<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The tribological properties of the nitride layer applied to the low-alloyed steel were investigated in this research. Experimental work included determination if the chemical composition, wear resistance, Rockwell, Vickers and nano-indentation tests, both of the substrate material – the low-alloyed steel and the deposited nitride layer. From the results obtained in those experiments authors concluded that applying the nitride layer does not significantly improve the tribological properties of the tested lowalloyed steel samples, thus this process is not recommended for achieving that purpose.</p></abstract>

The tribological properties of the nitride layer applied to the low-alloyed steel were investigated in this research. Experimental work included determination if the chemical composition, wear resistance, Rockwell, Vickers and nano-indentation tests, both of the substrate material – the low-alloyed steel and the deposited nitride layer. From the results obtained in those experiments authors concluded that applying the nitride layer does not significantly improve the tribological properties of the tested lowalloyed steel samples, thus this process is not recommended for achieving that purpose.

Tribological behavior of low-alloyed steel after nitriding

Production Engineering Archives

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Tribological behavior of low-alloyed steel after nitriding"}

The tribological properties of the nitride layer applied to the low-alloyed steel were investigated in this research. Experimental work included determination...

Tribological behavior of low-alloyed steel after nitriding

Online veröffentlicht: 29. Sept. 2020

Seitenbereich: 78 - 83

Eingereicht: 11. Mai 2020

Akzeptiert: 07. Juli 2020

DOI: https://doi.org/10.30657/pea.2020.26.16

Schlüsselwörter
low-alloyed steel, nitriding, tribology, behavior

© 2020 Martin Vicen et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Tribological behavior of low-alloyed steel after nitriding

Online veröffentlicht: 29. Sept. 2020

Seitenbereich: 78 - 83

Eingereicht: 11. Mai 2020

Akzeptiert: 07. Juli 2020

DOI: https://doi.org/10.30657/pea.2020.26.16

Schlüsselwörterlow-alloyed steel, nitriding, tribology, behavior

© 2020 Martin Vicen et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
low-alloyed steel, nitriding, tribology, behavior