<abstract xmlns="http://www.w3.org/1999/xhtml">

The carbonaceous precursor was obtained via pyrolysis of commercial aramid polymer (Kevlar). Additionally the precursor was activated at 1000°C in CO2 atmosphere for different times. Obtained materials were characterised by BET; XPS; SEM and optical microscopy. The sorption capacities were determined by temperature swing adsorption performed in TGA apparatus for CO2 and C2H4 gases. The obtained materials exhibit high difference in sorption of these gases i.e. 1.5 and 2.8 mmol/g @30°C respectively and high SSA ~1600 m2/g what can be applied in separation applications. The highest uptakes were 1.8 and 3.1 mmol/g @30°C respectively. It was found that the presence of oxygen and nitrogen functional groups enhances C2H4/CO2 uptake ratio.
</abstract>

The carbonaceous precursor was obtained via pyrolysis of commercial aramid polymer (Kevlar). Additionally the precursor was activated at 1000°C in CO2 atmosphere for different times. Obtained materials were characterised by BET; XPS; SEM and optical microscopy. The sorption capacities were determined by temperature swing adsorption performed in TGA apparatus for CO2 and C2H4 gases. The obtained materials exhibit high difference in sorption of these gases i.e. 1.5 and 2.8 mmol/g @30°C respectively and high SSA ~1600 m2/g what can be applied in separation applications. The highest uptakes were 1.8 and 3.1 mmol/g @30°C respectively. It was found that the presence of oxygen and nitrogen functional groups enhances C2H4/CO2 uptake ratio.

Commercial Kevlar derived activated carbons for CO2 and C2H4 sorption

Szczecin, Faculty of Chemical Technology and Engineering, Department of Catalytic and Sorbent Materials Engineering

Polish Journal of Chemical Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Commercial Kevlar derived activated carbons for CO and CH sorption

The carbonaceous precursor was obtained via pyrolysis of commercial aramid polymer (Kevlar). Additionally the precursor was activated at 1000°C in CO2...

Commercial Kevlar derived activated carbons for CO₂ and C₂H₄ sorption

Online veröffentlicht: 15. Juli 2021

Seitenbereich: 81 - 87

DOI: https://doi.org/10.2478/pjct-2021-0021

Schlüsselwörter
activated carbon, carbonaceous catalysts, autoxidation, alpha-pinene, iron particles, biomass

© 2021 M. Kaliszewski et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Commercial Kevlar derived activated carbons for CO2 and C2H4 sorption

Online veröffentlicht: 15. Juli 2021

Seitenbereich: 81 - 87

DOI: https://doi.org/10.2478/pjct-2021-0021

Schlüsselwörteractivated carbon, carbonaceous catalysts, autoxidation, alpha-pinene, iron particles, biomass

© 2021 M. Kaliszewski et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Commercial Kevlar derived activated carbons for CO₂ and C₂H₄ sorption

Schlüsselwörter
activated carbon, carbonaceous catalysts, autoxidation, alpha-pinene, iron particles, biomass