<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The paper presents the manufacturing technology and quality control of samples made of composite materials intended, inter alia, for aircraft elements. The samples are made from carbon fiber reinforced prepreg in a polymer matrix which is commonly used in the aerospace industry. The authors described the dimensional requirements for samples made of composite materials for strength testing, and the main stages of production which have a direct impact on the quality of composite samples. Also presented is the technological process of producing flat carbon composite panels for composite samples, cutting the produced panels with a CNC plotter, cutting the samples on a conventional milling machine, and surface treatment of the samples on a surface grinder. The machining parameters that were experientially found to be optimal for the milling and grinding of carbon samples are specified as well. Finally, the method of quality control of the ready composite samples is described and solutions are presented to improve the production of high-quality samples.</p>
</abstract>

The paper presents the manufacturing technology and quality control of samples made of composite materials intended, inter alia, for aircraft elements. The samples are made from carbon fiber reinforced prepreg in a polymer matrix which is commonly used in the aerospace industry. The authors described the dimensional requirements for samples made of composite materials for strength testing, and the main stages of production which have a direct impact on the quality of composite samples. Also presented is the technological process of producing flat carbon composite panels for composite samples, cutting the produced panels with a CNC plotter, cutting the samples on a conventional milling machine, and surface treatment of the samples on a surface grinder. The machining parameters that were experientially found to be optimal for the milling and grinding of carbon samples are specified as well. Finally, the method of quality control of the ready composite samples is described and solutions are presented to improve the production of high-quality samples.

Manufacturing and Testing of Carbon Composite Samples Intended for Aviation

Composite Technology Center, Institute of Aviation

Transactions on Aerospace Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Manufacturing and Testing of Carbon Composite Samples Intended for Aviation"}

The paper presents the manufacturing technology and quality control of samples made of composite materials intended, inter alia, for aircraft elements. The...

Manufacturing and Testing of Carbon Composite Samples Intended for Aviation

Online veröffentlicht: 31. Mai 2019

Seitenbereich: 107 - 116

DOI: https://doi.org/10.2478/tar-2017-0024

Schlüsselwörter
carbon prepregs, composite technology, vacuum consolidation, strength testing

© 2017 Copyright by Lukasiewicz Research Network – Institute of Aviation

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Manufacturing and Testing of Carbon Composite Samples Intended for Aviation

Online veröffentlicht: 31. Mai 2019

Seitenbereich: 107 - 116

DOI: https://doi.org/10.2478/tar-2017-0024

Schlüsselwörtercarbon prepregs, composite technology, vacuum consolidation, strength testing

© 2017 Copyright by Lukasiewicz Research Network – Institute of Aviation

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
carbon prepregs, composite technology, vacuum consolidation, strength testing