<abstract xml:lang="en" xmlns="http://www.w3.org/1999/xhtml"><p>An experimental study was conducted on High-Strength Flowable Mortar (HSFM) reinforced at different percentages of steel fiber (0, 0.25, 0.5, 0.75, 1.0, 1.25, 1.5, 1.75 and 2.0% as volumetric fractions) to determine the density, compressive strength, static modulus of elasticity and flexural strength. The load-deflection curves under a static flexural load were established, and the flexural toughness indices were obtained in accordance with ASTM C1018. The results indicate that by increasing the fiber content up to 1.75%, the flexural strength and toughness indices are increased. The density, compressive strength and static modulus of elasticity also increased using steel fiber.</p></abstract>

An experimental study was conducted on High-Strength Flowable Mortar (HSFM) reinforced at different percentages of steel fiber (0, 0.25, 0.5, 0.75, 1.0, 1.25, 1.5, 1.75 and 2.0% as volumetric fractions) to determine the density, compressive strength, static modulus of elasticity and flexural strength. The load-deflection curves under a static flexural load were established, and the flexural toughness indices were obtained in accordance with ASTM C1018. The results indicate that by increasing the fiber content up to 1.75%, the flexural strength and toughness indices are increased. The density, compressive strength and static modulus of elasticity also increased using steel fiber.

High-strength flowable mortar reinforced by steel fiber

School of Housing, Building & Planning, Universiti Sains Malaysia, 11800USM, Penang-Malaysia

Slovak Journal of Civil Engineering

{"article-title":"High-strength flowable mortar reinforced by steel fiber"}

An experimental study was conducted on High-Strength Flowable Mortar (HSFM) reinforced at different percentages of steel fiber (0, 0.25, 0.5, 0.75, 1.0, 1.25,...

High-strength flowable mortar reinforced by steel fiber

Online veröffentlicht: 12. Okt. 2011

Seitenbereich: 10 - 16

DOI: https://doi.org/10.2478/v10189-011-0013-0

Schlüsselwörter
Steel fiber, reinforcing material, high-strength mortar, flowable mortar

This content is open access.

High-strength flowable mortar reinforced by steel fiber

Online veröffentlicht: 12. Okt. 2011

Seitenbereich: 10 - 16

DOI: https://doi.org/10.2478/v10189-011-0013-0

SchlüsselwörterSteel fiber, reinforcing material, high-strength mortar, flowable mortar

This content is open access.

Schlüsselwörter
Steel fiber, reinforcing material, high-strength mortar, flowable mortar