Restoration of the Impact Crusher Rotor Using FCAW with High-Manganese Steel Reinforced by Complex Carbides

[1] Z. Zhang, T. Ren, J. Cheng and J. Zhu. “An Improved Capacity Model of the Cone Crushers Based on the Motion Characteristics of Particles Considering the Influence of the Spatial Compound Motion of the Mantle.” Minerals, vol. 12, art. no. 235, 2022. https://doi.org/10.3390/min12020235 Search in Google Scholar

[2] S. Wu, S. Wang, G. Wang, L. Fan, J. Guo, Z. Liu, H. Zhang, W. Guan, Y. Wang and Y. Wu. “Study on productivity of eccentric roll crusher based on theory and experiment.” Minerals Engineering, vol. 206, art. no. 108500, 2024. https://doi.org/10.1016/j.mineng.2023.108500 Search in Google Scholar

[3] M. Bembenek and P. Wdaniec. “Effect of crusher type and its parameters on the dry granulation of powders [Wpływ rodzaju kruszarki oraz parametrów jej pracy na suchą granulację proszków].” Przemysl Chemiczny, vol. 98, pp. 310-313, 2019. https://doi.org/10.15199/62.2019.2.25 Search in Google Scholar

[4] R. Haigh. “A Decade Review of Research Trends Using Waste Materials in the Building and Construction Industry: A Pathway towards a Circular Economy.” Waste, vol. 1, pp. 935-959, 2023. https://doi.org/10.3390/waste1040054 Search in Google Scholar

[5] S. Kurnosov, L. Ropyak, A. Velychkovych, T. Pryhorovska and V. Vytvytskyi. “Mechanical – Insulating Method of Household and Industrial Waste Utilization,” in New Technologies, Development and Application IV. NT 2021. Lecture Notes in Networks and Systems, vol. 233. I. Karabegović, Ed. Cham: Springer, 2021, pp. 431-441. https://doi.org/10.1007/978-3-030-75275-0_48 Search in Google Scholar

[6] M. Korchemlyuk and L. Arkhypova. “Environmental Audit of Ukrainian Basin Ecosystem of the Prut River.” Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, vol. 2016, pp. 97-106, 2016. Search in Google Scholar

[7] W. Bialy, W. Grebski, G. Galecki and W. Kaniak. “Environmental impact of the mechanical coal processing plant.” Acta Montanistica Slovaca, vol. 25, pp. 139-149, 2020. https://doi.org/10.46544/AMS.v25i2.1 Search in Google Scholar

[8] D. Li, Y. Wang, C. Wang and S. Li “Research on the Wear Behavior of the Fixed Cone Liner of a Cone Crusher Based on the Discrete Element Method.” ACS Omega, vol. 5, art. no. 16, 2020. https://doi.org/10.1021/acsomega.0c01272 Search in Google Scholar

[9] Z. Zhang, T. Ren and J. Cheng. “Constant Wear Criterion for Optimization of the Crushing Chamber of Cone Crushers.” Minerals, vol. 12, art. no. 807, 2022. https://doi.org/10.3390/min12070807 Search in Google Scholar

[10] H.M. Nykyforchyn, O.T. Tsyrul’nyk, D.Yu. Petryna, and M.I. Hredil’. “Degradation of steels used in gas main pipelines during their 40-year operation.” Strength of Materials, vol. 41, pp. 501-505, 2009. https://doi.org/10.1007/s11223-009-9158-8 Search in Google Scholar

[11] Z.M. Rykavets, J. Bouquerel, J.-B. Vogt, Z.A. Duriagina, V.V. Kulyk, T.L. Tepla, L.I. Bohun and T.M. Kovbasyuk. “Investigation of the microstructure and properties of trip 800 steel subjected to low-cycle fatigue.” Progress in Physics of Metals, vol. 20, pp. 620-633, 2019. https://doi.org/10.15407/ufm.20.04.620 Search in Google Scholar

[12] L. Ropyak, I. Shatskyi and M. Makoviichuk. “Influence of the oxide-layer thickness on the ceramic-aluminium coating resistance to indentation.” Metallofizika i Noveishie Tekhnologii, vol. 39, pp. 517-524, 2017. https://doi.org/10.15407/mfint.39.04.0517 Search in Google Scholar

