Strojnícky časopis - Journal of Mechanical Engineering's Cover Image
Uneingeschränkter Zugang

Strojnícky časopis - Journal of Mechanical Engineering

Band 68 (2018): Heft 3 (November 2018)

COVER HERUNTERLADEN
Vorherige Ausgabe
Nächste Ausgabe
19 Artikel
Uneingeschränkter Zugang | 06. Dez. 2018
Investigation of Defect Effects on Adhesively Bonded Joint Strength Using Cohesive Zone Modeling
Jamal-Omidi Majid

Jamal-Omidi Majid

Malek-Ashtar University of Technology, Space Research Institute, Department of Aerospace Engineering,Tehran, Iran
Suche nach diesem Autor auf
Sciendo|Google Scholar
Majid, Jamal-Omidi
 und 
Mohammadi Suki Mohammad Reza

Mohammadi Suki Mohammad Reza

Malek-Ashtar University of Technology, Space Research Institute, Department of Aerospace Engineering,Tehran, Iran
Suche nach diesem Autor auf
Sciendo|Google Scholar
Mohammad Reza, Mohammadi Suki
  
Uneingeschränkter Zugang | 06. Dez. 2018
Effect of Tapered Interference Fit between Impeller and Shaft in Turbo Machines
Nilesh Vishwakarma

Nilesh Vishwakarma

Department of Mechanical Engineering, Veermata Jijabai Technological Institute,Mumbai, India
Suche nach diesem Autor auf
Sciendo|Google Scholar
Vishwakarma, Nilesh
, 
Avinash Renuke

Avinash Renuke

Design and NPI Engineer, GE Oil & Gas,Bangalore-560066, India
Suche nach diesem Autor auf
Sciendo|Google Scholar
Renuke, Avinash
 und 
V.M. Phalle

V.M. Phalle

Faculty of Mechanical Engineering, Veermata Jijabai Technological Institute,Mumbai-400019, India
Suche nach diesem Autor auf
Sciendo|Google Scholar
Phalle, V.M.
  
Uneingeschränkter Zugang | 06. Dez. 2018
A Closed-Form Buckling Formula for Open-Coiled and Properly Supported Circular-Bar Helical Springs
Yildirim Vebil

Yildirim Vebil

Cukurova University, Department of Mechanical Engineering, 01330,Adana, Turkey
Suche nach diesem Autor auf
Sciendo|Google Scholar
Vebil, Yildirim
  
Uneingeschränkter Zugang | 06. Dez. 2018
Effect of Additives on Static Settled Concentration, pH and Viscosity of Bottom Ash-Water Suspension
Kaushal Kumar

Kaushal Kumar

Department of Mechanical Engineering, K.R. Mangalam University Gurugram-122103,Haryana, India
Suche nach diesem Autor auf
Sciendo|Google Scholar
Kumar, Kaushal
, 
Satish Kumar

Satish Kumar

Department of Mechanical Engineering, National Institute of Technology, Jamshedpur -831014,Jharkhand, India
Suche nach diesem Autor auf
Sciendo|Google Scholar
Kumar, Satish
 und 
Ajay Kumar

Ajay Kumar

Department of Mechanical Engineering, K.R. Mangalam University Gurugram-122103,Haryana, India
Suche nach diesem Autor auf
Sciendo|Google Scholar
Kumar, Ajay
  
Uneingeschränkter Zugang | 06. Dez. 2018
Dynamic Modelling and Analyzing of a Walking of Humanoid Robot
Bajrami Xhevahir

Bajrami Xhevahir

University of Prishtina “Hasan Prishtina”, Faculty of Mechanical Engineering, Department of Mechatronics, Pristina, Bregu i Diellit, p.n.10000Prishtinë, Kosovës
Suche nach diesem Autor auf
Sciendo|Google Scholar
Xhevahir, Bajrami
, 
Shala Ahmet

Shala Ahmet

University of Prishtina “Hasan Prishtina”, Faculty of Mechanical Engineering, Department of Mechatronics, Pristina, Bregu i Diellit, p.n.10000Prishtinë, Kosovës
Suche nach diesem Autor auf
Sciendo|Google Scholar
Ahmet, Shala
, 
Hoxha Gezim

