<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The dynamics of the installation process of marine risers subjected to shoal/deep seawater is studied. The riser is assumed to be a cantilevered Euler‒Bernoulli beam. The upper end of the riser is clamped on the vessel or the drilling platform. The lower end of the riser is connected to the Blowout Preventer Stack (BOPs) and Lower Marine Risers Package (LMRP). The lateral fluid forces induced by the sea wave and sea current are introduced into the governing equations of motion. The lateral displacement and stress distributions of the riser are obtained by solving the governing equation of the riser via Galerkin’s discretisation scheme and a fourth-order Runge‒Kutta algorithm. The results indicate that the riser exhibits different behaviours under various depths because of the different distributions of the flow velocity ranging from the sea surface to the seabed. In the case of shoal water, the dynamics of the riser are dominated by the sea wave, while in the case of deep water it is affected mainly by the sea current velocity and sea surface wind velocity.</p>
</abstract>

The dynamics of the installation process of marine risers subjected to shoal/deep seawater is studied. The riser is assumed to be a cantilevered Euler‒Bernoulli beam. The upper end of the riser is clamped on the vessel or the drilling platform. The lower end of the riser is connected to the Blowout Preventer Stack (BOPs) and Lower Marine Risers Package (LMRP). The lateral fluid forces induced by the sea wave and sea current are introduced into the governing equations of motion. The lateral displacement and stress distributions of the riser are obtained by solving the governing equation of the riser via Galerkin’s discretisation scheme and a fourth-order Runge‒Kutta algorithm. The results indicate that the riser exhibits different behaviours under various depths because of the different distributions of the flow velocity ranging from the sea surface to the seabed. In the case of shoal water, the dynamics of the riser are dominated by the sea wave, while in the case of deep water it is affected mainly by the sea current velocity and sea surface wind velocity.

Analysis of Marine Risers Subjected to Shoal/Deep Water in the Installation Process

Polish Maritime Research

This work is licensed under the Creative Commons Attribution 4.0 International License.

The dynamics of the installation process of marine risers subjected to shoal/deep seawater is studied. The riser is assumed to be a cantilevered...

Analysis of Marine Risers Subjected to Shoal/Deep Water in the Installation Process

Online veröffentlicht: 05. Aug. 2022

Seitenbereich: 43 - 54

DOI: https://doi.org/10.2478/pomr-2022-0016

Schlüsselwörter
sail catamaran, green shipping, zero emission, hybrid propulsion

© 2022 Yikun Wang et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Analysis of Marine Risers Subjected to Shoal/Deep Water in the Installation Process

Online veröffentlicht: 05. Aug. 2022

Seitenbereich: 43 - 54

DOI: https://doi.org/10.2478/pomr-2022-0016

Schlüsselwörtersail catamaran, green shipping, zero emission, hybrid propulsion

© 2022 Yikun Wang et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Schlüsselwörter
sail catamaran, green shipping, zero emission, hybrid propulsion