<abstract xmlns="http://www.w3.org/1999/xhtml"><p>This article presents the results of a durability test of a prototype low-pulsation pump. Hydraulic measurements conducted during the test enabled visualisation of the behaviour of the unit in working conditions. The test was conducted according to a strict factory standard, which states that pump performance parameters cannot decrease by more than 8% during durability testing. The material presented in this publication is the result of a study within the project entitled <italic>The development of innovative gear pumps with a reduced level of acoustic emission</italic>. The solution developed as part of the project has been successfully implemented for a series of gear pumps consisting of twenty-two units. Among other awards, the product won the Gold Medal at the 10<sup>th</sup> International Fair of Pneumatics, Hydraulics, Drives and Controls, Kielce 2017.</p></abstract>

This article presents the results of a durability test of a prototype low-pulsation pump. Hydraulic measurements conducted during the test enabled visualisation of the behaviour of the unit in working conditions. The test was conducted according to a strict factory standard, which states that pump performance parameters cannot decrease by more than 8% during durability testing. The material presented in this publication is the result of a study within the project entitled The development of innovative gear pumps with a reduced level of acoustic emission. The solution developed as part of the project has been successfully implemented for a series of gear pumps consisting of twenty-two units. Among other awards, the product won the Gold Medal at the 10th International Fair of Pneumatics, Hydraulics, Drives and Controls, Kielce 2017.

Durability tests of prototype gear pumps with reduced flow ripple

Wroclaw University of Science and Technology

Technical Transactions

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

{"article-title":"Durability tests of prototype gear pumps with reduced flow ripple"}

This article presents the results of a durability test of a prototype low-pulsation pump. Hydraulic measurements conducted during the test enabled...

Durability tests of prototype gear pumps with reduced flow ripple

Online veröffentlicht: 04. Mai 2020

Seitenbereich: -

Eingereicht: 09. Mai 2019

Akzeptiert: 24. Apr. 2020

DOI: https://doi.org/10.37705/TechTrans/e2020014

Schlüsselwörter
gear pump, helical gear pump, silent pump, low pulsation pump

© 2020 Piotr Osiński et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

Durability tests of prototype gear pumps with reduced flow ripple

Online veröffentlicht: 04. Mai 2020

Seitenbereich: -

Eingereicht: 09. Mai 2019

Akzeptiert: 24. Apr. 2020

DOI: https://doi.org/10.37705/TechTrans/e2020014

Schlüsselwörtergear pump, helical gear pump, silent pump, low pulsation pump

© 2020 Piotr Osiński et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

Schlüsselwörter
gear pump, helical gear pump, silent pump, low pulsation pump