This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.
Patil R.R. and Desale P.S., Wear in stone crusher plate, International Journal of Advanced Research and Innovative Ideas in Education, 2015.PatilR.R.DesaleP.S.Wear in stone crusher plate2015Search in Google Scholar
Palmström A., Measurement and Characterization of Rock Mass Jointing, Chapter 2 of the book: In-Situ Characterization of Rocks, 2001.PalmströmA.Chapter 2 of the book: In-Situ Characterization of Rocks,2001Search in Google Scholar
Bajorek G., Kiernia-Hnat M., Skrzypczak I., Prognozowanie badań typu kruszyw budowlanych w zależności od zamierzonego stosowania (Forecasting of construction aggregate research in the intended proceedings), Materiały Budowlane (Building materials), ISSN 0137-2971, nr 3, s. 80–82, 2013 (in Polish).BajorekG.Kiernia-HnatM.SkrzypczakI.Prognozowanie badań typu kruszyw budowlanych w zależności od zamierzonego stosowania(Forecasting of construction aggregate research in the intended proceedings),(Building materials), ISSN 0137-2971,380822013(in Polish).Search in Google Scholar
Donovan J.G., Fracture toughness based models for the prediction of power consumption, product size, and capacity of jaw crushers, Doctoral dissertation, Virginia Polytechnic Institute and State University, 2003, https://vtechworks.lib.vt.edu/bitstream/handle/10919/28544/Dissertation.pdf?sequence=1.DonovanJ.G.Doctoral dissertation,Virginia Polytechnic Institute and State University2003https://vtechworks.lib.vt.edu/bitstream/handle/10919/28544/Dissertation.pdf?sequence=1.Search in Google Scholar
Jinxi C., Zhiyu Q., Guopeng W., Xingfu R. and Shichun Y., Investigation on kinematic features of multi-liners in coupler plane of single toggle jaw crusher, Industrial Electronics and Applications, p. 1639–1642, 2007.JinxiC.ZhiyuQ.GuopengW.XingfuR.ShichunY.Industrial Electronics and Applications16391642200710.1109/ICIEA.2007.4318687Search in Google Scholar
Nowak A., Gawenda T., Analiza porównawcza kruszarek w wielostadialnych układach rozdrabniania skał bazaltowych (The comparative analysis of crushers in basalt rocks comminution multiple stage systems), Czasopismo Górnictwo i Geoinżynieria, (Mining and Geoengineering), ISSN 1732-6702, tom R. 30, z. 3/1, s. 267–278, 2006 (in Polish).NowakA.GawendaT.Analiza porównawcza kruszarek w wielostadialnych układach rozdrabniania skał bazaltowych(The comparative analysis of crushers in basalt rocks comminution multiple stage systems),(Mining and Geoengineering), ISSN 1732-6702, tom R. 30, z. 3/1, s.2672782006(in Polish).Search in Google Scholar
Napier-Munn T.J., Morrell S., Morrison R.D., Kojovic T., Mineral com-minution circuits – their operation and optimization. Julius Kruttschnitt Min-eral Research Centre, Monograph vol. 2, The University of Queensland, Brisbane, Australia, 1996.Napier-MunnT.J.MorrellS.MorrisonR.D.KojovicT.Julius Kruttschnitt Min-eral Research Centre, Monograph vol. 2,The University of QueenslandBrisbane, Australia1996Search in Google Scholar
Oduori M.F., Mutuli S.M., and Munyasi D.M., Analysis of the single toggle jaw crusher kinematics, Journal of Engineering, Design and Technology, vol. 13, no. 2, pp. 213–239, 2015.OduoriM.F.MutuliS.M.MunyasiD.M.Analysis of the single toggle jaw crusher kinematics, Journal of Engineering132213239201510.1108/JEDT-01-2013-0001Search in Google Scholar
Zawada J., Pawlak W.R., EinfluB der Oberflachenform von brechplatten fur backenbrecher auf das Zerkleinerungsergebnis. Aufbereitungs-Technik, Nr 3, 1988.ZawadaJ.PawlakW.R.EinfluB der Oberflachenform von brechplatten fur backenbrecher auf das Zerkleinerungsergebnis31988Search in Google Scholar
