<abstract xmlns="http://www.w3.org/1999/xhtml"> Phenol formaldehyde resins were filled with mixtures of corundum Al2O3 and carbon C powders to produce thermoprotective composites. The composites were treated with hot combustion gases to determinate the temperature profiles across rectangular samples of dimensions 10x25x35 mm. The carbonization of the thermosetting matrix was observed. It was qualified the qualitative and the quantitative effect of components on the ablation surface temperature, the back side temperature of specimen and the mass waste under intensive heat fl ow after 120 s of treatment with hot combustion gases. The composites with higher matrix content (more liquid resin and less adhesive resin) and with predominance of corundum Al2O3 over carbon powder C showed the best insulating properties.</abstract>

Phenol formaldehyde resins were filled with mixtures of corundum Al2O3 and carbon C powders to produce thermoprotective composites. The composites were treated with hot combustion gases to determinate the temperature profiles across rectangular samples of dimensions 10x25x35 mm. The carbonization of the thermosetting matrix was observed. It was qualified the qualitative and the quantitative effect of components on the ablation surface temperature, the back side temperature of specimen and the mass waste under intensive heat fl ow after 120 s of treatment with hot combustion gases. The composites with higher matrix content (more liquid resin and less adhesive resin) and with predominance of corundum Al2O3 over carbon powder C showed the best insulating properties.

Investigation of the thermal protection ablative properties of thermosetting composites with powder fillers: the corundum Al2O3 and the Carbon Powder C

University of Technology and Humanities in Radom, Faculty of Mechanical Engineering, Krasickiego 54B Street, 26–600 Radom

Polish Air Force Academy, Faculty of Airframe and Engine, Dywizjonu 303, No 12 Street, 08–521 Dęblin

Polish Journal of Chemical Technology

Investigation of the thermal protection ablative properties of thermosetting composites with powder fillers: the corundum AlO and the Carbon Powder C

Phenol formaldehyde resins were filled with mixtures of corundum Al2O3 and carbon C powders to produce thermoprotective composites. The composites were treated...

Investigation of the thermal protection ablative properties of thermosetting composites with powder fillers: the corundum Al₂O₃ and the Carbon Powder C

Online veröffentlicht: 31. Dez. 2013

Seitenbereich: 49 - 53

DOI: https://doi.org/10.2478/pjct-2013-0067

This content is open access.