<abstract xmlns="http://www.w3.org/1999/xhtml">This paper presents the results of an experimental study that investigates the compression behavior of concrete and evaluates the effect of hybrid reinforcement by multiple geometries, and total and partial confinement, using CFRP and GFRP composite materials.A total of nine (09) variants of concrete cylindrical specimens, including one (01) variant of unconfined concrete and eight (08) variants of confined concrete with different geometries were subjected to axial load compression.The objectives of this study were to verify the applicability and effectiveness of partial and total confinement to improve the behavior of concrete, evaluate the effect of the hybrid confinement used, and obtain a typical reinforced model.The results obtained clearly show the effectiveness of the hybrid confinement and partially confined concrete in improving the compressive strength and deformation of the concrete, so it is possible to replace CFRP total confinement by partially confined concrete with two CFRP layers or by a hybrid confinement with a CFRP layer in the central zone and GFRP layers on the top and bottom of the specimen.</abstract>

This paper presents the results of an experimental study that investigates the compression behavior of concrete and evaluates the effect of hybrid reinforcement by multiple geometries, and total and partial confinement, using CFRP and GFRP composite materials.A total of nine (09) variants of concrete cylindrical specimens, including one (01) variant of unconfined concrete and eight (08) variants of confined concrete with different geometries were subjected to axial load compression.The objectives of this study were to verify the applicability and effectiveness of partial and total confinement to improve the behavior of concrete, evaluate the effect of the hybrid confinement used, and obtain a typical reinforced model.The results obtained clearly show the effectiveness of the hybrid confinement and partially confined concrete in improving the compressive strength and deformation of the concrete, so it is possible to replace CFRP total confinement by partially confined concrete with two CFRP layers or by a hybrid confinement with a CFRP layer in the central zone and GFRP layers on the top and bottom of the specimen.

Effectiveness of Hybrid and Partially Confined Concrete Subjected to Axial Compressive Loading Using CFRP and GFRP Composite Materials

University M’Hamed Bougara of Boumerdes

Slovak Journal of Civil Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This paper presents the results of an experimental study that investigates the compression behavior of concrete and evaluates the effect of hybrid...

Effectiveness of Hybrid and Partially Confined Concrete Subjected to Axial Compressive Loading Using CFRP and GFRP Composite Materials

Online veröffentlicht: 31. Dez. 2020

Seitenbereich: 8 - 14

DOI: https://doi.org/10.2478/sjce-2020-0025

Schlüsselwörter
Confinement, Hybrid, CFRP, GFRP, Compressive strength, Deformation

© 2020 Youcef Ghernouti et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Effectiveness of Hybrid and Partially Confined Concrete Subjected to Axial Compressive Loading Using CFRP and GFRP Composite Materials

Online veröffentlicht: 31. Dez. 2020

Seitenbereich: 8 - 14

DOI: https://doi.org/10.2478/sjce-2020-0025

SchlüsselwörterConfinement, Hybrid, CFRP, GFRP, Compressive strength, Deformation

© 2020 Youcef Ghernouti et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Schlüsselwörter
Confinement, Hybrid, CFRP, GFRP, Compressive strength, Deformation