<abstract xmlns="http://www.w3.org/1999/xhtml"><p><italic>A hybrid craft is defined as a combination of different lifting surfaces. The lift force can be of aerodynamic</italic><italic>or hydrodynamic character. This research deals with the conditions of using planing mono-hulls equipped</italic><italic>with a couple of wings, called planing-wing hybrid craft. A parametric study is conducted by using Vortex</italic><italic>Lattice Method to determine feasibility of using an aerodynamic wing mounted to planing craft. It has</italic><italic>been determined that the wing area should be more than twice as much as the wetted surface of the craft,</italic><italic>to get an effective wing for planing craft. Furthermore, the wing should be so designed as to obtain its</italic><italic>high aspect ratio. Maximum lift force contribution resulting from different wing configurations considered</italic><italic>in this study is less than 35 percent of the total hydrodynamic lift force at an arbitrary condition. On this</italic><italic>basis it may be concluded that the wing may be effectively used only in special conditions, hence this is</italic><italic>not recommended for general application.</italic></p></abstract>

A hybrid craft is defined as a combination of different lifting surfaces. The lift force can be of aerodynamicor hydrodynamic character. This research deals with the conditions of using planing mono-hulls equippedwith a couple of wings, called planing-wing hybrid craft. A parametric study is conducted by using VortexLattice Method to determine feasibility of using an aerodynamic wing mounted to planing craft. It hasbeen determined that the wing area should be more than twice as much as the wetted surface of the craft,to get an effective wing for planing craft. Furthermore, the wing should be so designed as to obtain itshigh aspect ratio. Maximum lift force contribution resulting from different wing configurations consideredin this study is less than 35 percent of the total hydrodynamic lift force at an arbitrary condition. On thisbasis it may be concluded that the wing may be effectively used only in special conditions, hence this isnot recommended for general application.

A study on performance of planing-wing hybrid craft

Amirkabir University of Technology, Tehran, Iran

Polish Maritime Research

{"article-title":"A study on performance of planing-wing hybrid craft"}

A hybrid craft is defined as a combination of different lifting surfaces. The lift force can be of aerodynamicor hydrodynamic character. This research deals...

A study on performance of planing-wing hybrid craft

Online veröffentlicht: 26. Jan. 2013

Seitenbereich: 16 - 22

DOI: https://doi.org/10.2478/v10012-012-0036-0

Schlüsselwörter
hydrodynamics, ground effect, wing, planing, aerodynamics, VLM

This content is open access.

A study on performance of planing-wing hybrid craft

Online veröffentlicht: 26. Jan. 2013

Seitenbereich: 16 - 22

DOI: https://doi.org/10.2478/v10012-012-0036-0

Schlüsselwörterhydrodynamics, ground effect, wing, planing, aerodynamics, VLM

This content is open access.

Schlüsselwörter
hydrodynamics, ground effect, wing, planing, aerodynamics, VLM