The Journal of Gdansk University of Technology

Advances in Materials Science

Advances Materials Science

Advances in Materials Sciences

<abstract xml:lang="en"><title style='display:none'>Properties of Surface Layers of Titanium Alloy TI6AL4V After Laser Melting Processes</title>The article presents the investigation results of titanium alloy Ti6Al4V surface layer after laser melting process. The process of laser melting was performed using Nd-YAG laser. The evaluation of structure of the alloy as well as hardness and chemical composition was performed. It was shown that laser melting changes the structure and properties of titanium alloy Ti6Al4V and process parameters as scanning speed affects the thickness of zones in top layer of the material. Due to the laser melting process more wear resistive surface can be obtained that increases the wear and corrosion resistance of orthopeadic prosthesis.</abstract>

Properties of Surface Layers of Titanium Alloy TI6AL4V After Laser Melting Processes

Faculty of Mechanical Engineering, Technical University of Gdansk, Narutowicza 11/12, 80-233 Gdansk, Poland

Keywords

<article-title>Properties of Surface Layers of Titanium Alloy TI6AL4V After Laser Melting Processes</article-title>

Advances in Materials Science is covered by the following services: <UL> <LI>Arianta </LI> <LI>Baidu Scholar </LI> <LI>BazTech </LI> <LI>Chemical Abstracts Service (CAS) - CAplus </LI> <LI>Chemical Abstracts Service (CAS) - SciFinder </LI> <LI>CNKI Scholar (China National Knowledge Infrastructure) </LI> <LI>CNPIEC - cnpLINKer </LI> <LI>Dimensions </LI> <LI>EBSCO </LI> <LI>Engineering Village </LI> <LI>ExLibris </LI> <LI>Google Scholar </LI> <LI>Inspec </LI> <LI>Japan Science and Technology Agency (JST) </LI> <LI>J-Gate </LI> <LI>JournalTOCs </LI> <LI>KESLI-NDSL (Korean National Discovery for Science Leaders) </LI> <LI>MyScienceWork </LI> <LI>Naver Academic </LI> <LI>Naviga (Softweco) </LI> <LI>Paperbase </LI> <LI>Polymer Library </LI> <LI>ProQuest </LI> <LI>QOAM (Quality Open Access Market) </LI> <LI>ReadCube </LI> <LI>SCILIT </LI> <LI>Semantic Scholar </LI> <LI>Sherpa/RoMEO </LI> <LI>TDNet </LI> <LI>TEMA Technik und Management </LI> <LI>Ulrich's Periodicals Directory/ulrichsweb </LI> <LI>WanFang Data </LI> <LI>Web of Science - Emerging Sources Citation Index </LI> <LI>WorldCat (OCLC) </LI> <LI>X-MOL </LI></UL>

Advances in Materials Science ist in den folgenden Services indiziert: <UL> <LI>Arianta </LI> <LI>Baidu Scholar </LI> <LI>BazTech </LI> <LI>Chemical Abstracts Service (CAS) - CAplus </LI> <LI>Chemical Abstracts Service (CAS) - SciFinder </LI> <LI>CNKI Scholar (China National Knowledge Infrastructure) </LI> <LI>CNPIEC - cnpLINKer </LI> <LI>Dimensions </LI> <LI>EBSCO </LI> <LI>Engineering Village </LI> <LI>ExLibris </LI> <LI>Google Scholar </LI> <LI>Inspec </LI> <LI>Japan Science and Technology Agency (JST) </LI> <LI>J-Gate </LI> <LI>JournalTOCs </LI> <LI>KESLI-NDSL (Korean National Discovery for Science Leaders) </LI> <LI>MyScienceWork </LI> <LI>Naver Academic </LI> <LI>Naviga (Softweco) </LI> <LI>Paperbase </LI> <LI>Polymer Library </LI> <LI>ProQuest </LI> <LI>QOAM (Quality Open Access Market) </LI> <LI>ReadCube </LI> <LI>SCILIT </LI> <LI>Semantic Scholar </LI> <LI>Sherpa/RoMEO </LI> <LI>TDNet </LI> <LI>TEMA Technik und Management </LI> <LI>Ulrich's Periodicals Directory/ulrichsweb </LI> <LI>WanFang Data </LI> <LI>Web of Science - Emerging Sources Citation Index </LI> <LI>WorldCat (OCLC) </LI> <LI>X-MOL </LI></UL>

