<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>In this paper, a new combustor with an output of 5 t/h is designed based on a computational particle fluid dynamics (CPFD) model. The flow field simulation is combined with the combustion simulation to analyze the internal two-phase flow, temperature field, and combustion products. The combustor structure was optimized. The simulation results show that the recovery efficiency of the waste sand and the energy utilization of the combustor can be improved under the original structure. The sand bed has a significant effect on flow field characteristics. The increase in particle temperature in the combustor increases the efficiency of waste sand recovery by increasing the height of the sand bed by 50 mm. The utilization rate of natural gas is increased and the economic efficiency is improved. The feasibility of the CPFD method can simulate the flow field characteristics inside the combustor very effectively.</p>
</abstract>

In this paper, a new combustor with an output of 5 t/h is designed based on a computational particle fluid dynamics (CPFD) model. The flow field simulation is combined with the combustion simulation to analyze the internal two-phase flow, temperature field, and combustion products. The combustor structure was optimized. The simulation results show that the recovery efficiency of the waste sand and the energy utilization of the combustor can be improved under the original structure. The sand bed has a significant effect on flow field characteristics. The increase in particle temperature in the combustor increases the efficiency of waste sand recovery by increasing the height of the sand bed by 50 mm. The utilization rate of natural gas is increased and the economic efficiency is improved. The feasibility of the CPFD method can simulate the flow field characteristics inside the combustor very effectively.

Numerical simulation and improvement of combustor structure in 3D printed sand recycling system

China University of Petroleum (East China)

Polish Journal of Chemical Technology

This work is licensed under the Creative Commons Attribution 4.0 International License.

In this paper, a new combustor with an output of 5 t/h is designed based on a computational particle fluid dynamics (CPFD) model. The flow field simulation is...

Numerical simulation and improvement of combustor structure in 3D printed sand recycling system

Online veröffentlicht: 11. Jan. 2024

Seitenbereich: 19 - 27

DOI: https://doi.org/10.2478/pjct-2023-0034

Schlüsselwörter
3D printing, CPFD, thermal reclamation of used sand

© 2023 Xiao Gao et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Numerical simulation and improvement of combustor structure in 3D printed sand recycling system

Online veröffentlicht: 11. Jan. 2024

Seitenbereich: 19 - 27

DOI: https://doi.org/10.2478/pjct-2023-0034

Schlüsselwörter3D printing, CPFD, thermal reclamation of used sand

© 2023 Xiao Gao et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Schlüsselwörter
3D printing, CPFD, thermal reclamation of used sand