<abstract xml:lang="en" xmlns="http://www.w3.org/1999/xhtml"><p>Mechanisms of fault tolerance to actuator faults in a control structure with a predictive constrained set-point optimizer are proposed. The structure considered consists of a basic feedback control layer and a local supervisory set-point optimizer which executes as frequently as the feedback controllers do with the aim to recalculate the set-points both for constraint feasibility and economic performance. The main goal of the presented reconfiguration mechanisms activated in response to an actuator blockade is to continue the operation of the control system with the fault, until it is fixed. This may be even long-term, if additional manipulated variables are available. The mechanisms are relatively simple and consist in the reconfiguration of the model structure and the introduction of appropriate constraints into the optimization problem of the optimizer, thus not affecting the numerical effectiveness. Simulation results of the presented control system for a multivariable plant are provided, illustrating the efficiency of the proposed approach.</p></abstract>

Mechanisms of fault tolerance to actuator faults in a control structure with a predictive constrained set-point optimizer are proposed. The structure considered consists of a basic feedback control layer and a local supervisory set-point optimizer which executes as frequently as the feedback controllers do with the aim to recalculate the set-points both for constraint feasibility and economic performance. The main goal of the presented reconfiguration mechanisms activated in response to an actuator blockade is to continue the operation of the control system with the fault, until it is fixed. This may be even long-term, if additional manipulated variables are available. The mechanisms are relatively simple and consist in the reconfiguration of the model structure and the introduction of appropriate constraints into the optimization problem of the optimizer, thus not affecting the numerical effectiveness. Simulation results of the presented control system for a multivariable plant are provided, illustrating the efficiency of the proposed approach.

Actuator Fault Tolerance in Control Systems with Predictive Constrained Set-Point Optimizers

Institute of Control and Computation Engineering, Warsaw University of Technology, ul. Nowowiejska 15/19, 00-665 Warsaw, Poland

International Journal of Applied Mathematics and Computer Science

Mechanisms of fault tolerance to actuator faults in a control structure with a predictive constrained set-point optimizer are proposed. The structure...

Actuator Fault Tolerance in Control Systems with Predictive Constrained Set-Point Optimizers

Online veröffentlicht: 30. Dez. 2008

Seitenbereich: 539 - 552

DOI: https://doi.org/10.2478/v10006-008-0047-2

Schlüsselwörter
fault-tolerant control, model predictive control, set-point optimization, nonlinear systems

This content is open access.

Actuator Fault Tolerance in Control Systems with Predictive Constrained Set-Point Optimizers

Online veröffentlicht: 30. Dez. 2008

Seitenbereich: 539 - 552

DOI: https://doi.org/10.2478/v10006-008-0047-2

Schlüsselwörterfault-tolerant control, model predictive control, set-point optimization, nonlinear systems

This content is open access.

Schlüsselwörter
fault-tolerant control, model predictive control, set-point optimization, nonlinear systems