Research of the Influence of Clamping Forces on the Roundness Deviations of the Pipes Turned Surface

1. ESTREMS, M., ARIZMENDI, M., ZABALETA, A. J., GIL, A. 2015. Numerical method to calculate the deformation of thin rings during turning operation and its influence on the roundness tolerance. Procedia Engineering, Vol. 132, pp. 872-879, DOI: 10.1016/j.proeng.2015.12.57210.1016/j.proeng.2015.12.572Open DOISearch in Google Scholar

2. ESTREMS, M., CARRERO-BLANCO, J., CUMBICUS, W.E., DE FRANCISCO, O., SÁNCHEZ, H.T. 2017. Contact mechanics applied to the machining of thin rings. Procedia Manufacturing, Vol. 13, p. 655-662, DOI: 10.1016/j.promfg.2017.09.13810.1016/j.promfg.2017.09.138Open DOISearch in Google Scholar

3. PEKLINIK, J. 1970. Geometrical adaptive control of manufacturing systems. CIRP Annals 18, pp. 265-272.Search in Google Scholar

4. SHAWKY, A., ROSENBERGER, T., ELBESTAWI, M. 1998. Inprocess monitoring and control of thickness error in machining hollow shafts. Mechatronics 8, pp.301-322.10.1016/S0957-4158(97)00064-0Search in Google Scholar

5. BRINKSMEIER, E., SÖLTER, J., GROTE, C. 2007. Distortion Engineering – Identification of Causes for Dimensional and Form Deviations of Bearing Rings. CIRP Annals, Vol. 56, Issue 1, pp. 109-112, DOI: 10.1016/j.cirp.2007.05.02810.1016/j.cirp.2007.05.028Open DOISearch in Google Scholar

6. GROTE, C., BRINKSMEIER, E., GARBRECHT, M. 2009. Distortion engineering in turning processes with standard clamping systems. Materialwissenschaft und Werkstofftechnik, Vol. 40, No 5-6, pp. 385-389, DOI: 10.1002/mawe.20090046410.1002/mawe.200900464Open DOISearch in Google Scholar

7. BEEKHUIS, B., STOEBENER, D., BRINKSMEIER, E. 2012. Adapted non-circular soft turning of bearing rings – Impact of process machine interactions on compensation potential. Procedia CIRP 1, pp. 540 – 54510.1016/j.procir.2012.04.096Search in Google Scholar

8. GÖRÖG, A., MARAČEKOVÁ, M. 2009. Vplyv upínania na odchýlku kruhovitosti pri sústružení rúr. (Effect of clamping on the roundness in turning of tubes.) Novus Scientia 2009, pp. 694-700. ISBN 978-80-553-0305-5Search in Google Scholar

9. MARAČEKOVÁ, M., ZVONČAN, M., GÖRÖG, A. 2012. Effect of clamping pressure on parts inaccuracy in turning. Tehnički Vjesnik - Technical Gazette. Vol. 19, No. 3, pp. 509-512. ISSN 1330-3651.Search in Google Scholar

10. MARAČEKOVÁ, M., GÖRÖG, A., BEŇO, M. 2011. Odchýlka kruhovitosti pri sústružení rúr. (Roundness deflection in turning of tubes.) Technologické fórum 2011, pp. 47-50. ISBN 978-80-01-04853-5.Search in Google Scholar

11. MARAČEKOVÁ, M., GÖRÖG, A., ZVONČAN, M., LAKOTA, S. 2011. Effect of clamping force on parts inaccuracy in turning. TEAM 2011, pp. 107-109. ISBN 978-953-55970-4-9.Search in Google Scholar

12. MARAČEKOVÁ, M., GÖRÖG, A. 2011. Vznik nepresností pri sústružení. (Occurence of inacuracies in turning.) Quaere 2011, pp. 262-268. ISBN 978-80-904877-3-4.Search in Google Scholar

13. ESTREMS, M., ARIZMENDI, M., CUMBICUS, W. E., LÓPEZ, A. 2015. Measurement of clamping forces in a 3-jaw chuck through an instrumented Aluminium ring. Procedia Engineering, Vol. 132, pp. 456-463, DOI: 10.1016/j.proeng.2015.12.51910.1016/j.proeng.2015.12.519Open DOISearch in Google Scholar

14. SUI, W., ZHANG, D. 2012. Four Methods for Roundness Evaluation. Physics Procedia, Vol. 24, part C, pp. 2159 – 2164. DOI: 10.1016/j.phpro.2012.02.31710.1016/j.phpro.2012.02.317Open DOISearch in Google Scholar