[13] I.P. Shatskyi, L.Y. Ropyak and M.V. Makoviichuk. “Strength optimization of a two-layer coating for the particular local loading conditions.” Strength of Materials, vol. 48, pp. 726-730, 2016. https://doi.org/10.1007/s11223-016-9817-5 Search in Google Scholar

[14] L. Ropyak, T. Shihab, A. Velychkovych, O. Dubei, T. Tutko and V. Bilinskyi. “Design of a Two-Layer Al–Al₂O₃ Coating with an Oxide Layer Formed by the Plasma Electrolytic Oxidation of Al for the Corrosion and Wear Protections of Steel.” Progress in Physics of Metals, vol. 24, pp. 319-365, 2023. https://doi.org/10.15407/ufm.24.02.319 Search in Google Scholar

[15] L. Ropyak, I. Shatskyi and M. Makoviichuk. “Analysis of interaction of thin coating with an abrasive using onedimensional model.” Metallofizika i Noveishie Tekhnologii, vol. 41, pp. 647-654, 2019. https://doi.org/10.15407/mfint.41.05.0647 Search in Google Scholar

[16] I.P. Shats’kyi. “Limiting equilibrium of a plate with partially healed crack.” Materials Science, vol. 51, pp. 322-330, 2015. https://doi.org/10.1007/s11003-015-9845-5 Search in Google Scholar

[17] I.P. Shatskyi, V.V. Perepichka and L.Y. Ropyak. “On the influence of facing on strength of solids with surface defects.” Metallofizika i Noveishie Tekhnologii, vol. 42, pp. 69-76, 2020. https://doi.org/10.15407/mfint.42.01.0069 Search in Google Scholar

[18] T.M. Dalyak and I.P. Shatsky. “On brittle fracture of a body with partial healed star-shaped crack.” Bulletin of Taras Shevchenko National University of Kyiv. Physical and Mathematical Sciences, vol. 2023, pp. 100-103, 2023. https://doi.org/10.17721/1812-5409.2023/2.13 Search in Google Scholar

[19] I.P. Shatskyi, M.V. Makoviichuk and A.B. Shcherbii. “Equilibrium of Cracked Shell with Flexible Coating,” in Shell Structures: Theory and Applications – Proceedings of the 11th International Conference on Shell Structures: Theory and Applications, SSTA 2017, Gdansk, Poland, vol. 4. W. Pietraszkiewicz, W. Witkowski, Ed. London: CRC Press, 2017, pp. 165-168. https://doi.org/10.1201/9781315166605-34 Search in Google Scholar

[20] M. Dutkiewicz, T. Dalyak, I. Shatskyi, T. Venhrynyuk and A. Velychkovych. “Stress Analysis in Damaged Pipeline with Composite Coating.” Appl. Sci., vol. 11, art. no. 10676, 2021. https://doi.org/10.3390/app112210676 Search in Google Scholar

[21] I. Shatskyi, M. Makoviichuk, L. Ropyak and A. Velychkovych. “Analytical model of deformation of a functionally graded ceramic coating under local load.” Ceramics, vol. 46, pp. 1879-1893, 2023. https://doi.org/10.3390/ceramics6030115 Search in Google Scholar

[22] V. Martsinkovsky, V. Yurko, V. Tarelnik and Y. Filonenko. “Designing radial sliding bearing equipped with hydrostatically suspended pads.” Procedia Engineering, vol. 39, pp. 157-167, 2012. https://doi.org/10.1016/j.proeng.2012.07.020 Search in Google Scholar

[23] V. Kotsyubynsky, L. Shyyko, T. Shihab, P. Prysyazhnyuk, V. Aulin and V. Boichuk. “Multilayered MoS₂/C nanospheres as high performance additives to lubricating oils.” Materials Today: Proceedings, vol. 35, pp. 538-541, 2019. https://doi.org/10.1016/j.matpr.2019.10.021 Search in Google Scholar

[24] O.P. Gaponova, B. Antoszewski, V.B. Tarelnyk, P. Kurp, O.M. Myslyvchenko and N.V. Tarelnyk. “Analysis of the quality of sulfomolybdenum coatings obtained by electrospark alloying methods.” Materials, vol. 14, art. no. 6332, 2021. https://doi.org/10.3390/ma14216332 Search in Google Scholar

