<abstract xmlns="http://www.w3.org/1999/xhtml"> Composite materials have been developed in recent years. A new generation of structural composite materials for advanced aircraft is Fibre Metal Laminates (FML). They are hybrid composites consisting of alternating thin layers of metal sheets and fiber-reinforced composite material. FMLs have both low weight and good mechanical properties (high damage tolerance: fatigue and impact characteristics, corrosion and fire resistance).Quality control of materials and structures in aircraft is an important issue, also for Fibre Metal Laminates. For FML parts, a 100% non-destructive inspection for internal quality during the manufacturing process is required. In the case of FML composites, the most relevant defects that should be detected by non-destructive testing are porosity and delaminations.In this paper, a number of different non-destructive methods for the inspection of Fibre Metal Laminates were studied. The possibility of quality control of manufactured FML laminates - detection of defects as well as the procedures and processes are presented and discussed</abstract>

Composite materials have been developed in recent years. A new generation of structural composite materials for advanced aircraft is Fibre Metal Laminates (FML). They are hybrid composites consisting of alternating thin layers of metal sheets and fiber-reinforced composite material. FMLs have both low weight and good mechanical properties (high damage tolerance: fatigue and impact characteristics, corrosion and fire resistance).Quality control of materials and structures in aircraft is an important issue, also for Fibre Metal Laminates. For FML parts, a 100% non-destructive inspection for internal quality during the manufacturing process is required. In the case of FML composites, the most relevant defects that should be detected by non-destructive testing are porosity and delaminations.In this paper, a number of different non-destructive methods for the inspection of Fibre Metal Laminates were studied. The possibility of quality control of manufactured FML laminates - detection of defects as well as the procedures and processes are presented and discussed

Damage Detection and Size Quantification of FML with the Use of NDE

Air Force Institute of Technology, Warsaw, Poland

Lublin University of Technology, Lublin, Poland

Fatigue of Aircraft Structures

{"article-title":"Damage Detection and Size Quantification of FML with the Use of NDE"}

Composite materials have been developed in recent years. A new generation of structural composite materials for advanced aircraft is Fibre Metal Laminates...

Damage Detection and Size Quantification of FML with the Use of NDE

Online veröffentlicht: 30. Apr. 2013

Seitenbereich: 5 - 9

DOI: https://doi.org/10.2478/v10164-012-0051-8

This content is open access.