[Sun, L. (2008). Analysis and improvement on the structure of variable reluctance resolver. IEEE Trans. Magn., 44 (8), 2002-2008.]Search in Google Scholar
[Benammar, M., Ben-brahim, L., Alhamadi, M. A. (2005). A high precision resolver-to-dc converter. IEEE Trans. Instrum. Meas., 54 (6), 2289-2296.10.1109/TIM.2005.858135]Search in Google Scholar
[Benammar, M., Ben-brahim L., Alhamadi, M. A., Al-Naemi, M. (2008). A novel method for estimating the angle from analog co-sinusoidal quadrature signals. Sensor. Actuator. A - Phys., 142 (1), 225-231.10.1016/j.sna.2007.02.025]Search in Google Scholar
[Hanselman, D. C., Thibodeau, R. E., Smith, D. J. (1989). Variable-reluctance resolver design guidelines. In Industrial Electronics Society Conference (IECON '89), 6-10 November 1989. IEEE, Vol. 1, 203-208.]Search in Google Scholar
[Li, X., Wu, Q., Nandi, S. (2007). Performance analysis of a three-phase induction machine with inclined static eccentricity. IEEE Trans. Ind. Appl., 43 (2), 531-541.10.1109/TIA.2006.889806]Search in Google Scholar
[Dorrell, D. G., Thomson, W. T., Roach, S. (1997). Analysis of air-gap flux, current, vibration signals as a function of the combination of static and dynamic air-gap eccentricity in 3-phase induction motors. IEEE Trans. Ind. Appl., 33 (1), 24-34.10.1109/28.567073]Search in Google Scholar
[Masaki, K., Kitazawa, K., Mimura, H., Nirei, M., Tsuchimichi, K., Wakiwaka, H., Yamada, H. (2000). Magnetic field analysis of a resolver with a skewed and eccentric rotor. Sensor. Actuator. A - Phys., 81 (1-3), 297-300.10.1016/S0924-4247(99)00179-X]Search in Google Scholar
[Hanselman, D. C. (1991). Techniques for improving resolver-to-digital conversion accuracy. IEEE Trans. Ind. Electron., 38 (6), 501-504.10.1109/41.107116]Search in Google Scholar
[Masaki, K., Kitazawa, K., Mimura, H., Tsuchimichi, K., Wakiwaka, H., Yamada, H. (1998). Consideration on the angular error due to the shaft eccentricity and the compensation effect by short-circuit winding on a resolver. J. Magn. Soc. Jpn., 22 (4-2), 701-704.10.3379/jmsjmag.22.701]Search in Google Scholar
[Alhamadi, M., Benammar, M., Ben-brahim, L. (2004). Precise method for linearizing sine and cosine signals in resolvers and quadrature encoder applications. In Industrial Electronics Society: 30th Annual Conference of IEEE (IECON 2004), 2-6 November 2004. IEEE, Vol. 2, 1935-1940.]Search in Google Scholar
[Bünt, A., Beinek, S. (2004). High-performance speed measurement by suppression of systematic resolver and encoder errors. IEEE Trans. Ind. Electron., 51 (1), 49-53.10.1109/TIE.2003.822084]Search in Google Scholar
[Yim, C. H., Ha, I. J., Ko, M. S. (1992). A resolver-to-digital conversion method for fast tracking. IEEE Trans. Ind. Electron., 39, 369-378.10.1109/41.161468]Search in Google Scholar
[Kaul, S. K., Koul, R., Bhat, C. L., Kaul, I. K., Tickoo, A. K. (1997). Use of a ‘look-up’ table improves the accuracy of a low-cost resolver-based absolute shaft encoder. Meas. Sci. Technol., 8, 329-331.10.1088/0957-0233/8/3/016]Search in Google Scholar
[Jiuqing, W., Xingshan, L., Hong, G. (2001). The analysis and design of high-speed brushless resolver plus R/D converter shaft-angle measurement system. In Electrical Machines and Systems: Fifth International Conference (ICEMS 2001), 18-20 August 2001. IEEE, Vol. 1, 289-292.]Search in Google Scholar
[Khaburi, D. A., Tootoonchian, F., Nasiri-Gheidari, Z. (2007). Parameter identification of a brushless resolver using charge response of stator current. Iranian Journal of Electrical & Electronic Engineering, 3 (1&2), 42-52.]Search in Google Scholar
[Ong, C. M. (1998). Dynamic Simulation of Electric Machinery Using Matlab/Simulink (1st ed.). Prentice Hall, ISBN 0-13-723785-5.]Search in Google Scholar
[Khaburi, D. A., Tootoonchian, F., Nasiri-Gheidari, Z. (2008). Dynamic performance prediction of brushless resolver. Iranian Journal of Electrical & Electronic Engineering, 4 (3), 94-103.]Search in Google Scholar