[25] V. Martsynkovskyy, V. Tarelnyk, I. Konoplianchenko, O. Gaponova and M. Dumanchuk. “Technology Support for Protecting Contacting Surfaces of Half-Coupling – Shaft Press Joints Against Fretting Wear,” in Advances in Design, Simulation and Manufacturing II. DSMIE 2019. Lecture Notes in Mechanical Engineering, V. Ivanov, et al. Ed. Cham: Springer, 2020, pp. 216-225. https://doi.org/10.1007/978-3-030-22365-6_22 Search in Google Scholar

[26] Y. Kusyi, O. Onysko, A. Kuk, B. Solohub and V. Kopei. “Development of the Technique for Designing Rational Routes of the Functional Surfaces Processing of Products,” in New Technologies, Development and Application V. NT 2022. Lecture Notes in Networks and Systems, vol 472. I. Karabegović, A. Kovačević, S. Mandžuka, Ed. Cham: Springer, 2022, pp. 135-143. https://doi.org/10.1007/978-3-031-05230-9_16 Search in Google Scholar

[27] A. Permyakov, S. Dobrotvorskiy, L. Dobrovolska, Y. Basova and M. Ivanova. “Computer Modeling Application for Predicting of the Passing of the High-Speed Milling Machining Hardened Steel,” in Advances in Design, Simulation and Manufacturing. DSMIE 2019. Lecture Notes in Mechanical Engineering, V. Ivanov, et al. Ed. Cham: Springer, 2019, pp. 135-145. https://doi.org/10.1007/978-3-319-93587-4_15 Search in Google Scholar

[28] Y. Danylchenko, M. Storchak, M. Danylchenko and A. Petryshyn. “Cutting Process Consideration in Dynamic Models of Machine Tool Spindle Units.” Machines, vol. 11, art. no. 582, 2023. https://doi.org/10.3390/machines11060582 Search in Google Scholar

[29] I. Yakovenko, A. Permyakov, M. Ivanova, Y. Basova and D. Shepeliev. “Lifecycle Management of Modular Machine Tools,” in Advanced Manufacturing Processes III. InterPartner 2021. Lecture Notes in Mechanical Engineering, V. Tonkonogyi, V. Ivanov, J. Trojanowska, G. Oborskyi, I. Pavlenko, Ed. Cham: Springer, 2022, pp. 127-137. https://doi.org/10.1007/978-3-030-91327-4_13 Search in Google Scholar

[30] T. Pryhorovska and L. Ropyak. “Machining Error Influnce on Stress State of Conical Thread Joint Details,” in Proceedings of the International Conference on Advanced Optoelectronics and Lasers, CAOL, 2019-September, art. no. 9019544, pp. 493-497, 2019. https://doi.org/10.1109/CAOL46282.2019.9019544 Search in Google Scholar

[31] V.B. Kopei, O.R. Onysko and V.G. Panchuk. “Computerized system based on FreeCAD for geometric simulation of the oil and gas equipment thread turning.” In International Conference on Applied Sciences (ICAS), vol. 477, art. no. 012032, 2019. https://doi.org/10.1088/1757-899X/477/1/012032 Search in Google Scholar

[32] K.S. Barandych, S.P. Vysloukh and V.S. Antonyuk. “Ensuring Fatigue Life of Parts During Finish Turning with Cubic Boron Nitride Tools.” Journal of Superhard Materials, vol. 40, pp. 206-215, 2018. https://doi.org/10.3103/S1063457618030085 Search in Google Scholar

[33] V. Lozynskyi, T. Shihab, I. Drach and L. Ropyak. “The Inertial Disturbances of Fluid Movement in the Chamber of a Liquid Autobalancer.” Machines, vol. 12, art. no. 39, 2024. https://doi.org/10.3390/machines12010039 Search in Google Scholar

[34] I. Drach, V. Royzman, A. Bubulis and K. Juzėnas. “Passive balancing of the rotor with an auto-balancing device with a viscous incompressible liquid.” Mechanika, vol. 27, pp. 45-51, 2021. https://doi.org/10.5755/J02.MECH.23789 Search in Google Scholar