Hoxha Gezim

University of Prishtina “Hasan Prishtina”, Faculty of Mechanical Engineering, Department of Mechatronics, Pristina, Bregu i Diellit, p.n.10000Prishtinë, Kosovës
Suche nach diesem Autor auf
Sciendo|Google Scholar
Gezim, Hoxha
 und 
Likaj Rame

Likaj Rame

University of Prishtina “Hasan Prishtina”, Faculty of Mechanical Engineering, Department of Mechatronics, Pristina, Bregu i Diellit, p.n.10000Prishtinë, Kosovës
Suche nach diesem Autor auf
Sciendo|Google Scholar
Rame, Likaj
  
Uneingeschränkter Zugang | 06. Dez. 2018
Influence of in-Plane Deformation in Higher Order Beam Theories
Evangelos Sapountzakis

Evangelos Sapountzakis

Institute of Structural Analysis and Antiseismic Research, School of Civil Engineering, National Technical University of Athens,Athens, Greece
Suche nach diesem Autor auf
Sciendo|Google Scholar
Sapountzakis, Evangelos
 und 
Amalia Argyridi

Amalia Argyridi

Institute of Structural Analysis and Antiseismic Research, School of Civil Engineering, National Technical University of Athens,Athens, Greece
Suche nach diesem Autor auf
Sciendo|Google Scholar
Argyridi, Amalia
  
Uneingeschränkter Zugang | 06. Dez. 2018
Mathematical Model for Velocity Calculation of Three Types of Vehicles in the Case of Pedestrian Crash
Hoxha Gëzim

Hoxha Gëzim

University of Prishtina “Hasan Prishtina”, Faculty of Mechanical Engineering, Department of Mechatronics, Pristina, Bregu i Diellit, p.n.10000Prishtinë, Kosovës
Suche nach diesem Autor auf
Sciendo|Google Scholar
Gëzim, Hoxha
, 
Shala Ahmet

Shala Ahmet

University of Prishtina “Hasan Prishtina”, Faculty of Mechanical Engineering, Department of Mechatronics, Pristina, Bregu i Diellit, p.n.10000Prishtinë, Kosovës
Suche nach diesem Autor auf
Sciendo|Google Scholar
Ahmet, Shala
, 
Likaj Ramë

Likaj Ramë

University of Prishtina “Hasan Prishtina”, Faculty of Mechanical Engineering, Department of Mechatronics, Pristina, Bregu i Diellit, p.n.10000Prishtinë, Kosovës
Suche nach diesem Autor auf
Sciendo|Google Scholar
Ramë, Likaj
 und 
Bajrami Xhevahir

Bajrami Xhevahir

University of Prishtina “Hasan Prishtina”, Faculty of Mechanical Engineering, Department of Mechatronics, Pristina, Bregu i Diellit, p.n.10000Prishtinë, Kosovës
Suche nach diesem Autor auf
Sciendo|Google Scholar
Xhevahir, Bajrami
  
Uneingeschränkter Zugang | 06. Dez. 2018
Do not be Afraid of Small High-Speed Francis Turbines
Koudelka Libor

Koudelka Libor

Development of Water Turbines, Strojírny Brno, ,Blanenská 55, 664 34Kuřim, Czech Republic
Suche nach diesem Autor auf
Sciendo|Google Scholar
Libor, Koudelka
  
Uneingeschränkter Zugang | 06. Dez. 2018
Optimization of Sluice Gate under Fatigue Life Subjected for Forced Vibration by Fluid Flow
Handral Poornakanta

Handral Poornakanta

UG Students of School of Mechanical Engineering, KLE Technological University, Vidya Nagar, Hubli-580031,Karnataka, India
Suche nach diesem Autor auf
Sciendo|Google Scholar
Poornakanta, Handral
, 
Kartik Kadam

Kartik Kadam

UG Students of School of Mechanical Engineering, KLE Technological University, Vidya Nagar, Hubli-580031,Karnataka, India
Suche nach diesem Autor auf
Sciendo|Google Scholar
Kadam, Kartik
, 
Darshan Pawar

