<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The paper deals with a scientific approach for an increase of accuracy of measurement and possibilities for automation of the standard equipment for calibration and verification of float level gauges. They are applied in high-capacity fuel storage tanks, and they are intended to measure the level of stored liquid hydrocarbons. In the submitted paper, we describe original approaches towards metrological control of float level gauges. Firstly, we present and describe the current ways of control by means of the standard equipment of the first generation with a precision caliper and manual measuring wire with the application of modern scientific and developing processes. A new system, whose design is based on research and development, represents a fully automated measuring system which utilizes the incremental optical encoder with a precision graduated ring and a rewind pulley. The paper deals with the issue of a design of the standard equipment and its measurement system from the standpoint of metrology and construction. Based on scientific procedures, we solve reasons of errors in measurement and their reduction on concrete components of the measurement system. The result is that, following the scientific approach and mathematical description of the determination of measurement uncertainties, constructors are able to design suitable tolerances for the production of components of measuring devices and related materials and technologies.</p></abstract>

The paper deals with a scientific approach for an increase of accuracy of measurement and possibilities for automation of the standard equipment for calibration and verification of float level gauges. They are applied in high-capacity fuel storage tanks, and they are intended to measure the level of stored liquid hydrocarbons. In the submitted paper, we describe original approaches towards metrological control of float level gauges. Firstly, we present and describe the current ways of control by means of the standard equipment of the first generation with a precision caliper and manual measuring wire with the application of modern scientific and developing processes. A new system, whose design is based on research and development, represents a fully automated measuring system which utilizes the incremental optical encoder with a precision graduated ring and a rewind pulley. The paper deals with the issue of a design of the standard equipment and its measurement system from the standpoint of metrology and construction. Based on scientific procedures, we solve reasons of errors in measurement and their reduction on concrete components of the measurement system. The result is that, following the scientific approach and mathematical description of the determination of measurement uncertainties, constructors are able to design suitable tolerances for the production of components of measuring devices and related materials and technologies.

Application of Metrological Approaches in the Design of Calibration Equipment for Verification of Float Level Gauges

Department of Design and Machine Elements, Faculty of Mechanical Engineering, University of Žilina

Slovak Technical University of Bratislava

Department of Automation, Measurement and Applied informatics, Faculty of Mechanical Engineering

Measurement Science Review

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The paper deals with a scientific approach for an increase of accuracy of measurement and possibilities for automation of the standard equipment for...

Application of Metrological Approaches in the Design of Calibration Equipment for Verification of Float Level Gauges

Online veröffentlicht: 29. Okt. 2020

Seitenbereich: 230 - 235

Eingereicht: 13. Juli 2020

Akzeptiert: 12. Okt. 2020

DOI: https://doi.org/10.2478/msr-2020-0028

Schlüsselwörter
Calibration, verification, accuracy of measurement, precision of measurement, production tolerances, float level gauge, incremental optical encoder

© 2020 Ľuboš Kučera et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Application of Metrological Approaches in the Design of Calibration Equipment for Verification of Float Level Gauges

Online veröffentlicht: 29. Okt. 2020

Seitenbereich: 230 - 235

Eingereicht: 13. Juli 2020

Akzeptiert: 12. Okt. 2020

DOI: https://doi.org/10.2478/msr-2020-0028

SchlüsselwörterCalibration, verification, accuracy of measurement, precision of measurement, production tolerances, float level gauge, incremental optical encoder

© 2020 Ľuboš Kučera et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
Calibration, verification, accuracy of measurement, precision of measurement, production tolerances, float level gauge, incremental optical encoder