The journal is primarily focused on structure-properties relationship of engineering materials. Research articles addressing the following issues can be published as unique contributions across a variety of topics, including, but not limited to: <UL> <LI>Structural and functional materials (metals and alloys, ceramics, polymers, composites) </LI> <LI>Nanomaterials </LI> <LI>Biomaterials </LI> <LI>Materials for electronics </LI> <LI>Materials for marine industry </LI> <LI>Materials for energy industry </LI> <LI>Materials for buildings </LI> <LI>Surfaces, interfaces and thin films </LI> <LI>Design, synthesis, processing and characterization techniques </LI> <LI>Manufacturing of materials </LI> <LI>Mechanics of materials </LI> <LI>Stress analysis </LI> <LI>Modeling of properties of materials </LI> <LI>Methodology of testing the structure and properties of materials </LI></UL> The journal publishes original research articles and review articles. The possibility of publishing review articles should be agreed with the editors of the journal prior to submission. Why subscribe and read <UL> <LI>Internationally recognized source of up-to-date materials science information showing the newest achievements in area of structural and functional materials. </LI></UL> Why submit <UL> <LI>A quick, reliable and constructive review </LI> <LI>Short publication time </LI> <LI>High quality electronic publication technologies </LI> <LI>Open access </LI></UL> Rejection Rate <UL> <LI>About 50% </LI></UL> Archiving Sciendo archives the contents of this journal in <A href="https://www.portico.org/">Portico</A> - digital long-term preservation service of scholarly books, journals and collections. Plagiarism Policy The editorial board is participating in a growing community of <A href="https://www.crossref.org/services/similarity-check/">Similarity Check System's</A> users in order to ensure that the content published is original and trustworthy. Similarity Check is a medium that allows for comprehensive manuscripts screening, aimed to eliminate plagiarism and provide a high standard and quality peer-review process.

EDITORIAL STAFF Editor-in-Chief Prof. Jerzy Łabanowski, Gdansk University of Technology, Poland Deputy Editor-in-Chief Prof. Dariusz Fydrych, Gdansk University of Technology, Poland Associate Editors Dr. Aleksandra Świerczyńska, Gdansk University of Technology, Poland Dr. Michał Landowski, Gdansk University of Technology, Poland Dr. Krzysztof Krzysztofowicz, Gdansk University of Technology, Poland Dr. Sachin Sirohi, SRM Institute of Science and Technology, India Prof. Jacek Tomków, Gdansk University of Technology, Poland Language Editor Maciej Zaręba, Gdansk University of Technology, Poland INTERNATIONAL ADVISORY BOARD Prof. Ricardo Branco, University of Coimbra, Portugal Dr. Theresa Coetsee, University of Pretoria, RSA Prof. Tomasz Chmielewski, Warsaw University of Technology, Warsaw, Poland Prof. Janusz Ćwiek, Silesian University of Technology, Katowice, Poland Prof. Milos Djukic, University of Belgrade, Serbia Prof. Antonio Gil, Universidad Pública de Navarra, Spain Prof. Grzegorz Golański, Czestochowa University of Technology, Poland Dr. Thomas Hassel, Leibniz Universität Hannover, Germany Prof. Ayesha Kausar, National Center for Physics, Islamabad, Pakistan Prof. Mourad Keddam, University of Science and Technology Houari Boumediene, Algeria Prof. Halina Krawiec, AGH University of Science and Technology, Kraków, Poland Prof. Andrzej Kubit, Rzeszów University of Technology, Poland Prof. Leszek Łatka, Wrocław University of Technology, Poland Prof. Michel Mesnard, Université de Bordeaux, France Prof. Jean Marc Olive, Universite de Bordeaux, France Dr. Chandan Pandey, Indian Institute of Technology Jodhpur, India Prof. Krzysztof Rokosz, Koszalin University of Technology, Poland Prof. Elena Scutelnicu, University of Galati, Romania Prof. Maria Sozańska, Silesian University of Technology, Katowice, Poland Prof. Tomasz Trzepieciński, Rzeszów University of Technology, Poland Dr. Balazs Varbai, Budapest University of Technology and Economics, Hungary Prof. Mariusz Walczak, Lublin University of Technology, Poland Dr. Jianfeng Wang, Nanjing University of Aeronautics and Astronautics, China PUBLISHER De Gruyter Poland Bogumila Zuga 32A Str. 01-811 Warsaw, Poland T: +48 22 701 50 15

<DIV align=left> Please submit your manuscripts to Advances in Materials Science via Editorial Manager: <A href="http://www.editorialmanager.com/ams/">www.editorialmanager.com/ams/</A> Open Access Statement The journal is an Open Access journal that allows a free unlimited access to all its contents without any restrictions upon publication to all users. <A href="https://sciendo-parsed-data-feed.s3.eu-central-1.amazonaws.com/ADMS/Open_Access_License.pdf">Open Access License</A> </DIV>

Advances in Materials Science

Properties of Surface Layers of Titanium Alloy TI6AL4V After Laser Melting Processes

A. Ossowska,
A. Ossowska,
A. Zieliński und
A. Zieliński und
M. Buczek
M. Buczek

Online veröffentlicht: 28 Jan 2011

Volumen & Heft: Volumen 10 (2010) - Heft 4 (December 2010)

Seitenbereich: 63 - 68

Details zu Zeitschrift und Ausgabe

Advances in Materials Science

PDF-Vorschau

Referenzen

Neueste Artikel

Advances in Materials Science

Properties of Surface Layers of Titanium Alloy TI6AL4V After Laser Melting Processes

A. Ossowska,A. Ossowska,A. Zieliński undA. Zieliński undM. BuczekM. Buczek

Online veröffentlicht: 28 Jan 2011

Volumen & Heft: Volumen 10 (2010) - Heft 4 (December 2010)

Seitenbereich: 63 - 68

Details zu Zeitschrift und Ausgabe

Advances in Materials Science

PDF-Vorschau

Referenzen

Neueste Artikel

A. Ossowska,
A. Ossowska,
A. Zieliński und
A. Zieliński und
M. Buczek
M. Buczek