[35] M. Gnuffi, D. Pighin and N. Sakamoto. “Rotor imbalance suppression by optimal control.” Optim Control Appl Meth., vol. 43, pp. 213-242, 2022. https://doi.org/10.1002/oca.2780 Search in Google Scholar

[36] A.I. Bandura. “Some improvements of criteria of L-index boundedness in direction.” Matematychni Studii, vol. 47, pp. 27-32, 2017. https://doi.org/10.15330/ms.47.1.27-32 Search in Google Scholar

[37] A.I. Bandura. “Composition of entire functions and bounded L-index in direction.” Matematychni Studii, vol. 47, pp. 179-184, 2017. https://doi.org/10.15330/ms.47.2.179-184 Search in Google Scholar

[38] I. Chudyk, P. Raiter, Ya. Grydzhuk and L. Yurych. “Mathematical model of oscillations of a drill tool with a drill bit of cutting-scraping type.” Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, vol. 2020, pp. 52-57, 2020. https://doi.org/10.33271/nvngu/2020-1/052 Search in Google Scholar

[39] Y. Gong, L. Ren, X. Han, A. Gao, S. Jing, C. Feng and Y. Song. “Analysis of operating conditions for vibration of a self-propelled monorail branch chipper.” Agriculture, vol. 13, art. no. 101, 2023. https://doi.org/10.3390/agriculture13010101 Search in Google Scholar

[40] A.I. Bandura. and Y.I. Savchuk. “Structure of the set of borel exceptional vectors for entire curves.” Matematychni Studii, vol. 53, pp. 41-47, 2020. https://doi.org/10.30970/ms.53.1.41-47 Search in Google Scholar

[41] Y.I. Savchuk and A.I. Bandura. “Asymptotic vectors of entire curves.” Matematychni Studii, vol. 56, pp. 48–54, 2021. https://doi.org/10.30970/ms.56.1.48-54 Search in Google Scholar

[42] V.F. Navarro Torres, J.R. Figueiredo, R.C. De La Hoz, M. Botaro and L.S. Chaves. ”A Mine-to-Crusher Model to Minimize Costs at a Truckless Open-Pit Iron Mine in Brazil.” Minerals, vol. 12, art. no. 1037, 2022. https://doi.org/10.3390/min12081037 Search in Google Scholar

[43] M. Dutkiewicz, A. Velychkovych, I. Shatskyi and V. Shopa. “Efficient Model of the Interaction of Elastomeric Filler with an Open Shell and a Chrome-Plated Shaft in a Dry Friction Damper.” Materials, vol. 15, art. no. 4671, 2022. https://doi.org/10.3390/ma15134671 Search in Google Scholar

[44] A. Velychkovych, I. Petryk and L. Ropyak. “Analytical study of operational properties of a plate shock absorber of a sucker-rod string.” Shock and Vibration, vol. 2020, art. no. 3292713, 2020. https://doi.org/10.1155/2020/3292713 Search in Google Scholar

[45] K. Midor. “Innovation in coal mining management as an intelligent specialization.” Production Engineering Archives, vol. 15, pp. 41-44, 2017. https://doi.org/10.30657/pea.2017.15.10 Search in Google Scholar

[46] M. Zasadzień and J. Zarnovský. “Improvement of Selected Logistics Processes Using Quality Engineering Tools.” Management Systems in Production Engineering, vol. 26, pp. 55-59, 2018. https://doi.org/10.2478/mspe-2018-0009 Search in Google Scholar

[47] S.K. Gupta and J. Rosak-Szyrocka. “Quality and Value Management in Education in the Digitalization Era,” in Quality Management, Value Creation, and the Digital Economy, 1^nd ed., J. Rosak-Szyrocka, J. Żywiołek M. Shahbaz, Ed. London: Routledge, 2023, pp. 167-180. https://doi.org/10.4324/9781003404682-11 Search in Google Scholar

[48] W. Biały, and J. Fries. “Computer systems supporting the management of machines/equipment in hard coal mines. case study.” Management Systems in Production Engineering, vol. 27, pp. 138-143, 2019. https://doi.org/10.1515/mspe-2019-0022 Search in Google Scholar