Darshan Pawar

UG Students of School of Mechanical Engineering, KLE Technological University, Vidya Nagar, Hubli-580031,Karnataka, India
Suche nach diesem Autor auf
Sciendo|Google Scholar
Pawar, Darshan
, 
Kiran Medar

Kiran Medar

UG Students of School of Mechanical Engineering, KLE Technological University, Vidya Nagar, Hubli-580031,Karnataka, India
Suche nach diesem Autor auf
Sciendo|Google Scholar
Medar, Kiran
, 
Iliyas Makandar

Iliyas Makandar

UG Students of School of Mechanical Engineering, KLE Technological University, Vidya Nagar, Hubli-580031,Karnataka, India
Suche nach diesem Autor auf
Sciendo|Google Scholar
Makandar, Iliyas
, 
Arun Y. Patil

Arun Y. Patil

Faculty of School of Mechanical Engineering, KLE Technological University, Vidya Nagar, Hubli-580031,Karnataka, India
Suche nach diesem Autor auf
Sciendo|Google Scholar
Patil, Arun Y.
 und 
Basavaraj B. Kotturshettar

Basavaraj B. Kotturshettar

Faculty of School of Mechanical Engineering, KLE Technological University, Vidya Nagar, Hubli-580031,Karnataka, India
Suche nach diesem Autor auf
Sciendo|Google Scholar
Kotturshettar, Basavaraj B.
  
Uneingeschränkter Zugang | 06. Dez. 2018
Detection and Modeling Vibrational Behavior of a Gas Turbine Based on Dynamic Neural Networks Approach
Mohamed Benrahmoune

Mohamed Benrahmoune

  • Applied Automation and Industrial Diagnostics Laboratory, University of Djelfa,Djelfa, Algeria
  • Gas Turbine Joint Research Team, University of Djelfa,Djelfa, Algeria
Suche nach diesem Autor auf
Sciendo|Google Scholar
Benrahmoune, Mohamed
, 
Hafaifa Ahmed

Hafaifa Ahmed

  • Applied Automation and Industrial Diagnostics Laboratory, University of Djelfa,Djelfa, Algeria
  • Gas Turbine Joint Research Team, University of Djelfa,Djelfa, Algeria
Suche nach diesem Autor auf
Sciendo|Google Scholar
Ahmed, Hafaifa
, 
Guemana Mouloud

Guemana Mouloud

Science and Technology Faculty, Médéa University,Médéa, Algeria
Suche nach diesem Autor auf
Sciendo|Google Scholar
Mouloud, Guemana
 und 
Chen XiaoQi

Chen XiaoQi

Department of Mechanical Engineering, University of Canterbury,Christchurch, New Zealand
Suche nach diesem Autor auf
Sciendo|Google Scholar
XiaoQi, Chen
  
Uneingeschränkter Zugang | 06. Dez. 2018
Rooppur Nuclear Power Plant: Current Status & Feasibility
Saha Sabhasachi

Saha Sabhasachi

Faculty of Mechanical Engineering, Rajshahi University of Engineering & Technology, Department of Industrial & Production Engineering,Rajshahi, Bangladesh
Suche nach diesem Autor auf
Sciendo|Google Scholar
Sabhasachi, Saha
, 
Roy Koushik

Roy Koushik

Faculty of Civil Engineering, Khulna University of Engineering & Technology, Department of Civil Engineering,Khulna, Bangladesh
Suche nach diesem Autor auf
Sciendo|Google Scholar
Koushik, Roy
, 
Roy Souvik

Roy Souvik

Faculty of Mechanical Engineering, Rajshahi University of Engineering & Technology, Department of Industrial & Production Engineering,Rajshahi, Bangladesh
Suche nach diesem Autor auf
Sciendo|Google Scholar
Souvik, Roy
, 
Rahman Md. Asfakur

Rahman Md. Asfakur

Faculty of Mechanical Engineering, Rajshahi University of Engineering & Technology, Department of Industrial & Production Engineering,Rajshahi, Bangladesh
Suche nach diesem Autor auf
Sciendo|Google Scholar
Md. Asfakur, Rahman
 und 
Hasan Md. Zahid

