<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The paper presents the results of improving the production process using the SMED method. The process improvement was carried out in a company in the construction industry, using a machine park consisting of CNC machines. The study evaluated the current state of changeover times for selected CNC machines and proposed a reduction in changeover times for the machine park analysed. By introducing changes to the changeover process on selected CNC machines, it was possible to minimise the changeover time by more than 20% on all the machines analysed. The proposed reorganisation of the CNC operators’ workstations resulted in a time reduction of approximately 61% for machine 1, 52% for machine 2 and 12% for machine 3. The installation of barcode readers on the profiles, on the other hand, made it possible to load the machining programmes into the CNC machines more quickly and resulted in a reduction in loading time of approximately 88% on average for each of the machines analysed.</p>
</abstract>

The paper presents the results of improving the production process using the SMED method. The process improvement was carried out in a company in the construction industry, using a machine park consisting of CNC machines. The study evaluated the current state of changeover times for selected CNC machines and proposed a reduction in changeover times for the machine park analysed. By introducing changes to the changeover process on selected CNC machines, it was possible to minimise the changeover time by more than 20% on all the machines analysed. The proposed reorganisation of the CNC operators’ workstations resulted in a time reduction of approximately 61% for machine 1, 52% for machine 2 and 12% for machine 3. The installation of barcode readers on the profiles, on the other hand, made it possible to load the machining programmes into the CNC machines more quickly and resulted in a reduction in loading time of approximately 88% on average for each of the machines analysed.

Analysis of the Possibility of Introducing the Reduction of Changeover Time of Selected CNC Machines Using the SMED Method

Production Engineering Archives

This work is licensed under the Creative Commons Attribution 4.0 International License.

The paper presents the results of improving the production process using the SMED method. The process improvement was carried out in a company in the...

Analysis of the Possibility of Introducing the Reduction of Changeover Time of Selected CNC Machines Using the SMED Method

Online veröffentlicht: 15. Feb. 2023

Seitenbereich: 83 - 93

Eingereicht: 01. Nov. 2022

Akzeptiert: 10. Jan. 2023

DOI: https://doi.org/10.30657/pea.2023.29.10

Schlüsselwörter
Lean manufacturing tools, Improving the manufacturing process, SMED, Machine retooling

© 2023 Beata Oleksiak et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Analysis of the Possibility of Introducing the Reduction of Changeover Time of Selected CNC Machines Using the SMED Method

Online veröffentlicht: 15. Feb. 2023

Seitenbereich: 83 - 93

Eingereicht: 01. Nov. 2022

Akzeptiert: 10. Jan. 2023

DOI: https://doi.org/10.30657/pea.2023.29.10

SchlüsselwörterLean manufacturing tools, Improving the manufacturing process, SMED, Machine retooling

© 2023 Beata Oleksiak et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Schlüsselwörter
Lean manufacturing tools, Improving the manufacturing process, SMED, Machine retooling