[
1. Fridsma G. (1969): A systematic study of the rough-water performance of planing boats. Stevens Inst of Tech, Hoboken, NJ, Davidson Lab.10.21236/AD0708694
]Search in Google Scholar
[
2. Savitsky D., Brown P. W. (1976): Procedures for hydrodynamic evaluation of planing hulls in smooth and rough water. Marine Technology, 13(4), 381-400.10.5957/mt1.1976.13.4.381
]Search in Google Scholar
[
3. Martin M. (1976): Theoretical Prediction of Motions of High-Speed Planing Boats in Waves. Journal of Ship Research, 22(3), 98.
]Search in Google Scholar
[
4. Zarnick E. E. (1978): A nonlinear mathematical model of motions of a planing boat in regular waves. David W Taylor Naval Ship Research and Development Center, Bethesda, MD.10.5962/bhl.title.47857
]Search in Google Scholar
[
5. Hicks J. D., Troesch A. W., Jiang C. (1995): Simulation and nonlinear dynamics analysis of planing hulls. Journal of Offshore Mechanics and Arctic Engineering, 17(1), 38-45.10.1115/1.2826989
]Search in Google Scholar
[
6. Akers R. H. (1999): Dynamic analysis of planing hulls in the vertical plane. Proceedings of the Society of Naval Architects and Marine Engineers, New England Section.
]Search in Google Scholar
[
7. Van Deyzen A. (2008): A nonlinear mathematical model of motions of a planing monohull in head seas. In Proceedings of the 6th International Conference on High Performance Marine Vehicles (HIPER’08).
]Search in Google Scholar
[
8. Sayeed T. M. (2010): Numerical simulation of planing hull in regular waves. Memorial University of Newfoundland.
]Search in Google Scholar
[
9. Ruscelli D. (2009): Dynamics of high-speed craft. PhD Thesis, University of Genoa, Genoa.
]Search in Google Scholar
[
10. Pennino S. (2014): Vertical Motion Assessment for Planing Hulls. PhD Thesis, University of Naples Federico II, Naples, Italy.
]Search in Google Scholar
[
11. Von Karman T. (1929): The impact on seaplane floats during landing. National Advisory Committee on Aeuronautics, Washington, DC.
]Search in Google Scholar
[
12. Wagner H. (1932): Über Stoß-und Gleitvorgänge an der Oberfläche von Flüssigkeiten. ZAMM-Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik, 12(4), 193-215.10.1002/zamm.19320120402
]Search in Google Scholar
[
13. Howison S., Ockendon J., Wilson S. (1991): Incompressible water-entry problems at small deadrise angles. Journal of Fluid Mechanics, 222, 215-230.10.1017/S0022112091001076
]Search in Google Scholar
[
14. Oliver J. M. (2002): Water entry and related problems. PhD Thesis, University of Oxford.
]Search in Google Scholar
[
15. Smiley R. F. (1951): A Semiempirical Procedure for Computing the Water-Pressure Distribution on Flat and V-Bottom Prismatic Surfaces During Impact or Planing. National Advisory Committee for Aeronautics, Washington, DC.
]Search in Google Scholar
[
16. Smiley R. F. (1952): Water-pressure distribution during landings of a prismatic model having an angle of dead rise of 22 1/2 degrees and beam-loading coefficients of 0.48 and 0.97. National Advisory Committee for Aeronautics, Washington, DC.
]Search in Google Scholar
[
17. Gray H. P., Allen R. G., Jones R. R. (1972): Prediction of Three-Dimensional Pressure Distributions of V-Shaped Prismatic Wedges during Impact or Planing. David W Taylor Naval Ship Research and Development Center, Bethesda, MD.
]Search in Google Scholar
[
18. Rosén A., Garme K. (2004): Model experiment addressing the impact pressure distribution on planing craft in waves. International Journal of Small Craft Technology, 146.
]Search in Google Scholar
[
19. Rosén A. (2005): Impact pressure distribution reconstruction from discrete point measurements. International Shipbuilding Progress, 52(1), 91-107.
]Search in Google Scholar
[
20. Camilleri J., Taunton D., Temarel P. (2018): Full-scale measurements of slamming loads and responses on high-speed planing craft in waves. Journal of Fluids and Structures, 81, 201-229.10.1016/j.jfluidstructs.2018.05.006
]Search in Google Scholar
[
21. Razola M., Rosén A., Garme K. (2014): Allen and Jones revisited. Ocean Engineering, 89, 119-133.10.1016/j.oceaneng.2014.07.005
]Search in Google Scholar
[
22. Allen R. G., Jones R. R., Taylor D. W. (1978): A simplified method for determining structural design-limit pressures on high performance marine vehicles. In Advanced Marine Vehicles Conference.10.2514/6.1978-754
]Search in Google Scholar
[
23. Ghadimi P., Tavakoli S., Dashtimanesh A. (2016): Calm water performance of hard-chine vessels in semi-planing and planing regimes. Polish Maritime Research, 23(4), 23-45.10.1515/pomr-2016-0068
]Search in Google Scholar
[
24. Ghassemi H., Kamarlouei M., Veysi S. T. G. (2015): A hydrodynamic methodology and CFD analysis for performance prediction of stepped planing hulls. Polish Maritime Research, 22(2), 23-31.10.1515/pomr-2015-0014
]Search in Google Scholar
[
25. Jones R. R., Allen R. G. (1972): A Semiempirical Computerized Method for Predicting Three-Dimensional Hull-Water Impact Pressure Distributions and Forces on High-Performance Hulls. David W Taylor Naval Ship Research and Development Center, Bethesda, MD.10.21236/AD0762429
]Search in Google Scholar
[
26. Shuford Jr C. L. (1958): A theoretical and experimental study of planing surfaces including effects of cross section and plan form. National Advisory Committee for Aeronautics, Washington, DC.
]Search in Google Scholar
[
27. ITTC Member Organisations. Available from: https://ittc.info/members/member-organisations/national-iranian-marine-laboratory-nimala/.
]Search in Google Scholar
[
28. Yang S.-I., et al. (1996): The Prediction of Resistance of a 23m Class Planing Hull. Journal of Hydrospace Technology, 2(2), 68-79.
]Search in Google Scholar
[
29. Zeraatgar H., et al. (2019): Sampling rate effect on wedge pressure record in water entry by experiment. Ocean Engineering, 179, 51-58.10.1016/j.oceaneng.2019.03.006
]Search in Google Scholar