Zeng Y., Forssberg E., Application of vibration signals to monitoring crushing parameters, Powder Technology, Vol. 76, pp. 247–252, 1993.ZengY.ForssbergE.Application of vibration signals to monitoring crushing parameters76247252199310.1016/S0032-5910(05)80005-1Search in Google Scholar
Theron D.A., Aldrich C., Acoustic estimation of the particle size distributions of sulphide ores in a laboratory ball mill. J. S. Afr. Inst. Min. Metall. 100, 243–248, 2000.TheronD.A.AldrichC.Acoustic estimation of the particle size distributions of sulphide ores in a laboratory ball mill1002432482000Search in Google Scholar
Tromans D., Mineral comminution: energy efficiency considerations, Miner Eng, 21, pp. 613–620, 2008.TromansD.Mineral comminution: energy efficiency considerations21613620200810.1016/j.mineng.2007.12.003Search in Google Scholar
Zawada J. (red.), Buczyński A., Chochoł K., Rzeszot J., Wprowadzenie do mechaniki maszynowych procesów kruszenia (na przykładzie kruszarek szczękowych). (An introduction to the mechanics of machine crushing processes for jaw crusher). Wyd. Instytutu Technologii Eksploatacji w Radomiu, Warszawa 2005 (in Polish).ZawadaJ.(red.),BuczyńskiA.ChochołK.RzeszotJ.(An introduction to the mechanics of machine crushing processes for jaw crusher).Wyd. Instytutu Technologii Eksploatacji w RadomiuWarszawa2005(in Polish).Search in Google Scholar
Ciężkowski P. (red.), Kruszenie skał - teoria, eksperyment i zastosowania inżynierskie. (Rock Crushing – theory, experiments and engineering use) Instytut Technologii Eksploatacji -PIB, Radom ul. K. Pułaskiego 6/10, Radom, 26–600: Instytut Maszyn Roboczych Ciężkich, 2016 (in Polish).CiężkowskiP.(red.),(Rock Crushing – theory, experiments and engineering use) Instytut Technologii Eksploatacji -PIB, Radom ul. K. Pułaskiego 6/10, Radom, 26–600: Instytut Maszyn Roboczych Ciężkich,2016(in Polish).Search in Google Scholar
Ciężkowski P., Bąk S., Kuśmierczyk J., Load distribution of a fixed jaw for sandstone „Mucharz” crushing, AGH Journal of Mining and Geoengineering, ISSN 1732-6702, Vol. 37, no. 2, s. 15–23, 2013.CiężkowskiP.BąkS.KuśmierczykJ.Load distribution of a fixed jaw for sandstone „Mucharz” crushingISSN 1732-6702,3721523201310.7494/mining.2013.37.2.15Search in Google Scholar
Ciężkowski P., Correlation of energy consumption and shape of crushing plates, Górnictwo i Geoinżynieria, 2012, 36, s. 91–100.CiężkowskiP.Correlation of energy consumption and shape of crushing plates20123691100Search in Google Scholar
Ciężkowski P., Doświadczalne badania sił kruszenia szczękami o różnym kształcie, (Experimental investigations of crushing forces generated by variable shape jaws), Zeszyty Naukowe Instytutu Pojazdów, (Proceedings of the Institute of Vehicles Warsaw University of Technology, ISSN 1642–247X), 2012, 2/88, s. 21–34 (in Polish).CiężkowskiP.Doświadczalne badania sił kruszenia szczękami o różnym kształcie(Experimental investigations of crushing forces generated by variable shape jaws),(Proceedings of the Institute of Vehicles Warsaw University of Technology, ISSN 1642–247X),20122882134(in Polish).Search in Google Scholar
Ciężkowski P., Maciejewski J., Badania i analiza maszynowego procesu rozdrabniania wapienia zwartego Morawica, (Experimental analysis of limestone crushing process) Przegląd Mechaniczny, nr 5, s. 35–41, 2014 (in Polish).CiężkowskiP.MaciejewskiJ.Badania i analiza maszynowego procesu rozdrabniania wapienia zwartego Morawica(Experimental analysis of limestone crushing process)535412014(in Polish).Search in Google Scholar
