<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>A marine gas turbine enclosure must be designed to prevent overheating of the electrical and engine control components as well as diluting potential fuel leaks. In order to achieve an optimal enclosure design, a numerical study of the ventilation-ejection cooling mechanism of a gas turbine enclosure is carried out in this paper. The evaluation index of the ejection cooling performance is first proposed and the algorithm of numerical simulation is verified. On this basis, orthogonal combinations of structural parameters are carried out for the expansion angle α of the lobed nozzle and the spacing S between the outlet plane of the lobed nozzle and the inlet plane of the mixing tube. The flow and the temperature distribution inside the enclosure are analysed under different operating conditions. The results show that the influence of the lobed nozzle expansion angle α and the spacing S on the performance is not a single-valued function but the two influencing factors are mutually constrained and influenced by each other. For any spacing, the combined coefficient is optimal for the expansion angle α = 30°. When the expansion angle α = 45° and the spacing S = 100 mm, the combined coefficient and the temperature distribution inside the enclosure are optimal at the same time.</p>
</abstract>

A marine gas turbine enclosure must be designed to prevent overheating of the electrical and engine control components as well as diluting potential fuel leaks. In order to achieve an optimal enclosure design, a numerical study of the ventilation-ejection cooling mechanism of a gas turbine enclosure is carried out in this paper. The evaluation index of the ejection cooling performance is first proposed and the algorithm of numerical simulation is verified. On this basis, orthogonal combinations of structural parameters are carried out for the expansion angle α of the lobed nozzle and the spacing S between the outlet plane of the lobed nozzle and the inlet plane of the mixing tube. The flow and the temperature distribution inside the enclosure are analysed under different operating conditions. The results show that the influence of the lobed nozzle expansion angle α and the spacing S on the performance is not a single-valued function but the two influencing factors are mutually constrained and influenced by each other. For any spacing, the combined coefficient is optimal for the expansion angle α = 30°. When the expansion angle α = 45° and the spacing S = 100 mm, the combined coefficient and the temperature distribution inside the enclosure are optimal at the same time.

Numerical Study of the Ejection Cooling Mechanism of Ventilation for a Marine Gas Turbine Enclosure

Jiangsu University of Science and Technology

Nanjing University of Aeronautics & Astronautics

Polish Maritime Research

This work is licensed under the Creative Commons Attribution 4.0 International License.

A marine gas turbine enclosure must be designed to prevent overheating of the electrical and engine control components as well as diluting potential fuel...

Numerical Study of the Ejection Cooling Mechanism of Ventilation for a Marine Gas Turbine Enclosure

Online veröffentlicht: 29. Okt. 2022

Seitenbereich: 119 - 127

DOI: https://doi.org/10.2478/pomr-2022-0032

Schlüsselwörter
Gas Turbine Enclosure, Ejecting Cooling, Ventilation, CFD

© 2022 Hong Shi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Numerical Study of the Ejection Cooling Mechanism of Ventilation for a Marine Gas Turbine Enclosure

Online veröffentlicht: 29. Okt. 2022

Seitenbereich: 119 - 127

DOI: https://doi.org/10.2478/pomr-2022-0032

SchlüsselwörterGas Turbine Enclosure, Ejecting Cooling, Ventilation, CFD

© 2022 Hong Shi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Schlüsselwörter
Gas Turbine Enclosure, Ejecting Cooling, Ventilation, CFD