<abstract xmlns="http://www.w3.org/1999/xhtml"><p>In the shipbuilding industry, it is difficult to create CAD models of existing or prototype parts, especially with many freeform surfaces. The paper presents the creation of the CAD 3D model of a shipbuilding component with the application of the reverse engineering technology. Based on the data obtained from the digitization process, the component is reconstructed in point cloud processing programs and the CAD model is created. Finally, the accuracy of the digital model is estimated.</p></abstract>

In the shipbuilding industry, it is difficult to create CAD models of existing or prototype parts, especially with many freeform surfaces. The paper presents the creation of the CAD 3D model of a shipbuilding component with the application of the reverse engineering technology. Based on the data obtained from the digitization process, the component is reconstructed in point cloud processing programs and the CAD model is created. Finally, the accuracy of the digital model is estimated.

Application of Reverse Engineering Technology in Part Design for Shipbuilding Industry

Faculty of Mechanical Engineering, Department of Manufacturing and Production Engineering

Polish Maritime Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

In the shipbuilding industry, it is difficult to create CAD models of existing or prototype parts, especially with many freeform surfaces. The paper presents...

Application of Reverse Engineering Technology in Part Design for Shipbuilding Industry

Online veröffentlicht: 12. Juli 2019

Seitenbereich: 126 - 133

DOI: https://doi.org/10.2478/pomr-2019-0032

Schlüsselwörter
reverse engineering, laser scanning, freeform surface, measurement techniques

© 2019 Mariusz Deja et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Application of Reverse Engineering Technology in Part Design for Shipbuilding Industry

Online veröffentlicht: 12. Juli 2019

Seitenbereich: 126 - 133

DOI: https://doi.org/10.2478/pomr-2019-0032

Schlüsselwörterreverse engineering, laser scanning, freeform surface, measurement techniques

© 2019 Mariusz Deja et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Schlüsselwörter
reverse engineering, laser scanning, freeform surface, measurement techniques