1. bookVolumen 8 (2008): Heft 3 (September 2008)
Zeitschriftendaten
License
Format
Zeitschrift
eISSN
2083-4799
ISSN
1730-2439
Erstveröffentlichung
23 Sep 2008
Erscheinungsweise
4 Hefte pro Jahr
Sprachen
Englisch
Uneingeschränkter Zugang

Underwater Welding - A Review

Online veröffentlicht: 20 Jan 2009
Volumen & Heft: Volumen 8 (2008) - Heft 3 (September 2008)
Seitenbereich: 11 - 22
Zeitschriftendaten
License
Format
Zeitschrift
eISSN
2083-4799
ISSN
1730-2439
Erstveröffentlichung
23 Sep 2008
Erscheinungsweise
4 Hefte pro Jahr
Sprachen
Englisch

Lesiński K. J.: State of the art of underwater cutting and welding. Proceedings of conference "Problems of underwater cutting and welding", Gdańsk University of Technology, Gdańsk 1985 (in Polish).Search in Google Scholar

Lesiński K. J., Piątkowski T., Kiełczyński W.: Evaluation of quality of welds obtained by underwater welding - stage I. Report. Gdańsk University of Technology, Gdańsk 1989 (in Polish).Search in Google Scholar

Lesiński K. J.: Semiautomatic underwater cutting. Proceedings of conference "Problems of underwater cutting and welding", Gdańsk University of Technology, Gdańsk 1985 (in Polish).Search in Google Scholar

Cotton H. C.: Welding under water and in the splash zone - a review. Proceedings of the International Conference "Underwater Welding", Trondheim, Norway 1983.10.1016/B978-0-08-030537-0.50006-5Search in Google Scholar

Grubbs C. E., Reynolds T. J.: Underwater welding: seeking high quality at greater depths. Welding Journal 9/1998.Search in Google Scholar

Kononenko V. Ya.: Technologies of underwater wet welding and cutting. E. O. Paton Electric Welding Institute, Kiev, Ukraine 2000.Search in Google Scholar

Szelagowski P., Pachniuk I.: State of the art and practice of underwater hyperbaric dry welding. International workshop on underwater welding of marine structures. New Orleans, USA, 1994.Search in Google Scholar

Christensen N.: The metallurgy of underwater welding. Proceedings of the International Conference "Underwater Welding", Trondheim, Norway 1983.10.1016/B978-0-08-030537-0.50008-9Search in Google Scholar

Grubbs C. E., Reynolds T. J.: State-of-the-art underwater wet welding - offshore oil fields. World Oil 8/1998.Search in Google Scholar

Ibarra S., Grubbs C. E., Liu S.: State of the art and practice of underwater wet welding of steel. International workshop on underwater welding of marine structures. New Orleans, USA, 1994.Search in Google Scholar

Chigariev V. V., Ustinov A. V.: Design-experimental estimation of the possibility of reduction of the HAZ metal cooling rate in wet underwater welding. The Paton Welding Journal 5/2000.Search in Google Scholar

Liu S., Pope A., Daemen R.: Welding consumables and weldability. International workshop on underwater welding of marine structures. New Orleans, USA, 1994.Search in Google Scholar

Pessoa E., Bracarense A., Zica E., Liu S., Guerrero F.: Porosity variation along multipass underwater wet welds and its influence on mechanical properties. Journal of Materials Processing Technology 179/2006.10.1016/j.jmatprotec.2006.03.071Search in Google Scholar

Rowe M., Liu S., Reynolds T. J.: The effect of ferro-alloy additions and depth on the quality of underwater wet welds. Welding Journal 08/2002.Search in Google Scholar

Rowe M., Liu S.: Final report MT-CWJCR-099-032. Global Industries, 1999.Search in Google Scholar

www.specialwels.comSearch in Google Scholar

www.pommec.comSearch in Google Scholar

Fydrych D.: Effect of welding conditions on susceptibility to cold cracking of welds obtained under water. Ph. D. thesis. Gdańsk University of Technology, Gdańsk 2005 (in Polish).Search in Google Scholar