[49] M. Bembenek, J. Krawczyk and K. Pańcikiewicz. “The wear mechanism of mill beaters for coal grinding made-up from high manganese cast steel.” Engineering Failure Analysis, vol. 142, art. no. 106843, 2022. https://doi.org/10.1016/j.engfailanal.2022.106843 Search in Google Scholar

[50] K.A. Abuhasel. “Machine learning approach to handle data-driven model for simulation and forecasting of the cone crusher output in the stone crushing plant.” Computational Intelligence, vol. 37, pp. 1098-1110, 2021. https://doi.org/10.1111/coin.12338 Search in Google Scholar

[51] B. Gajdzik. “Autonomous and professional maintenance in metallurgical enterprise as activities within total productive maintenance.” Metalurgija, vol. 53, pp. 269-272, 2014. Search in Google Scholar

[52] L.B. Varela, G. Tressia, M. Masoumi, E.M. Bortoleto, C. Regattieri and A. Sinatora. “Roller crushers in iron mining, how does the degradation of Hadfield steel components occur?.” Engineering Failure Analysis, vol. 122, art. no. 105295, 2021. https://doi.org/10.1016/j.engfailanal.2021.105295 Search in Google Scholar

[53] L. Ropyak, T. Shihab, A. Velychkovych, V. Bilinskyi, V. Malinin and M. Romaniv. “Optimization of Plasma Electrolytic Oxidation Technological Parameters of Deformed Aluminum Alloy D16T in Flowing Electrolyte.” Ceramics, vol. 6, pp. 146-167, 2023. https://doi.org/10.3390/ceramics6010010 Search in Google Scholar

[54] M. Bembenek, P. Prysyazhnyuk, T. Shihab, R. Machnik, O. Ivanov and L. Ropyak. “Microstructure and Wear Characterization of the Fe-Mo-B-C – Based Hardfacing Alloys Deposited by Flux-Cored Arc Welding.” Materials, vol. 15, art. no. 5074, 2022. https://doi.org/10.3390/ma15145074 Search in Google Scholar

[55] B. Gajdzik. “Post-Pandemic Steel Production Scenarios for Poland Based on Forecasts of Annual Steel Production Volume.” Management Systems in Production Engineering, vol. 31, pp. 172-190, 2023. https://doi.org/10.2478/mspe-2023-0019 Search in Google Scholar

[56] L. Ropyak, I. Schuliar and O. Bohachenko. “Influence of technological parameters of centrifugal reinforcement upon quality indicators of parts.” Eastern-European Journal of Enterprise Technologies, vol. 1, pp. 53-62, 2016. https://doi.org/10.15587/1729-4061.2016.59850 Search in Google Scholar

[57] USGS. Available at: http://www.bjohnsonsworld.co.uk/theriseoftheubermensch (Accessed: 10 May 2024). Search in Google Scholar

[58] T. Shihab, P. Prysyazhnyuk, I. Semyanyk, R. Anrusyshyn, O. Ivanov and L. Troshchuk. “Thermodynamic Approach to the Development and Selection of Hardfacing Materials in Energy Industry.” Management Systems in Production Engineering, vol. 28, pp. 84-89, 2020. https://doi.org/10.2478/mspe-2020-0013 Search in Google Scholar

[59] P. Prysyazhnyuk and D. Di Tommaso. “The thermodynamic and mechanical properties of Earth-abundant metal ternary boride Mo₂(Fe,Mn)B₂ solid solutions for impact and wear-resistant alloys.” Materials Advances, vol. 4, pp. 3822-3838, 2023. https://doi.org/10.1039/d3ma00313b Search in Google Scholar

[60] K.H. Levchuk, T.M. Radchenko and V.A. Tatarenko. “High-temperature entropy effects in the tetragonality of the ordering interstitial-substitutional solution based on the body-centred tetragonal metal.” Metallofizika i Noveishie Tekhnologii, vol. 43, pp. 1-26, 2021. https://doi.org/10.15407/mfint.43.01.0001 Search in Google Scholar

[61] V. Lozynskyi, B. Trembach, M.M. Hossain, M.H. Kabir, Y. Silchenko, M. Krbata, K. Sadovyi, O. Kolomiitse and L. Ropyak. “Prediction of phase composition and mechanical properties Fe-Cr-C-B-Ti-Cu hardfacing alloys: Modeling and experimental Validations.” Heliyon, vol. 10, art. no. e25199, 2024. https://doi.org/10.1016/j.heliyon.2024.e25199 Search in Google Scholar

