<abstract xmlns="http://www.w3.org/1999/xhtml"><p> Within the solving VEGA 1/0615/12 research project "Influence of 5-axis grinding parameters on the shank cutter´s geometric accuracy", the research team will measure and evaluate geometrical accuracy of the produced parts. They will use the contemporary measurement technology (for example the optical 3D scanners). During the past few years, significant changes have occurred in the field of geometrical accuracy. The objective of this contribution is to analyse the current standards in the field of geometric tolerance. It is necessary to bring an overview of the basic concepts and definitions in the field. It will prevent the use of outdated and invalidated terms and definitions in the field. The knowledge presented in the contribution will provide the new perspective of the measurement that will be evaluated according to the current standards.</p></abstract>

Within the solving VEGA 1/0615/12 research project "Influence of 5-axis grinding parameters on the shank cutter´s geometric accuracy", the research team will measure and evaluate geometrical accuracy of the produced parts. They will use the contemporary measurement technology (for example the optical 3D scanners). During the past few years, significant changes have occurred in the field of geometrical accuracy. The objective of this contribution is to analyse the current standards in the field of geometric tolerance. It is necessary to bring an overview of the basic concepts and definitions in the field. It will prevent the use of outdated and invalidated terms and definitions in the field. The knowledge presented in the contribution will provide the new perspective of the measurement that will be evaluated according to the current standards.

Current Concept of Geometrical Accuracy

Institute of Production Technologies, Faculty of Material Science and Technology in Trnava, Slovak University of Technology in Bratislava, Bottova 25, 91724 Trnava, Slovak Republic

Research Papers Faculty of Materials Science and Technology Slovak University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Current Concept of Geometrical Accuracy"}

Within the solving VEGA 1/0615/12 research project "Influence of 5-axis grinding parameters on the shank cutter´s geometric accuracy", the research team will...

Current Concept of Geometrical Accuracy

Online veröffentlicht: 25. Nov. 2014

Seitenbereich: 43 - 49

DOI: https://doi.org/10.2478/rput-2014-0026

Schlüsselwörter
geometric tolerance, form, orientation, location, run-out

© by Augustín Görög

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Current Concept of Geometrical Accuracy

Online veröffentlicht: 25. Nov. 2014

Seitenbereich: 43 - 49

DOI: https://doi.org/10.2478/rput-2014-0026

Schlüsselwörtergeometric tolerance, form, orientation, location, run-out

© by Augustín Görög

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
geometric tolerance, form, orientation, location, run-out