<abstract xmlns="http://www.w3.org/1999/xhtml">

Any underground work requires the knowledge and application of appropriate techniques and technologies in all stages of implementation of such a project. An important problem in the design of underground works is the knowledge of the characteristics and behaviour of the massif in which the work will be carried out. It depends on the choice of the excavation solution appropriate to the existing real conditions, which will influence the duration of the work and the costs associated with it. The objective of this paper was to analyse and compare the total deformations of the contour of the underground work, assuming that the work is performed by sequential excavation method (S.E.M.): excavation in the horizontal direction and in the vertical direction. The finite element numerical simulation method was used for the convergence analysis, which showed that the total displacements of the tunnel gallery wall are smaller for the horizontal sequential excavation (SEM) variant, both for the hypothesis of coefficient of pressure in state of rest having the value K0 = 0.6, as well as for the hypothesis in which K0 = 2.27.
</abstract>

Finite Element Method for Designing Large Section Underground Works by Sequential Excavation Method. Study Case: Lugoj-Deva Road Tunnel

<abstract xmlns="http://www.w3.org/1999/xhtml">

The paper presents the level of heavy metal contamination in the areas located in the vicinity of the mining perimeters in Baia Mare and Băiuț and the risk of their expansion in the future. Heavy metal contamination was analysed on water samples from wells, plants and milk from animals that consumed water from polluted streams.
</abstract>

Determinations and Interpretations of the Contents of Heavy Metals from Food and Water Test Samples from Locations Near the Mining Perimeters of Baia Mare and Băiuț Area

<abstract xmlns="http://www.w3.org/1999/xhtml">

One of the most important wastes in iron metallurgy is the blast furnace sludge. This sludge consists of fine particles of iron ore, coke and fine particles of flux. The furnace sludge is characterized by the chemical composition similar to that of the furnace load, the major difference being the concentration of zinc and lead. Due to the similarity with the blast furnace load, this material, after pelletization, can be recycled in the technological process. However, this recirculation is limited by the zinc content, which significantly disrupts the operation of the furnace. This paper presents tests to reduce the zinc content of the furnace sludge by hydrometallurgical and pyrometalurgical processes.
</abstract>

Research Regarding Iron Sludge Recovery Technology

<abstract xmlns="http://www.w3.org/1999/xhtml">

Bulqiza chrome mine is one of the most important chromium mines and mining activities in Albania. It is the deepest mine in the Balkans and possibly even in Europe. Recently, the inner shaft of the mine reached a depth of 1000 m, measured from the surface, or −180 m below sea level. Like all deep metal mines, this mine also faces a different set of challenges during its development. The first and most important challenge is that of improving the degree of geological research and knowledge of this mine and assessment of geological resources and reserves according to JORC Code 2012 edition. In addition, a series of other challenges related to increasing the depth of the mine represent the object of this paper: rock and ore stability and the underground voids support; improvement of mining methods and technologies; groundwater and its pumping; temperature, air parameters and mine ventilation. Among other things, these problems were solved using various computation and simulation programs.
</abstract>

New Challenges to the Deep Development of the Bulqiza Chrome Mines

<abstract xmlns="http://www.w3.org/1999/xhtml">

This article gives an overview of solid waste and tailing generated by the mining activity over the years in Albania. It presents the geographical distribution of the disposal areas giving a quantitative and qualitative assessment of this waste. It reveals that the best approach to deal with mining waste is their recycling to recover lost mineral products deposited in the mining waste and tailing dam. This loss is due to the type of technology used over the years in mines and to the low efficiency of the processing equipment; nonetheless, the new treatment methods can represent a great potential for the recycling industries in the mining activity. At the same time the rehabilitation of the disposal areas is of great importance.
</abstract>

Department of Mineral Resources Engineering; Faculty of Mining Geology

Mineral Waste, Recycling and Rehabilitation of their Disposal Areas

<abstract xmlns="http://www.w3.org/1999/xhtml">

The paper presents a brief history of Bronze Age gold to the Middle Ages, as well as its properties, minerals and deposits, alloys, uses and recycling.
</abstract>

