<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Aluminum alloy 7075-T651 is a widely used material in the aviation, marine, and automobile sectors. The wide application marks the importance of this material’s research in the manufacturing field. This research focuses on optimizing input process parameters of the turning process in the machining of Aluminum 7075-T651 with a tungsten carbide insert. The input machining parameters are cutting speed, feed, and depth of cut for the output response parameters cutting force, feed force, radial force, material removal, and surface roughness of the workpiece. For optimization of process parameters, the Taguchi method, with standard L9 orthogonal array, is used. ANOVA is applied to obtain signifi-cant factors and optimal combinations of process parameters.</p>
</abstract>

Aluminum alloy 7075-T651 is a widely used material in the aviation, marine, and automobile sectors. The wide application marks the importance of this material’s research in the manufacturing field. This research focuses on optimizing input process parameters of the turning process in the machining of Aluminum 7075-T651 with a tungsten carbide insert. The input machining parameters are cutting speed, feed, and depth of cut for the output response parameters cutting force, feed force, radial force, material removal, and surface roughness of the workpiece. For optimization of process parameters, the Taguchi method, with standard L9 orthogonal array, is used. ANOVA is applied to obtain signifi-cant factors and optimal combinations of process parameters.

Experimental Investigation and Optimization of Machining Parameters in Turning of Aluminum Alloy 075-T651

Production Engineering Archives

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

Aluminum alloy 7075-T651 is a widely used material in the aviation, marine, and automobile sectors. The wide application marks the importance of this...

Experimental Investigation and Optimization of Machining Parameters in Turning of Aluminum Alloy 075-T651

Online veröffentlicht: 20. Nov. 2021

Seitenbereich: 296 - 305

Eingereicht: 13. Juni 2021

Akzeptiert: 13. Okt. 2021

DOI: https://doi.org/10.30657/pea.2021.27.40

Schlüsselwörter
Taguchi Method, Feed Force, Cutting Force, Radial Force, MRR

© 2020 Arpit Srivastava et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

Experimental Investigation and Optimization of Machining Parameters in Turning of Aluminum Alloy 075-T651

Online veröffentlicht: 20. Nov. 2021

Seitenbereich: 296 - 305

Eingereicht: 13. Juni 2021

Akzeptiert: 13. Okt. 2021

DOI: https://doi.org/10.30657/pea.2021.27.40

SchlüsselwörterTaguchi Method, Feed Force, Cutting Force, Radial Force, MRR

© 2020 Arpit Srivastava et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

Schlüsselwörter
Taguchi Method, Feed Force, Cutting Force, Radial Force, MRR