Ciężkowski P., Maciejewski J., Bąk S., Evaluation of Influence of Crushing Plates Shape on „Mucharz” Sandstone Crushing Process, w: Proceedings of the 6th International Congress on Technical Diagnostic / Timofiejczuk Anna [i in.] (red.), 2018, ISBN 978-3-319-62041-1, ss. 239–252, DOI: 10.1007/978-3-319-62042-8_22.CiężkowskiP.MaciejewskiJ.BąkS.w:Proceedings of the 6th International Congress on Technical Diagnostic / Timofiejczuk Anna[i in.] (red.),2018ISBN 978-3-319-62041-1,23925210.1007/978-3-319-62042-8_22Open DOISearch in Google Scholar
Ciężkowski P., Maciejewski J., Bąk S., Experimental studies on the efficiency of the crushing processes, LAP LAMBERT Academic Publishing, ISBN 978-613-9-84936-9, 2018, s. 1–84.CiężkowskiP.MaciejewskiJ.BąkS.LAP LAMBERT Academic PublishingISBN 978-613-9-84936-9,2018184Search in Google Scholar
Kobiałka R., Naziemiec Z., Badania procesu kruszenia szczękami o różnym profilu poprzecznym, (Researches over crushing process conducting by various transverse profile jaws) Górnictwo i Geoinżynieria, (Mining and Geoengineering) numer 30, zeszyt 3/1, s. 125–136, 2006 (in Polish).KobiałkaR.NaziemiecZ.Badania procesu kruszenia szczękami o różnym profilu poprzecznym(Researches over crushing process conducting by various transverse profile jaws)(Mining and Geoengineering) numer 30, zeszyt 3/1,1251362006(in Polish).Search in Google Scholar
Lindqvist M., Evertsson C.M., Minerals Engineering, Volume 16, Issue 1, January 2003, Pages 1–12, doi.org/10.1016/S0892-6875(02)00179-6.LindqvistM.EvertssonC.M.161January2003112doi.org/10.1016/S0892-6875(02)00179-6.10.1016/S0892-6875(02)00179-6Search in Google Scholar
Numbi B.P., Zhang J., Xia X., Optimal energy management for a jaw crushing process in deep mines, Energy, Volume 68, 15 April 2014, Pages 337–348, https://doi.org/10.1016/j.energy.2014.02.100.NumbiB.P.ZhangJ.XiaX.Optimal energy management for a jaw crushing process in deep mines6815April2014337348https://doi.org/10.1016/j.energy.2014.02.100.10.1016/j.energy.2014.02.100Search in Google Scholar
Zawada J., Obciążenia graniczne i pękanie skał, (Limit loads and fracture of rocks in model processes of crushing) Wyd. Nauk. PWN, Warszawa, 1995, (in Polish).ZawadaJ.(Limit loads and fracture of rocks in model processes of crushing)Wyd. Nauk. PWNWarszawa1995(in Polish).Search in Google Scholar
Hill R., The mathematical theory of plasticity. Oxford 1950HillR.Oxford1950Search in Google Scholar
Sokołowski W.W., Teoria plastyczności (Theory of plasticity), PWN, Warszawa 1957 (in Polish).SokołowskiW.W.(Theory of plasticity),PWNWarszawa1957(in Polish).Search in Google Scholar
Olszak W., Perzyna P. Sawczuk A., Praca zbiorowa pod redakcją, Teoria plastyczności (Theory of plasticity), PWN, Warszawa 1965, (in Polish).OlszakW.PerzynaP.SawczukA.(Theory of plasticity),PWNWarszawa1965(in Polish).Search in Google Scholar
Szczepiński W., Indentation of a plastic block by two opposite narrow punches. Bull. Acad. Polon. Sci., Ser. Sci. Techn. 14, 671–676, 1964.SzczepińskiW.Indentation of a plastic block by two opposite narrow punches146716761964Search in Google Scholar
Szczepiński W., Wstęp do analizy procesów obróbki plastycznej (Introduction to the analysis of plastic forming processes), PWN, Warszawa 1967, (in Polish).SzczepińskiW.(Introduction to the analysis of plastic forming processes),PWNWarszawa1967(in Polish).Search in Google Scholar
