<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Losses of drilling mud and other fluids is the one of the major types of drilling troubles. Annual time losses for their elimination by oil and gas companies are huge. The factors, influencing the mud losses and regulating the direction of the further works, can be divided into two groups: geological and technological. Conducted studies on the use of an insulating composition based on chromium acetate made it possible to identify: the use of the insulation composition on the chrome acetate base allows considerable reduction of time required to eliminate disastrous circulation loss without installation of cement plugs; avoiding BHA replacement; avoiding drilling-in after bullheading and overlapping of lost-circulation layer; low cost, possibility of fast preparation, as it does not entail the delivery of additional chemicals, which also contributes to reduction of time required to eliminate disastrous circulation loss; the use with every type of drilling mud. Basing on the positive experience of the use of this composition in the neighboring regions and considering its economic side, the technique can be used in regions of the Udmurt Republic.</p></abstract>

Losses of drilling mud and other fluids is the one of the major types of drilling troubles. Annual time losses for their elimination by oil and gas companies are huge. The factors, influencing the mud losses and regulating the direction of the further works, can be divided into two groups: geological and technological. Conducted studies on the use of an insulating composition based on chromium acetate made it possible to identify: the use of the insulation composition on the chrome acetate base allows considerable reduction of time required to eliminate disastrous circulation loss without installation of cement plugs; avoiding BHA replacement; avoiding drilling-in after bullheading and overlapping of lost-circulation layer; low cost, possibility of fast preparation, as it does not entail the delivery of additional chemicals, which also contributes to reduction of time required to eliminate disastrous circulation loss; the use with every type of drilling mud. Basing on the positive experience of the use of this composition in the neighboring regions and considering its economic side, the technique can be used in regions of the Udmurt Republic.

Modern Methods of Elimination of Lost Circulation in Directional Wells

Management Systems in Production Engineering

This work is licensed under the Creative Commons Attribution 4.0 International License.

{"article-title":"Modern Methods of Elimination of Lost Circulation in Directional Wells"}

Losses of drilling mud and other fluids is the one of the major types of drilling troubles. Annual time losses for their elimination by oil and gas companies...

Modern Methods of Elimination of Lost Circulation in Directional Wells

Online veröffentlicht: 02. Dez. 2020

Seitenbereich: 65 - 74

Eingereicht: 01. Aug. 2020

Akzeptiert: 01. Okt. 2020

DOI: https://doi.org/10.2478/mspe-2021-0009

Schlüsselwörter
liquidation of acquisitions, drilling tool run-in-hole/put-out-of-hole, restoration of circulation, drilling process, lowering or cementing of the production casing

© 2021 Tatiana N. Ivanova et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Modern Methods of Elimination of Lost Circulation in Directional Wells

Online veröffentlicht: 02. Dez. 2020

Seitenbereich: 65 - 74

Eingereicht: 01. Aug. 2020

Akzeptiert: 01. Okt. 2020

DOI: https://doi.org/10.2478/mspe-2021-0009

Schlüsselwörterliquidation of acquisitions, drilling tool run-in-hole/put-out-of-hole, restoration of circulation, drilling process, lowering or cementing of the production casing

© 2021 Tatiana N. Ivanova et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Schlüsselwörter
liquidation of acquisitions, drilling tool run-in-hole/put-out-of-hole, restoration of circulation, drilling process, lowering or cementing of the production casing