<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The external bonding of carbon fiber-reinforced polymer (CFRP) strips by two-component epoxy adhesive on the concrete surfaces of buildings and bridges is a retrofitting method accepted worldwide. The gradient anchorage (GA) is an anchoring method especially developed to anchor prestressed CFRP strips to concrete elements without a need for mechanical clamping after the installation phase. This method takes advantage of the adhesives property to undergo accelerated curing when heated. The results of more than fifteen years of research on the development of the gradient anchorage at the Swiss Federal Laboratories for Materials Science and Technology (Empa) are presented in this paper. The basic principles and application steps are explained, and the main results starting from the development of the technique up to the testing of real scale girders are described, and the new challenges posed by this innovative system are highlighted. The gradient anchorage is a valid alternative to a mechanically anchored system for prestressed FRP (P-FRP).</p></abstract>

The external bonding of carbon fiber-reinforced polymer (CFRP) strips by two-component epoxy adhesive on the concrete surfaces of buildings and bridges is a retrofitting method accepted worldwide. The gradient anchorage (GA) is an anchoring method especially developed to anchor prestressed CFRP strips to concrete elements without a need for mechanical clamping after the installation phase. This method takes advantage of the adhesives property to undergo accelerated curing when heated. The results of more than fifteen years of research on the development of the gradient anchorage at the Swiss Federal Laboratories for Materials Science and Technology (Empa) are presented in this paper. The basic principles and application steps are explained, and the main results starting from the development of the technique up to the testing of real scale girders are described, and the new challenges posed by this innovative system are highlighted. The gradient anchorage is a valid alternative to a mechanically anchored system for prestressed FRP (P-FRP).

The Gradient Anchorage Method for Prestressed CFRP Strips: from the Development to the Strengthening of an 18 M Long Bridge Girder

Empa – Swiss Federal Laboratories for Materials Science and Technology

Slovak Journal of Civil Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The external bonding of carbon fiber-reinforced polymer (CFRP) strips by two-component epoxy adhesive on the concrete surfaces of buildings and bridges is a...

The Gradient Anchorage Method for Prestressed CFRP Strips: from the Development to the Strengthening of an 18 M Long Bridge Girder

Online veröffentlicht: 04. Okt. 2018

Seitenbereich: 29 - 40

DOI: https://doi.org/10.2478/sjce-2018-0018

Schlüsselwörter
CFRP, Concrete strengthening, Prestressed FRP, Gradient anchorage

© 2018 Matteo Breveglieri et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The Gradient Anchorage Method for Prestressed CFRP Strips: from the Development to the Strengthening of an 18 M Long Bridge Girder

Online veröffentlicht: 04. Okt. 2018

Seitenbereich: 29 - 40

DOI: https://doi.org/10.2478/sjce-2018-0018

SchlüsselwörterCFRP, Concrete strengthening, Prestressed FRP, Gradient anchorage

© 2018 Matteo Breveglieri et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Schlüsselwörter
CFRP, Concrete strengthening, Prestressed FRP, Gradient anchorage