<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The mechanical properties of manufactured composites based on polyoxymethylene (Tarnoform 300) were determined. POM composites reinforced with ultra-high molecular weight silicon, thermoplastic polyurethane, and special chalk in order to reduce abrasiveness and aramid fibres were manufactured. The basic mechanical properties (tensile strength (σM), modulus of elasticity (Et), strain at break (εB), flexural modulus (Ef) and flexural stress at 3.5% strain (σs)) were evaluated at three temperatures -20, 20 and 80°C. The density and Charpy impact of the produced composites were examined. In order to make reference to the effects of reinforcement and determine the characteristics of their microstructure SEM, images were taken.</p></abstract>

The mechanical properties of manufactured composites based on polyoxymethylene (Tarnoform 300) were determined. POM composites reinforced with ultra-high molecular weight silicon, thermoplastic polyurethane, and special chalk in order to reduce abrasiveness and aramid fibres were manufactured. The basic mechanical properties (tensile strength (σM), modulus of elasticity (Et), strain at break (εB), flexural modulus (Ef) and flexural stress at 3.5% strain (σs)) were evaluated at three temperatures -20, 20 and 80°C. The density and Charpy impact of the produced composites were examined. In order to make reference to the effects of reinforcement and determine the characteristics of their microstructure SEM, images were taken.

The Mechanical Characterization of Composites Based on Polyoxymethylene and the Effect of Silicone Addition on the Mechanical Behaviour of Manufactured Composites

Technical Transactions

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

The mechanical properties of manufactured composites based on polyoxymethylene (Tarnoform 300) were determined. POM composites reinforced with ultra-high...

The Mechanical Characterization of Composites Based on Polyoxymethylene and the Effect of Silicone Addition on the Mechanical Behaviour of Manufactured Composites

Online veröffentlicht: 21. Mai 2020

Seitenbereich: 149 - 158

Eingereicht: 04. Apr. 2018

DOI: https://doi.org/10.4467/2353737XCT.18.063.8375

Schlüsselwörter
polyformaldehyde, additives, modification of structure, properties

© 2020 Patrycja Bazan et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

The Mechanical Characterization of Composites Based on Polyoxymethylene and the Effect of Silicone Addition on the Mechanical Behaviour of Manufactured Composites

Online veröffentlicht: 21. Mai 2020

Seitenbereich: 149 - 158

Eingereicht: 04. Apr. 2018

DOI: https://doi.org/10.4467/2353737XCT.18.063.8375

Schlüsselwörterpolyformaldehyde, additives, modification of structure, properties

© 2020 Patrycja Bazan et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

Schlüsselwörter
polyformaldehyde, additives, modification of structure, properties