Gold: Properties, Minerals, Alloys, Uses and Recycling

<abstract xmlns="http://www.w3.org/1999/xhtml">

Topography has an important role in the realization of underground mining works, hydro-technical constructions, roads, etc. Appropriate topographic measurements and processing are required to trace these objectives in the necessary safety and efficiency conditions. An appropriate topographic basis must first be established for which scientific analyzes focusing mainly on topographical guidance elements are required. It is considered an independent polygonal route, easy to achieve and with superior quality effects.
</abstract>

Mining Engineering, Surveying and Civil Engineering Department

Analysis of Orientation Accuracies in Underground Polygonal Routes

<abstract xmlns="http://www.w3.org/1999/xhtml">

This paper presents a scientific research in the field of the risk assessment, in order to secure the activities carried out in the presence of specific hazards of industrial work systems. The methodology for quantifying the risk of occupational is an innovative tool which highlights the analytical solution for quantify the occupational risks with impact, both on the human component, as well as at the level of the other component elements specific to the work systems.
</abstract>

Department of Mechanical, Industrial and Transports Engineering

Methodology for Quantifying the Risk of Occupational Accident and / or Disease Specific to Complex Technical Systems

AHEAD OF PRINT

Volume 30 (2024): Issue 2 (June 2024)

Volume 30 (2024): Issue 1 (March 2024)

Volume 29 (2023): Issue 4 (December 2023)

Volume 29 (2023): Issue 3 (September 2023)

Volume 29 (2023): Issue 2 (June 2023)

Volume 29 (2023): Issue 1 (March 2023)

Volume 28 (2022): Issue 4 (December 2022)

Volume 28 (2022): Issue 3 (September 2022)

Volume 28 (2022): Issue 2 (June 2022)

Volume 28 (2022): Issue 1 (March 2022)

Volume 27 (2021): Issue 4 (December 2021)

Volume 27 (2021): Issue 3 (September 2021)

Volume 27 (2021): Issue 2 (June 2021)

Volume 27 (2021): Issue 1 (March 2021)

Mining Revue

 Revista Minelor/Mining Revue (MinRv), ISSN-L 1220-2053/ISSN 2247-8590, is an official journal of the University of Petrosani, Romania, published quarterly both printed and online.  It is an international open-access, peer-reviewed journal focusing on the development and exchange of scientific and technical aspects (novelties) in the broad field of mining sciences.  We welcome contributions (research papers, reports and reviews) presenting original theoretical, experimental studies and computer simulation and modelling, including but not limited to, the following topics:   Underground/Open Pit Mining (mining technologies, stability of underground mining workings, blasting, ventilation, tunnelling);  Mining mechanization, mining transport, deep hole drilling;  Rock mechanics and geotechnical engineering;  Geology and mine surveying;  Hydrogeology (hydrogeology of surface and underground mining, mine water, dewatering and rebound);  Environmental impact assessment;  Mine waste management;  Raw materials extraction, utilization and processing;  Mine closure and site reclamation;  Occupational health and safety;  Mine planning and design;  Mining process control and optimization;  Reliability, maintenance and overall performance of mining systems;  Risk assessment and management in mining and mineral engineering.   The editors will consider papers on other topics related to mining and environmental issues.  All published research articles in this journal have undergone rigorous peer review, based on initial editor screening and review by independent experts.  The journal is intended for academic scientists, industry and applied researchers, and policy and decision makers.  All necessary information about publishing in Revista minelor – Mining Revue can be found on our website. In addition, the available archive of the journal from 2021 in open access as well as the previous volumes (older than 2021) can also be found on the website of the UNIVERSITY OF PETROȘANI, at www.upet.ro/revistaminelor/eng.php   Archiving  Sciendo archives the contents of this journal in Portico - digital long-term preservation service of scholarly books, journals and collections.  Plagiarism Policy  The editorial board is participating in a growing community of Similarity Check System's users in order to ensure that the content published is original and trustworthy. Similarity Check is a medium that allows for comprehensive manuscripts screening, aimed to eliminate plagiarism and provide a high standard and quality peer-review process. 