On the Assessment of Actual Compressive Strength of Concrete in Reinforced Columns: Influence of Core Diameter and Slenderness Ratio

[1] Kumpyak, O.G., Galyautdinov, Z.R., & Kokorin, D.N. (2016). Strength of concrete structures under dynamic loading., vol. 070006, no. 2016, doi: 10.1063/1.4937876. Search in Google Scholar

[2] Fedorova, N.V., Medyankin, M., & Fedorov, S.S. (2021). Strength of heavy concrete during static-dynamic deformation. IOP Conference Series: Materials Science and Engineering, 1030. doi: 10.1088/1757-899X/1030/1/012046. Search in Google Scholar

[3] Mailyan, L.R., Beskopylny, A.N., Meskhi, B., Shilov, A.V., Stel’makh, S.A., Shcherban’, E.M., Smolyanichenko, A.S., & El’shaeva, D. (2021). Improving the Structural Characteristics of Heavy Concrete by Combined Disperse Reinforcement. Applied Sciences. Search in Google Scholar

[4] Swamy, R. (2008). Sustainable Concrete for the 21st Century Concept of Strength through Durability. R Narayan Swamy University of Sheffield, England,” Japan Soc. Civ. Eng. Concr. Comm. Newsl., 2008, [Online]. Available: http://eprints.whiterose.ac.uk/4617/. Search in Google Scholar

[5] Pucinotti, R., & Tripodo, M. (2009). The Fiumarella bridge: concrete characterisation and deterioration assessment by nondestructive testing. International Journal of Microstructure and Materials Properties, 4, 128-139., doi: 10.1504/IJMMP.2009.028438. Search in Google Scholar

[6] Stefano, M.D., Tanganelli, M., & Viti, S. (2013). On the variability of concrete strength as a source of irregularity in elevation for existing RC buildings: a case study. Bulletin of Earthquake Engineering, 11, 1711-1726. doi: 10.1007/s10518-013-9463-2. Search in Google Scholar

[7] Bartlett FM and MacGregor JG. Effect of core diameter on concrete core strengths. ACI Materials Journal. 1994, 91(4), pp 339-348. Search in Google Scholar

[8] ASTM 900-06, “Standard test method for pullout strenght of hardened concrete,” Am. Soc. Test. Mater., no. July 1999, pp. 1–10, 2013. Search in Google Scholar

[9] Bickley, J. A. (1981). Pullout Testing of Concrete. Concr. Constr. - World Concr., vol. 26, no. 7. Search in Google Scholar

[10] Breysse, D. et al., (2019). Recommendation of RILEM TC249-ISC on non destructive in situ strength assessment of concrete. Mater. Struct. Constr., vol. 52, no. 4, pp. 1–21, doi: 10.1617/s11527-019-1369-2. Search in Google Scholar

[11] Yan, J., Liu, K., Zou, C., Mo, Y., & Ou, J. (2020). Comparison of Evaluation Tests for Compressive Strength of Structural Concrete. Period. Polytech. Civ. Eng., vol. 64, no. 2, pp. 387–395, 2020, doi: 10.3311/PPci.12545. Search in Google Scholar

[12] Qasrawi, H. (2019). Effect of the position of core on the strength of concrete of columns in existing structures, Journal of Building Engineering, vol. 25, 100812, 2019, https://doi.org/10.1016/j.jobe.2019.100812 Search in Google Scholar

[13] NF EN 13791 Standard, “Assessment of in-situ compressive strength in structures and precast concrete components,” August, 2019. Search in Google Scholar

[14] Khoury, S.S., Aliabdo, A.A., & Ghazy, A. (2014). Reliability of core test – Critical assessment and proposed new approach. alexandria engineering journal, 53, 169-184., doi: 10.1016/j.aej.2013.12.005. Search in Google Scholar

[15] Masi, A. & Vona, M. (2009). Estimation of the in-situ concrete strength: provisions of the european and italian seismic codes and possible improvements, RELUIS - Eurocode 8 Perspect. from Ital. Standpoint Work., no. May 2014, pp. 67–77, 2009. Search in Google Scholar

[16] ACI 214.4R-10, “Guide for Obtaining Cores and Interpreting Compressive Strength Results” American Concrete Institute 38800 Country Club Drive Farmington Hills, MI 48331 U.S.A. 2010. Search in Google Scholar

[17] Carroll, A.C., Grubbs, A.R., Schindler, A.K., & Barnes, R.W. (2016). Effect of core geometry and size on concrete compressive strength. (Research Report No. 1 for ALDOT Project 930-828),” no. 1, pp. 1–136. Search in Google Scholar

[18] Suprenant, B. A. (1995). Core Strength Variation of in-Place Concrete. The Aberdeen Group; Boston, MA, USA. Search in Google Scholar

[19] Bartlett, F.M., & Macgregor, J.G. (1999). Variation of In-Place Concrete Strength in Structures. ACI Materials Journal. vol. 96, Issue 2, pp 261-270, 1999. Search in Google Scholar

[20] de Stefano, M., Tanganelli, M., & Viti, S. (2013). Effect of the variability in plan of concrete mechanical properties on the seismic response of existing RC framed structures. Bulletin of Earthquake Engineering, 11, 1049-1060. doi: 10.1007/s10518-012-9412-5. Search in Google Scholar

[21] NF EN 12390-2 Standard, “Testing hardened concrete-Part 2 : making and curing specimens for strength tests,” June, 2019. Search in Google Scholar

[22] NF EN 12390-3, “Testing hardened concrete - Part 3 : compressive strength for test specimens,” June, 2019. Search in Google Scholar

[23] NF EN 12504-4 Standard, “Testing concrete in structures- Part 4 : Determination of ultrasonic velocity” July, 2021. Search in Google Scholar

[24] NA 17004, norme algérienne“ Evaluation de la résistance à la compression sur site des structures et les éléments préfabriqués en béton,” 2008. Search in Google Scholar

[25] NF EN 13791 Standard, “Assessment of in-situ compressive strength in structures and precast concrete components,” September, 2007. Search in Google Scholar

[26] Benidir, A. (2018).Aggregate size and lateral dimension effects on core compressive strength of concrete, Proc. IRF2018 6th Int. Conf. Integrity-Reliability-Failure, no. July, pp. 479–486, 2018. Search in Google Scholar

[27] Kou, S., Poon, C.S., & Wan, H. (2012). Properties of concrete prepared with low-grade recycled aggregates. Construction and Building Materials, 36, 881-889.,doi: 10.1016/j.conbuildmat.2012.06.060. Search in Google Scholar

[28] Mohammed, T.U., & Rahman, N. (2016). Effect of types of aggregate and sand-to-aggregate volume ratio on UPV in concrete. Construction and Building Materials, 125, 832-841. doi: 10.1016/j.conbuildmat.2016.08.102. Search in Google Scholar