure that the content published is original and trustworthy. Similarity Check is a medium that allows for comprehensive manuscripts screening, aimed to eliminate plagiarism and provide a high standard and quality peer-review process. 

Acta Chemica Malaysia

AHEAD OF PRINT

Changing Pattern of Heavy Metals Accumulation in and around in Ship breaking Area Over the 40 years and Its Impact on Fish Diversity in Adjacent Areas of Bangladesh

Equilibrium and Kinetic Studies of Liquid Phase Adsorption of Methylene Blue Onto Phosphoric Acid Modified Bambaranut Shell

Isotherm and kinetics of methylene blue removal by Musa acuminata peel adsorbents

Spectroscopic Study of Metal (II) Complex of Sulphamethazine with 1,10 Phenanthroline

Suche

Alle Bände und Hefte dieser Zeitschrift