Corrosion rate of cathodically "protected" steel in carbonate environment

Goidanich, S.; Lazzari, L.; Ormellese, M. AC corrosion - Part 1: Effects on overpotentials of anodic and cathodic processes. Corros. Sci. 2010, 52, 491-497.Search in Google Scholar

Bardal, E. Determination of pH during periodic cathodic polarization of electrodes. Corros. Sci. 1969, 9, 887-901.10.1016/S0010-938X(69)80108-3Search in Google Scholar

Tkalenko, M.; Tkalenko, D.; Kublanovskyi, V. Change in the pH of solutions and the cathodic passivation of metals under the conditions of electrochemical protection in aqueous media. Materials Science 2002, 38 (3), 394-398.10.1023/A:1021777817858Search in Google Scholar

Freiman, L.; Kuznetsova, E. Model investigation of the peculiarities of the corrosion and cathodic protection of steel in the insulation defects on underground steel pipelines. Protection of metals 2001, 37 (5), 484-490.10.1023/A:1012378500386Search in Google Scholar

Glass, G.; Chadwick, J. An investigation into the mecha-nisms of protection afforded by a cathodic current and the implications for advances in the field of cathodic protection. Corros. Sci. 1994, 36 (12), 2193-2209.10.1016/0010-938X(94)90017-5Search in Google Scholar

Perdomo, J.; Chabica, M.; Song, I. Chemical and electrochemical conditions on steel under disbonded coatings: the effect of previously corroded surfaces and wet and dry cycles. Corros. Sci. 2001, 43, 515-532.Search in Google Scholar

Bertolini, L.; Pedeferri, P.; Redaelli, E.; Pastore, T. Repassivation of steel in carbonated concrete induced by cathodic protection. Materials and corrosion 2003, 54, 163-175.Search in Google Scholar

Perdomo, J.; Song, I. Chemical and electrochemical conditions on steel under disbonded coatings: the efect of applied potential, solution resistivity, crevice thickness and holiday size. Corros. Sci. 2000, 42, 1389-1415.10.1016/S0010-938X(99)00136-5Search in Google Scholar

Lyon, S. Corrosion of Carbon and Low Alloy Steels. Shreir's corrosion; Elsevier, 2010; Chapter Electrochemistry, pp 1703-1704; Vol.3.10.1016/B978-044452787-5.00190-6Search in Google Scholar

Kouřil, M.; Novák, P.; Šotka, D. Korozní rychlost železa při katodické polarizaci v alkalickém prostředí. Koroze a ochrana materiálu 2010, 54 (4), 182-186.Search in Google Scholar

Goidanich, S.; Lazzari, L.; Ormellese, M. AC corrosion. Part 2: Parameters influencing corrosion rate. Corros. Sci. 2010, 52, 916-922.Search in Google Scholar

Bardal, E. pH and potential measurements on mild steel and cast iron during periodic cathodic polarization at 20°C and 90°C. Corros. Sci. 1971, 11, 371-382.10.1016/S0010-938X(71)80120-8Search in Google Scholar