<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The article presents assumptions of the one-dimensional model of the ASz-62IR aircraft engine. This model was developed in the AVL BOOST software. The ASz-62IR is a nine cylinder, aircraft engine in a radial configuration. It is produced by the Polish company WSK “PZL-Kalisz” S. A. The model is used for calculating parameters of the fuel stream and the air stream in intake system of the engine, as well as for the analyses of the combustion process and the exhaust flow to the external environment. The model is based on the equations describing the isentropic flow. The geometry of the channels and all parts of the model has been mapped on the basis of empirical measurements of the engine elements. The model assumes indirect injection where the gasoline was used as a fuel with the calorific value of 43.5 MJ/kg. The model assumes a mixture of a stoichiometric ratio of 14.5. This model is only part of the overall the ASz-62IR engine model. After the simulation tests on the full model the obtained results confirmed the correctness of the model used to create the mixture. It was found that the AVL BOOST software is good for the implementation of this type of work.</p>
</abstract>

The article presents assumptions of the one-dimensional model of the ASz-62IR aircraft engine. This model was developed in the AVL BOOST software. The ASz-62IR is a nine cylinder, aircraft engine in a radial configuration. It is produced by the Polish company WSK “PZL-Kalisz” S. A. The model is used for calculating parameters of the fuel stream and the air stream in intake system of the engine, as well as for the analyses of the combustion process and the exhaust flow to the external environment. The model is based on the equations describing the isentropic flow. The geometry of the channels and all parts of the model has been mapped on the basis of empirical measurements of the engine elements. The model assumes indirect injection where the gasoline was used as a fuel with the calorific value of 43.5 MJ/kg. The model assumes a mixture of a stoichiometric ratio of 14.5. This model is only part of the overall the ASz-62IR engine model. After the simulation tests on the full model the obtained results confirmed the correctness of the model used to create the mixture. It was found that the AVL BOOST software is good for the implementation of this type of work.

Thermodynamic Model of the ASZ-62IR Radial Aircraft Engine

Department of Thermodynamics, Fluid Mechanics and Aviation Propulsion Systems

Faculty of Mechanical Engineering, Lublin University of Technology

Transactions on Aerospace Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Thermodynamic Model of the ASZ-62IR Radial Aircraft Engine"}

The article presents assumptions of the one-dimensional model of the ASz-62IR aircraft engine. This model was developed in the AVL BOOST software. The ASz-62IR...

Thermodynamic Model of the ASZ-62IR Radial Aircraft Engine

Online veröffentlicht: 25. Juli 2019

Seitenbereich: 36 - 48

DOI: https://doi.org/10.2478/tar-2018-0004

Schlüsselwörter
aviation propulsion, AVL BOOST, engine model, charge exchange, mixture formation

© 2017 Copyright by Lukasiewicz Research Network – Institute of Aviation

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Thermodynamic Model of the ASZ-62IR Radial Aircraft Engine

Online veröffentlicht: 25. Juli 2019

Seitenbereich: 36 - 48

DOI: https://doi.org/10.2478/tar-2018-0004

Schlüsselwörteraviation propulsion, AVL BOOST, engine model, charge exchange, mixture formation

© 2017 Copyright by Lukasiewicz Research Network – Institute of Aviation

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
aviation propulsion, AVL BOOST, engine model, charge exchange, mixture formation