<abstract xmlns="http://www.w3.org/1999/xhtml"><p>In this paper, results of numerical simulations and measurements are presented concerning the non-uniform torsion and bending of an angled members of hollow cross-section. In numerical simulation, our linear-elastic 3D Timoshenko warping beam finite element is used, which allows consideration of non-uniform torsion. The finite element is suitable for analysis of spatial structures consisting of beams with constant open and closed cross-sections. The effect of the secondary torsional moment and of the shear forces on the deformation is included in the local finite beam element stiffness matrix. The warping part of the first derivative of the twist angle due to bimoment is considered as an additional degree of freedom at the nodes of the finite elements. Standard beam, shell and solid finite elements are also used in the comparative stress and deformation simulations. Results of the numerical experiments are discussed, compared, and evaluated. Measurements are performed for confirmation of the calculated results.</p></abstract>

In this paper, results of numerical simulations and measurements are presented concerning the non-uniform torsion and bending of an angled members of hollow cross-section. In numerical simulation, our linear-elastic 3D Timoshenko warping beam finite element is used, which allows consideration of non-uniform torsion. The finite element is suitable for analysis of spatial structures consisting of beams with constant open and closed cross-sections. The effect of the secondary torsional moment and of the shear forces on the deformation is included in the local finite beam element stiffness matrix. The warping part of the first derivative of the twist angle due to bimoment is considered as an additional degree of freedom at the nodes of the finite elements. Standard beam, shell and solid finite elements are also used in the comparative stress and deformation simulations. Results of the numerical experiments are discussed, compared, and evaluated. Measurements are performed for confirmation of the calculated results.

Effect of Non-Uniform Torsion on Elastostatics of a Frame of Hollow Rectangular Cross-Section

Slovak University of Technology in Bratislava

Faculty of Electrical Engineering and Information Technology, Department of Applied Mechanics and Mechatronics, IPEAE

Institute for Mechanics of Materials and Structures

Strojnícky časopis - Journal of Mechanical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

In this paper, results of numerical simulations and measurements are presented concerning the non-uniform torsion and bending of an angled members of hollow...

Effect of Non-Uniform Torsion on Elastostatics of a Frame of Hollow Rectangular Cross-Section

Online veröffentlicht: 19. Mai 2018

Seitenbereich: 35 - 52

DOI: https://doi.org/10.2478/scjme-2018-0016

Schlüsselwörter
Non-uniform torsion, Angled frame, Hollow rectangular cross-section, Measurements and numerical calculations

© 2018 Murín Justín et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Effect of Non-Uniform Torsion on Elastostatics of a Frame of Hollow Rectangular Cross-Section

Online veröffentlicht: 19. Mai 2018

Seitenbereich: 35 - 52

DOI: https://doi.org/10.2478/scjme-2018-0016

SchlüsselwörterNon-uniform torsion, Angled frame, Hollow rectangular cross-section, Measurements and numerical calculations

© 2018 Murín Justín et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
Non-uniform torsion, Angled frame, Hollow rectangular cross-section, Measurements and numerical calculations