Izbicki R.J., Mróz Z., Metody nośności granicznej w mechanice gruntów i skał (Limits analysis methods for the bearing capacity in mechanics of soil and rock), PWN, 1976 (in Polish).IzbickiR.J.MrózZ.(Limits analysis methods for the bearing capacity in mechanics of soil and rock),PWN1976(in Polish).Search in Google Scholar
Zawada J., Obciążenia graniczne skał w modelowych procesach (Limit loads of rocks in model processes), Wydawnictwo Politechniki Warszawskiej, Warszawa 1991 (in Polish).ZawadaJ.(Limit loads of rocks in model processes),Wydawnictwo Politechniki WarszawskiejWarszawa1991(in Polish).Search in Google Scholar
Chen W.F., Drucker D.C., Bearing Capacity of concrete blocks or rock. J. Eng. Mech. Division, Proceed. ASCE, vol. 95, No EM4, 955–978, 1969ChenW.F.DruckerD.C.Bearing Capacity of concrete blocks or rock95EM4955978196910.1061/JMCEA3.0001149Search in Google Scholar
Prandtl L., Über die Härte Plastischer Körper. Nachr Ges, Wissensch, Göttingen, Math.-Phys. Klasse, 1920, 74–85.PrandtlL.Nachr Ges, WissenschGöttingenMath.-Phys. Klasse,19207485Search in Google Scholar
Gawenda T., Rozdrabnianie surowców skalnych w kruszarce szczękowej typu L44.41. (Crushing of raw materials rock in a jaw crusher type L44.41) Surowce i Maszyny Budowlane (Raw materials and construction machinery), nr 2, pp. 37–42, Wydawnictwo BMP, 2010, Racibórz 10 (in Polish).GawendaT.Rozdrabnianie surowców skalnych w kruszarce szczękowej typu L44.41(Crushing of raw materials rock in a jaw crusher type L44.41)(Raw materials and construction machinery),23742Wydawnictwo BMP2010Racibórz10(in Polish).Search in Google Scholar
Rajan B. and Singh D., Investigation on effects of different crushing stages on morphology of coarse and fine aggregates, International Journal of Pavement Engineering, DOI: 10.1080/10298436.2018.1449, 2018.RajanB.SinghD.Investigation on effects of different crushing stages on morphology of coarse and fine aggregates10.1080/10298436.2018.14492018Open DOISearch in Google Scholar
Frankiewicz W., Zmiany określania jakości kruszyw drogowych na przykładzie normy PN-EN 13043:2004 (Modifications of determination of aggregates’ for roads quality based on the norm: PN-EN 13043:2004), Prace Naukowe Instytutu Górnictwa Politechniki Wrocławskiej. Konferencje, ISSN 0324-9670, vol. 115, nr 46, s. 19–22, 2006 (in Polish).FrankiewiczW.Zmiany określania jakości kruszyw drogowych na przykładzie normy PN-EN 13043:2004(Modifications of determination of aggregates’ for roads quality based on the norm: PN-EN 13043:2004),Konferencje, ISSN 0324-9670,1154619222006(in Polish).Search in Google Scholar
Grzelak E., Technologia kruszyw mineralnych (Technology of minerals aggregates). Arkady, Warszawa 1973 (in Polish).GrzelakE.(Technology of minerals aggregates).ArkadyWarszawa1973(in Polish).Search in Google Scholar
Kurdowski W., Poradnik technologa przemysłu cementowego. (Guide for cement industry technologist) Arkady, Warszawa, 1981 (in Polish).KurdowskiW.(Guide for cement industry technologist)ArkadyWarszawa1981(in Polish).Search in Google Scholar
Malewski J., Metody obliczania wydajności kruszarek, (The method of prediction of crushers capacity) Prace Naukowe Instytutu Górnictwa Politechniki Wrocławskiej. Konferencje, ISSN 0324-9670, vol. 97, nr 33, s. 135–146, 2002 (in Polish).MalewskiJ.Metody obliczania wydajności kruszarek(The method of prediction of crushers capacity)Konferencje, ISSN 0324-9670,97331351462002(in Polish).Search in Google Scholar