Hasan Md. Zahid

Faculty of Mechanical Engineering, Rajshahi University of Engineering & Technology, Department of Industrial & Production Engineering,Rajshahi, Bangladesh
Suche nach diesem Autor auf
Sciendo|Google Scholar
Md. Zahid, Hasan
  
Uneingeschränkter Zugang | 06. Dez. 2018
Analysis of Bolt Bending in Preloaded Bolted Joints
Michael Welch

Michael Welch

Michael A Welch (Consulting Engineers) Limited, WestLancashire, UK
Suche nach diesem Autor auf
Sciendo|Google Scholar
Welch, Michael
  
Uneingeschränkter Zugang | 06. Dez. 2018
Optimization of Process Parameters for FSW of Al-Mg-Mn-Sc-Zr Alloy Using CCD And RSM
Mallipudi Srinivasa Rao

Mallipudi Srinivasa Rao

Research Scholar of Mechanical Engineering, Andhra University College of Engineering (A), Andhra University, Visakhapatnam,Andhra Pradesh, India
Suche nach diesem Autor auf
Sciendo|Google Scholar
Srinivasa Rao, Mallipudi
 und 
Nallu Ramanaiah

Nallu Ramanaiah

Professor of Mechanical Engineering, Andhra University College of Engineering (A), Andhra University, Visakhapatnam,Andhra Pradesh, India
Suche nach diesem Autor auf
Sciendo|Google Scholar
Ramanaiah, Nallu
  
Uneingeschränkter Zugang | 06. Dez. 2018
Frequency Response Function Measurement on Simplified Disc Brake Model
Úradníček Juraj

Úradníček Juraj

Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Institute of Manufacturing Systems, Environmental Technology and Quality Management, Námestie slobody 17, 812 31Bratislava, Slovak Republic
Suche nach diesem Autor auf
Sciendo|Google Scholar
Juraj, Úradníček
, 
Miloš Musil

Miloš Musil

Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Institute of Applied Mechanics and Mechatronics, Námestie slobody 17, 812 31Bratislava, Slovak Republic
Suche nach diesem Autor auf
Sciendo|Google Scholar
Musil, Miloš
 und 
Michal Bachratý

Michal Bachratý

Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Institute of Manufacturing Systems, Environmental Technology and Quality Management, Námestie slobody 17, 812 31Bratislava, Slovak Republic
Suche nach diesem Autor auf
Sciendo|Google Scholar
Bachratý, Michal
  
Uneingeschränkter Zugang | 06. Dez. 2018
Determination of Tungsten Inert Gas Welding Input Parameters to Attain Maximum Tensile Strength of 316L Austenitic Stainless Steel
Subhas Chandra Moi

Subhas Chandra Moi

Jadavpur University, Department of Mechanical Engineering,Kolkata, India
Suche nach diesem Autor auf
Sciendo|Google Scholar
Moi, Subhas Chandra
, 
Pradip Kumar Pal

Pradip Kumar Pal

Jadavpur University, Department of Mechanical Engineering,Kolkata, India
Suche nach diesem Autor auf
Sciendo|Google Scholar
Pal, Pradip Kumar
, 
Asish Bandyopadhyay

Asish Bandyopadhyay

Jadavpur University, Department of Mechanical Engineering,Kolkata, India
Suche nach diesem Autor auf
Sciendo|Google Scholar
Bandyopadhyay, Asish
 und 
Ramesh Rudrapati

Ramesh Rudrapati

Hawassa University - Institute of Technology, Department of Mechanical Engineering,Hawassa, Ethiopia
Suche nach diesem Autor auf
Sciendo|Google Scholar
Rudrapati, Ramesh
  
Uneingeschränkter Zugang | 06. Dez. 2018
Some Facts Resulting from the Key Variables Used in the Description of the Recuperative Heat Exchangers
Štefan Gužela

Štefan Gužela

Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Nám. slobody 17, 812 31Bratislava, Slovak Republic
Suche nach diesem Autor auf
Sciendo|Google Scholar
Gužela, Štefan
 und 
František Dzianik

