[
Azizov, T.N., Kochkarev, D.V., Galinska, T.A., 2019. New design concepts for strengthening of continuous reinforced-concrete beams. IOP Conference Series: Materials Science and Engineering, 708(1).10.1088/1757-899X/708/1/012040
]Search in Google Scholar
[
Blikharskyy, Y., Kopiika, N. and Selejdak, J., 2020. Non-uniform corrosion of steel rebar and its influence on reinforced concrete elements` reliability. Production Engineering Archives, 26(2), 67–72.10.30657/pea.2020.26.14
]Search in Google Scholar
[
Blikharskyy, Y., Vashkevych, R., Kopiika, N., Bobalo, T., Blikharskyy, Z., 2021. Calculation residual strength of reinforced concrete beams with damages, which occurred during loading. IOP Conference Series: Materials Science and Engineering,1021(1).10.1088/1757-899X/1021/1/012012
]Search in Google Scholar
[
Bobalo, T., Blikharskyy, Y., Kopiika, N., Volynets, M., 2021. Influence of the Percentage of Reinforcement on the Compressive Forces Loss in Pre-stressed RC Beams Strengthened with a Package of Steel Bars. Lecture Notes in Civil Engineering, 100, 53–62.10.1007/978-3-030-57340-9_7
]Search in Google Scholar
[
Czajkowska, A., Ingaldi, M., 2019. Analysis of the impact of individual phases in the building process cycle on the environment with respect to the principles of sustainable development. IOP Conference Series: Earth and Environmental Science, 214(1), 012012. DOI: 10.1088/1755-1315/214/1/01201210.1088/1755-1315/214/1/012012
]Search in Google Scholar
[
Fomin, O., Vatulia, G., Horbunov, M., Lovska, A., Píštěk, V., Kučera, P., 2021. Determination of residual resource of flat wagons load-bearing structures with a 25-year service life. IOP Conference Series: Materials Science and Engineering, 1021(10).10.1088/1757-899X/1021/1/012005
]Search in Google Scholar
[
Karpiuk, V., Somina, Y., Maistrenko, O., 2019. Engineering Method of Calculation of Beam Structures Inclined Sections Based on the Fatigue Fracture Model. Lecture Notes in Civil Engineering, 47, 135–144.10.1007/978-3-030-27011-7_17
]Search in Google Scholar
[
Khmil, R.Y., Tytarenko, R.Y., Blikharskyy, Y.Z., Vegera, P.I., 2021a. Improvement of the method of probability evaluation of the failure-free operation of reinforced concrete beams strengthened under load. IOP Conference Series: Materials Science and Engineering, 1021(1).10.1088/1757-899X/1021/1/012014
]Search in Google Scholar
[
Khmil, R., Tytarenko, R., Blikharskyy, Y., Vegera, P., 2021b. The Probabilistic Calculation Model of RC Beams, Strengthened by RC Jacket. Lecture Notes in Civil Engineering, 100, 182–191.10.1007/978-3-030-57340-9_23
]Search in Google Scholar
[
Klymenko, Y., Grynyova, I., Kos, Z., 2019. The method of calculating the bearing capacity of compressed stone pillars. Lecture Notes in Civil Engineering, 47, 161–167.10.1007/978-3-030-27011-7_20
]Search in Google Scholar
[
Klymenko, Y., Kos, Z., Grynyova, I., Maksiuta, O., 2020. Operation of Damaged H-Shaped Columns. Lecture Notes in Civil Engineering, 100, 192–201.10.1007/978-3-030-57340-9_24
]Search in Google Scholar
[
Kochkarev, D., Azizov, T., Galinska, T., 2020. Design of Effective Statically Indeterminate Reinforced Concrete Beams. Lecture Notes in Civil Engineering, 73, 83–93, DOI: 10.1007/978-3-030-42939-3_1010.1007/978-3-030-42939-3_10
]Search in Google Scholar
[
Kotes, P., Strieska, M., Brodnan, M., 2018. Sensitive analysis of calculation of corrosion rate according to standard approach. IOP Conference Series: Materials Science and Engineering, 385(1), 012031, DOI: 10.1088/1757-899X/385/1/01203110.1088/1757-899X/385/1/012031
]Search in Google Scholar
[
Koteš, P., Vavruš, M., Jošt, J., Prokop, J., 2020. Strengthening of concrete column by using the wrapper layer of fibre reinforced concrete. Materials, 12(23), 1–21, DOI: 10.3390/ma1323543210.3390/ma13235432773098333260664
]Search in Google Scholar
[
Kramarchuk, A., Ilnytskyy, B., Bobalo, T., Lytvyniak, O., (2021). A study of bearing capacity of reinforced masonry beams with GFRP reinforcement. IOP Conference Series: Materials Science and Engineering, 1021(1).
]Search in Google Scholar
[
Lipiński, T., 2017. Roughness of 1.0721 steel after corrosion tests in 20% NaCl. Production Engineering Archives, 15(15), 27–30.
]Search in Google Scholar
[
Lobodanov, M., Vegera, P., Khmil, R., Blikharskyy, Z., 2021. Influence of Damages in the Compressed Zone on Bearing Capacity of Reinforced Concrete Beams. Lecture Notes in Civil Engineering, 100, 260–267.10.1007/978-3-030-57340-9_32
]Search in Google Scholar
[
Pavlikov, A., Kochkarev, D., Harkava, O., 2019. Calculation of reinforced concrete members strength by new concept. Proceedings of the fib Symposium 2019, Concrete - Innovations in Materials, Design and Structures, 820–827.
]Search in Google Scholar
[
Turba, Y., Solodkyy, S., 2021. Crack Resistance of Concretes Reinforced with Polypropylene Fiber. Lecture Notes in Civil Engineering, 100, 474–481, DOI: 10.1007/978-3-030-57340-9_5810.1007/978-3-030-57340-9_58
]Search in Google Scholar
[
Ulewicz, R., Ulewicz, M., 2020. Problems in the Implementation of the Lean Concept in the Construction Industries. Lecture Notes in Civil Engineering, 47, 495–500, DOI: 10.1007/978-3-030-27011-7_6310.1007/978-3-030-27011-7_63
]Search in Google Scholar
[
Vatulia, G., Lobiak, A., Orel, Y., 2017. Simulation of performance of circular CFST columns under short-time and long-time load. Matec Web of Conferences, 116, 02036, DOI: 10.1051/matecconf/20171160203610.1051/matecconf/201711602036
]Search in Google Scholar
[
Vatulia, G., Rezunenko, M., Petrenko, D., Rezunenko, S., 2018. Evaluation of the carrying capacity of rectangular steel-concrete columns. Civil and Environmental Engineering, 14(1), 76–83. DOI: 10.2478/cee-2018-001010.2478/cee-2018-0010
]Search in Google Scholar
[
Vavruš, M., Koteš, P., 2019. Numerical comparison of concrete columns strengthened with layer of fiber concrete and reinforced concrete. Transportation Research Procedia, 40, 920–926.10.1016/j.trpro.2019.07.129
]Search in Google Scholar
[
Yogalakshmi, N.J., Rao, K.B., Anoop, M.B., 2020. Durability-Based Service Life Design of RC Structures—Chloride-Induced Corrosion. Reliability, Safety and Hazard Assessment for Risk-Based Technologies, Springer, Singapore, 579–590, DOI: 10.1007/978-981-13-9008-1_48.10.1007/978-981-13-9008-1_48
]Search in Google Scholar