<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Electric multiple units (EMUs) EN57 are fitted with two cage induction motors to each bogie. Two motors driving one bogie are supplied from a common DC/AC inverter. These motors become damaged after a short service period; the end-rings start to break away, start to break away. The results of service tests conducted during normal train runs are presented in the paper. The investigation possibilities were limited to recording load currents and vibrations of four motors installed at two bogies of one car. It has been concluded that the reason for rotor winding damage may be traced back to the simultaneous impact of four factors: 1) transmission of load torque by mechanical gearbox; there is a backlash between the pinion mounted at the motor shaft and the toothed gear mounted at the drive bogie axle; 2) rigid assembly of the motor in the bogie frame and vibrations transmitted from the drive wheels to motor; 3) variable components of electromagnetic torque generated by higher harmonics of inverter voltage and current; 4) parallel operation of two unmatched motors supplied from common inverter.</p></abstract>

Electric multiple units (EMUs) EN57 are fitted with two cage induction motors to each bogie. Two motors driving one bogie are supplied from a common DC/AC inverter. These motors become damaged after a short service period; the end-rings start to break away, start to break away. The results of service tests conducted during normal train runs are presented in the paper. The investigation possibilities were limited to recording load currents and vibrations of four motors installed at two bogies of one car. It has been concluded that the reason for rotor winding damage may be traced back to the simultaneous impact of four factors: 1) transmission of load torque by mechanical gearbox; there is a backlash between the pinion mounted at the motor shaft and the toothed gear mounted at the drive bogie axle; 2) rigid assembly of the motor in the bogie frame and vibrations transmitted from the drive wheels to motor; 3) variable components of electromagnetic torque generated by higher harmonics of inverter voltage and current; 4) parallel operation of two unmatched motors supplied from common inverter.

Induction motors in traction drives, service tests

Institute of Electrical Drives and Machines KOMEL

Technical Transactions

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

{"article-title":"Induction motors in traction drives, service tests"}

Electric multiple units (EMUs) EN57 are fitted with two cage induction motors to each bogie. Two motors driving one bogie are supplied from a common DC/AC...

Induction motors in traction drives, service tests

Online veröffentlicht: 21. Mai 2020

Seitenbereich: 85 - 98

Eingereicht: 19. Sept. 2018

DOI: https://doi.org/10.4467/2353737XCT.18.147.9095

Schlüsselwörter
cage induction motors, traction drive systems, service tests, rotor winding failure

© 2019 Jakub Bernatt et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

Induction motors in traction drives, service tests

Online veröffentlicht: 21. Mai 2020

Seitenbereich: 85 - 98

Eingereicht: 19. Sept. 2018

DOI: https://doi.org/10.4467/2353737XCT.18.147.9095

Schlüsselwörtercage induction motors, traction drive systems, service tests, rotor winding failure

© 2019 Jakub Bernatt et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

Schlüsselwörter
cage induction motors, traction drive systems, service tests, rotor winding failure