František Dzianik

Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Nám. slobody 17, 812 31Bratislava, Slovak Republic
Suche nach diesem Autor auf
Sciendo|Google Scholar
Dzianik, František
  
Uneingeschränkter Zugang | 06. Dez. 2018
The Influence of Material on the Operational Characteristics of Spur Gears Manufactured by the 3D Printing Technology
Aleksandar Dimić

Aleksandar Dimić

University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11120Belgrade, Serbia
Suche nach diesem Autor auf
Sciendo|Google Scholar
Dimić, Aleksandar
, 
Žarko Mišković

Žarko Mišković

University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11120Belgrade, Serbia
Suche nach diesem Autor auf
Sciendo|Google Scholar
Mišković, Žarko
, 
Radivoje Mitrović

Radivoje Mitrović

University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11120Belgrade, Serbia
Suche nach diesem Autor auf
Sciendo|Google Scholar
Mitrović, Radivoje
, 
Mileta Ristivojević

Mileta Ristivojević

University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11120Belgrade, Serbia
Suche nach diesem Autor auf
Sciendo|Google Scholar
Ristivojević, Mileta
, 
Zoran Stamenić

Zoran Stamenić

University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11120Belgrade, Serbia
Suche nach diesem Autor auf
Sciendo|Google Scholar
Stamenić, Zoran
, 
Ján Danko

Ján Danko

Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Institute of Transport Technology and Designing, Nám. Slobody 17,812 31Bratislava, Slovakia
Suche nach diesem Autor auf
Sciendo|Google Scholar
Danko, Ján
, 
Jozef Bucha

Jozef Bucha

Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Institute of Transport Technology and Designing, Nám. Slobody 17,812 31Bratislava, Slovakia
Suche nach diesem Autor auf
Sciendo|Google Scholar
Bucha, Jozef
 und 
Tomáš Milesich

Tomáš Milesich

Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Institute of Transport Technology and Designing, Nám. Slobody 17,812 31Bratislava, Slovakia
Suche nach diesem Autor auf
Sciendo|Google Scholar
Milesich, Tomáš
  
Uneingeschränkter Zugang | 06. Dez. 2018
Express Method to Estimate Structural Imperfection and Bone Tissue Status
Mykola Chausov

Mykola Chausov

National University of Life and Environmental Sciences of Ukraine,Kyiv, Ukraine
Suche nach diesem Autor auf
Sciendo|Google Scholar
Chausov, Mykola
, 
Andrii Pylypenko

Andrii Pylypenko

National University of Life and Environmental Sciences of Ukraine,Kyiv, Ukraine
Suche nach diesem Autor auf
Sciendo|Google Scholar
Pylypenko, Andrii
, 
Pavlo Maruschak

Pavlo Maruschak

Ternopil Ivan Pul’uj National Technical University,Ternopil, Ukraine
Suche nach diesem Autor auf
Sciendo|Google Scholar
Maruschak, Pavlo
, 
Svitlana Tkachuk

Svitlana Tkachuk

National University of Life and Environmental Sciences of Ukraine,Kyiv, Ukraine
Suche nach diesem Autor auf
Sciendo|Google Scholar
Tkachuk, Svitlana
 und 
Abdellah Menou

Abdellah Menou

International Academy of Civil Aviation,Casablanca, Morocco
Suche nach diesem Autor auf
Sciendo|Google Scholar
Menou, Abdellah
  
Uneingeschränkter Zugang | 06. Dez. 2018
Adaptive Car Following Model
Péter Mika

Péter Mika

Multidisciplinary Graduate School of Engineering Sciences, Department of Mechatronics and Machine Design, Egyetem tér 1., 9026Győr, Hungary
Suche nach diesem Autor auf
Sciendo|Google Scholar
Mika, Péter
  

Suche

Alle Bände und Hefte dieser Zeitschrift

Sprache:
Englisch
Zeitrahmen der Veröffentlichung:
2 Hefte pro Jahr
Fachgebiete der Zeitschrift:
Technik, Maschinenbau, Grundlagen des Maschinenbaus, Mechanik
Zeitschrift RSS Feed