<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Air-entraining agents (AEA) are normally used to improve the frost resistance of concrete. However, it is not possible to accurately control the air void system in concrete with AEA. Thus, a significant loss of concrete strength is caused by over-dosing voids, and this increases the environmental impact from concrete structures. Superabsorbent polymer (SAP) can also be used to produce frost-resistant concrete. Compared to AEA, it can be used to precisely engineer the air void structure of concrete, promote cement hydration, and mitigate self-desiccation cracks. In this study, life cycle assessment methodology is applied to evaluate the overall environmental impact of frost-resistant concrete based on AEA and SAP, respectively. The results illustrate that frost-resistant concrete with SAP has a lower environmental impact than frost-resistant concrete with AEA if the strength and durability of concrete are considered in the defined functional unit. In addition, frost-resistant concrete with SAP reduces the environmental burdens of the vertical elements such as columns, but it increases the environmental load of the horizontal elements such as slabs, where the strength increase cannot be utilized. Moreover, the inventory data for AEA and SAP can affect the impact assessment results.</p></abstract>

Air-entraining agents (AEA) are normally used to improve the frost resistance of concrete. However, it is not possible to accurately control the air void system in concrete with AEA. Thus, a significant loss of concrete strength is caused by over-dosing voids, and this increases the environmental impact from concrete structures. Superabsorbent polymer (SAP) can also be used to produce frost-resistant concrete. Compared to AEA, it can be used to precisely engineer the air void structure of concrete, promote cement hydration, and mitigate self-desiccation cracks. In this study, life cycle assessment methodology is applied to evaluate the overall environmental impact of frost-resistant concrete based on AEA and SAP, respectively. The results illustrate that frost-resistant concrete with SAP has a lower environmental impact than frost-resistant concrete with AEA if the strength and durability of concrete are considered in the defined functional unit. In addition, frost-resistant concrete with SAP reduces the environmental burdens of the vertical elements such as columns, but it increases the environmental load of the horizontal elements such as slabs, where the strength increase cannot be utilized. Moreover, the inventory data for AEA and SAP can affect the impact assessment results.

Environmental Assessment of Frost-resistant Concrete with Superabsorbent Polymers

Nordic Concrete Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Air-entraining agents (AEA) are normally used to improve the frost resistance of concrete. However, it is not possible to accurately control the air void...

Environmental Assessment of Frost-resistant Concrete with Superabsorbent Polymers

Online veröffentlicht: 31. Dez. 2020

Seitenbereich: 43 - 62

Eingereicht: 26. Aug. 2020

Akzeptiert: 21. Dez. 2020

DOI: https://doi.org/10.2478/ncr-2020-0011

Schlüsselwörter
Frost-resistant concrete, air voids, compressive strength, environmental impact, superabsorbent polymers, life cycle assessment

© 2020 Gui Li et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Environmental Assessment of Frost-resistant Concrete with Superabsorbent Polymers

Online veröffentlicht: 31. Dez. 2020

Seitenbereich: 43 - 62

Eingereicht: 26. Aug. 2020

Akzeptiert: 21. Dez. 2020

DOI: https://doi.org/10.2478/ncr-2020-0011

SchlüsselwörterFrost-resistant concrete, air voids, compressive strength, environmental impact, superabsorbent polymers, life cycle assessment

© 2020 Gui Li et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
Frost-resistant concrete, air voids, compressive strength, environmental impact, superabsorbent polymers, life cycle assessment