<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The purpose of this study is to explore the potentiality of wind propulsion on semi-submersible ships. A new type of Flettner rotor (two rotating cylinders) system installed on a semi-submersible ship is proposed. The structure and installation of two cylinders with a height of 20 m and a diameter of 14 m are introduced. The numerical simulation of the cylinder is carried out in Fluent software. The influence of apparent wind angle and spin ratio on the two cylinders are analysed, when the distance between two cylinders is 3D-13D (D is cylinder diameter). When the distance between two cylinders is 3D, the performance of the system increases with an increase in spin ratio. Moreover, the apparent wind angle also has an effect on the system performance. Specifically, the thrust contribution of the system at the apparent wind angle of 120° is the largest at the spin ratio of 3.0. The maximum thrust reaches 500 kN. When the spin ratio is 2.5 and the apparent wind angle is 120°, the maximum effective power of the system is 1734 kW. In addition, the influence of the two cylinders distance on system performance cannot be ignored. When the distance between the two cylinders is 7D and the spin ratio is 2.5, the effective power of the system reaches a maximum, which is 1932 kW.</p>
</abstract>

The purpose of this study is to explore the potentiality of wind propulsion on semi-submersible ships. A new type of Flettner rotor (two rotating cylinders) system installed on a semi-submersible ship is proposed. The structure and installation of two cylinders with a height of 20 m and a diameter of 14 m are introduced. The numerical simulation of the cylinder is carried out in Fluent software. The influence of apparent wind angle and spin ratio on the two cylinders are analysed, when the distance between two cylinders is 3D-13D (D is cylinder diameter). When the distance between two cylinders is 3D, the performance of the system increases with an increase in spin ratio. Moreover, the apparent wind angle also has an effect on the system performance. Specifically, the thrust contribution of the system at the apparent wind angle of 120° is the largest at the spin ratio of 3.0. The maximum thrust reaches 500 kN. When the spin ratio is 2.5 and the apparent wind angle is 120°, the maximum effective power of the system is 1734 kW. In addition, the influence of the two cylinders distance on system performance cannot be ignored. When the distance between the two cylinders is 7D and the spin ratio is 2.5, the effective power of the system reaches a maximum, which is 1932 kW.

Assisted Propulsion Device of a Semi-Submersible Ship Based on the Magnus Effect

Qingdao University of Science and Technology

Polish Maritime Research

This work is licensed under the Creative Commons Attribution 4.0 International License.

{"article-title":"Assisted Propulsion Device of a Semi-Submersible Ship Based on the Magnus Effect"}

The purpose of this study is to explore the potentiality of wind propulsion on semi-submersible ships. A new type of Flettner rotor (two rotating cylinders)...

Assisted Propulsion Device of a Semi-Submersible Ship Based on the Magnus Effect

Online veröffentlicht: 29. Okt. 2022

Seitenbereich: 33 - 46

DOI: https://doi.org/10.2478/pomr-2022-0023

Schlüsselwörter
Flettner rotor, Semi-submersible ship, Wind energy, Ship propulsion, Numerical simulation

© 2022 Jingze Lv et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Assisted Propulsion Device of a Semi-Submersible Ship Based on the Magnus Effect

Online veröffentlicht: 29. Okt. 2022

Seitenbereich: 33 - 46

DOI: https://doi.org/10.2478/pomr-2022-0023

SchlüsselwörterFlettner rotor, Semi-submersible ship, Wind energy, Ship propulsion, Numerical simulation

© 2022 Jingze Lv et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Schlüsselwörter
Flettner rotor, Semi-submersible ship, Wind energy, Ship propulsion, Numerical simulation