Łabanowski J., Fydrych D.: Investigations of underwater welding processes. Report, Gdańsk University of Technology, Gdańsk 2008.10.2478/v10077-008-0040-3Search in Google Scholar

Rogalski G.: Determination of welding thermal cycles during underwater welding. Proceedings of Doctorate Studies Conference, Gdańsk 2003 (in Polish).Search in Google Scholar

Lesiński K. J.: Technology of welding by local cavity process up to 200 m - stage I. Report. Gdańsk University of Technology, Gdańsk 1987.Search in Google Scholar

Lesiński K. J.: Technology of welding by local cavity process up to 200 m - stage II. Report. Gdańsk University of Technology, Gdańsk 1987.Search in Google Scholar

Zhang X., Ashida E., Shono S., Matsuda F.: Effect of shielding conditions of local dry cavity on weld quality in underwater Nd:YAG laser welding. Journal of Materials Processing Technology 174/2006.10.1016/j.jmatprotec.2004.12.009Search in Google Scholar

Gooch T. G.: Properties of underwater welds. Met. Con. 1983, ‘Part 1 Procedural trials’ 15(3) 164-167; ‘Part 2 Mechanical properties’ 15(4) 206-215.Search in Google Scholar

Ibarra S.: Shallow underwater welding. International workshop on quality in underwater welding of marine structures. Golden, USA, 1985.Search in Google Scholar

Johnsen M. R.: Keeping shipshape through underwater welding. Welding Journal 11/2001.Search in Google Scholar

Bohme D., Eisenbeis C.: Investigation into the credibility of the implant test when used to asses the cold cracking sensitivity of underwater wet welds. Proceedings of the International Conference "Welding Under Extreme Conditions", Helsinki, Finland 1989.Search in Google Scholar

Brink S. H., Boltje G. W.: Cold cracking susceptibility of welds obtained by wet underwater welding. Proceedings of the International Conference "Underwater Welding", Trondheim, Norway 1983.10.1016/B978-0-08-030537-0.50029-6Search in Google Scholar

Fydrych D., Kozak T.: Effect of welding conditions on susceptibility to cold cracking of underwater welded joints. Proceedings of International Conference, Bremen 2006.Search in Google Scholar

Tasak E., Bal M.: Properties of wet welds obtained by covered electrodes. Przegląd Spawalnictwa1-2/1985.Search in Google Scholar

Matsuda K., Masumoto I., Hasegawa M.: Study on the crack sensitivity of mild steel welded joint by underwater welding. Proceedings of the International Conference "Joining of Metals - 2", Helsingor, Denmark 1984.Search in Google Scholar

Ozaki H., Naiman J., Masubuchi K.: A study of hydrogen cracking in underwater steel welds. "Welding Journal" 8/1977.10.1109/OCEANS.1978.1151168Search in Google Scholar

Bailey N.: Weldability of ferritic steels. Abington Publishing, Abington Hall, Cambridge, England 1994.10.1533/9781845698935Search in Google Scholar

Butnicki S.: Weldability and brittleness of steel. Wydawnictwa Naukowo-Techniczne, Warszawa 1991 (in Polish).Search in Google Scholar

IIW Doc. IX-1970-00 Pokhodnya I. K., Shvachko V. I.: Physical nature of hydrogen-induced cold cracks in welded joints in structural steels.Search in Google Scholar

Fydrych D., Rogalski G.: Effect of shielded-electrode wet welding conditions on hydrogen content in deposited metal. Przegląd Spawalnictwa 2/2008.Search in Google Scholar

Kozak T., Fydrych D.: Weldability of constructional materials. Report BW 01469303, Gdańsk University of Technology, Gdańsk 2004.Search in Google Scholar

Kotecki D. J.: Hydrogen reconsidered. Welding Journal 8/1992.Search in Google Scholar

Fydrych D., Rogalski G.: Investigations of underwater welding processes. Report BW, Gdańsk University of Technology, Gdańsk 2007.Search in Google Scholar

AWS D3.6M: 1999: Specification for underwater welding, American Welding Society, Miami, USA 1999.Search in Google Scholar

Empfohlene Artikel von Trend MD

Planen Sie Ihre Fernkonferenz mit Scienceendo