[62] B.O. Trembach, D.V. Hlushkova, V.M. Hvozdetskyi, V.A. Vynar, V.I. Zakiev, O.V. Kabatskyi, D.V. Savenok and O.Y Zakavorotnyi. “Prediction of Fill Factor and Charge Density of Self-Shielding Flux-Cored Wire with Variable Composition.” Materials Science, vol. 59, pp. 18-25, 2023. https://doi.org/10.1007/s11003-023-00738-7 Search in Google Scholar

[63] V. Lozynskyi, B. Trembach, E. Katinas, K. Sadovyi, M. Krbata, O. Balenko, I. Krasnoshapka, O. Rebrova, S. Knyazev, O. Kabatskyi, H. Kniazieva and L. Ropyak. “Effect of Exothermic Additions in Core Filler on Arc Stability and Microstructure during Self-Shielded, Flux-Cored Arc Welding.” Crystals, vol. 14, art. no. 335, 2024. https://doi.org/10.3390/cryst14040335 Search in Google Scholar

[64] Ł. Szymański, E. Olejnik, J.J. Sobczak, M. Szala, P. Kurtyka, T. Tokarski, A. Janas. “Dry sliding, slurry abrasion and cavitation erosion of composite layers reinforced by TiC fabricated in situ in cast steel and gray cast iron.” Journal of Materials Processing Technology, vol. 308, art. no. 117688, 2022. https://doi.org/10.1016/j.jmatprotec.2022.117688 Search in Google Scholar

[65] M. Szala, M. Walczak, T. Hejwowski. “Factors Influencing Cavitation Erosion of NiCrSiB Hardfacings Deposited by Oxy-Acetylene Powder Welding on Grey Cast Iron.” Advances in Science and Technology Research Journal, vol. 15, pp. 376-386, 2021. https://doi.org/10.12913/22998624/143304 Search in Google Scholar

[66] E.F. Pereplotchikov, K.B. Vasyliv, V.A. Vynar, I.O. Ryabtsev and V.I. Zakiev. “Elevation of the Wear Resistance of Low-Alloy Structural Steel by Plasma-Powder Surfacing with Alloys Based on Iron, Chromium, and Nickel.” Materials Science, vol. 54, pp. 378-386, 2018. https://doi.org/10.1007/s11003-018-0195-y Search in Google Scholar

[67] P. Prysyazhnyuk, O. Ivanov, O. Matvienkiv, S. Marynenko, O. Korol and I. Koval. “Impact and abrasion wear resistance of the hardfacings based on high-manganese steel reinforced with multicomponent carbides of Ti-Nb-Mo-V-C system.” Procedia Structural Integrity, vol. 36, pp. 130-136, 2022. https://doi.org/10.1016/j.prostr.2022.01.014 Search in Google Scholar

[68] S. Ge, Q. Wang and J. Wang. “The impact wear-resistance enhancement mechanism of medium manganese steel and its applications in mining machines.” Wear, vol. 376-377, Part B, pp. 1097-1104, 2017. https://doi.org/10.1016/j.wear.2017.01.015 Search in Google Scholar

[69] P. Prysyazhnyuk, M. Molenda, T. Romanyshyn, L. Ropyak, L. Romanyshyn and V. Vytvytskyi. “Development of a hardbanding material for drill pipes based on high-manganese steel reinforced with complex carbides.” Acta Montanistica Slovaca, vol. 27, pp. 685-696, 2022. https://doi.org/10.46544/AMS.v27i3.09 Search in Google Scholar

[70] A.S. Yamashita, A. Thivierge, and T. Euzebio. “A review of modeling and control strategies for cone crushers in the mineral processing and quarrying industries.” Minerals Engineering, vol. 170, art. no. 107036, 2021. https://doi.org/10.1016/j.mineng.2021.107036 Search in Google Scholar

[71] PULVOMATIC ebroacero. Available at: https://www.pulvomatic.com/en/home (Accessed: 10 May 2024). Search in Google Scholar