<abstract xmlns="http://www.w3.org/1999/xhtml"><p> The article presents a detailed discussion of the theoretical models of four different fluid dynamic devices: an ideal propulsor, an ideal fluid brake, an ideal screw propeller and an ideal turbine. The four models are presented with all relevant mathematical formulae regarding the forces, the power and the efficiency. It is demonstrated that the application of the model of an ideal optimum fluid brake according to the Betz theorem for determination of the maximum effectiveness coefficient of an axial wind turbine is not correct. In the case of a turbine the inclusion of important rotational flow losses may increase the maximum value of the turbine effectiveness coefficient above the level defined by Betz. Therefore the model of an ideal turbine should be an inversion of the model of an ideal screw propeller. This conclusion is supported by numerical calculations. It may influence the design procedures of wind turbines and may lead to increase in their efficiency.</p></abstract>

The article presents a detailed discussion of the theoretical models of four different fluid dynamic devices: an ideal propulsor, an ideal fluid brake, an ideal screw propeller and an ideal turbine. The four models are presented with all relevant mathematical formulae regarding the forces, the power and the efficiency. It is demonstrated that the application of the model of an ideal optimum fluid brake according to the Betz theorem for determination of the maximum effectiveness coefficient of an axial wind turbine is not correct. In the case of a turbine the inclusion of important rotational flow losses may increase the maximum value of the turbine effectiveness coefficient above the level defined by Betz. Therefore the model of an ideal turbine should be an inversion of the model of an ideal screw propeller. This conclusion is supported by numerical calculations. It may influence the design procedures of wind turbines and may lead to increase in their efficiency.

Comparative analysis of the theoretical models of ideal propulsor, ideal fluid brake, ideal screw propeller and ideal axial wind turbine

The Szewalski Institute of Fluid Flow Machinery, Polish Academy of Sciences, Fiszera 14, 80-952 Gdansk, POLAND

Faculty of Mechanical Engineering, Gdansk University of Technology, Narutowicza 11/12, 80-233 Gdansk, POLAND

Polish Maritime Research

The article presents a detailed discussion of the theoretical models of four different fluid dynamic devices: an ideal propulsor, an ideal fluid brake, an...

Comparative analysis of the theoretical models of ideal propulsor, ideal fluid brake, ideal screw propeller and ideal axial wind turbine

Online veröffentlicht: 10. Juli 2013

Seitenbereich: 3 - 12

DOI: https://doi.org/10.2478/pomr-2013-0011

Schlüsselwörter
ideal propeller, ideal wind turbine, Betz theorem, maximum efficiency

This content is open access.

Comparative analysis of the theoretical models of ideal propulsor, ideal fluid brake, ideal screw propeller and ideal axial wind turbine

Online veröffentlicht: 10. Juli 2013

Seitenbereich: 3 - 12

DOI: https://doi.org/10.2478/pomr-2013-0011

Schlüsselwörterideal propeller, ideal wind turbine, Betz theorem, maximum efficiency

This content is open access.

Schlüsselwörter
ideal propeller, ideal wind turbine, Betz theorem, maximum efficiency