<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The paper focuses on measuring and evaluating the impact of selected technical and technological factors -the height of adjustable guides and stretching force - on the side deflection of the saw band of a joinery band saw. There is a detailed description of the ways the side deflection can be measured. In order to find out the intensity of the stretching force was used portable tension meter SANDVIK 5000, enabling to check the tensile stress in the saw blades of a gang saw or in the saw bands of a band saw. The actual experiment was conducted on a joinery band saw, at the cutting rate vc = 15 m·s-1. The results of the measurements confirmed the theoretical assumption of the impact of the selected technical and technological factors on the stability of the saw band, where the side deflection decreases with increasing stretching force and increases with increasing height of the guides. The stability of the saw band affects the quality of the surface to be treated, thus saving the cost of machining the workpiece and making work productivity more efficient.</p></abstract>

The paper focuses on measuring and evaluating the impact of selected technical and technological factors -the height of adjustable guides and stretching force - on the side deflection of the saw band of a joinery band saw. There is a detailed description of the ways the side deflection can be measured. In order to find out the intensity of the stretching force was used portable tension meter SANDVIK 5000, enabling to check the tensile stress in the saw blades of a gang saw or in the saw bands of a band saw. The actual experiment was conducted on a joinery band saw, at the cutting rate vc = 15 m·s-1. The results of the measurements confirmed the theoretical assumption of the impact of the selected technical and technological factors on the stability of the saw band, where the side deflection decreases with increasing stretching force and increases with increasing height of the guides. The stability of the saw band affects the quality of the surface to be treated, thus saving the cost of machining the workpiece and making work productivity more efficient.

Research on the Side Deflection of the Saw Band of a Joinery Band Saw Influenced by the Selected Technical and Technological Factors

Management Systems in Production Engineering

This work is licensed under the Creative Commons Attribution 4.0 Public License.

The paper focuses on measuring and evaluating the impact of selected technical and technological factors -the height of adjustable guides and stretching force...

Research on the Side Deflection of the Saw Band of a Joinery Band Saw Influenced by the Selected Technical and Technological Factors

Online veröffentlicht: 17. Juli 2020

Seitenbereich: 148 - 153

Eingereicht: 01. Jan. 2020

Akzeptiert: 01. Juni 2020

DOI: https://doi.org/10.2478/mspe-2020-0022

Schlüsselwörter
band saw, saw band, stability, side deflection

© 2020 Jozef Krilek et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 Public License.

Research on the Side Deflection of the Saw Band of a Joinery Band Saw Influenced by the Selected Technical and Technological Factors

Online veröffentlicht: 17. Juli 2020

Seitenbereich: 148 - 153

Eingereicht: 01. Jan. 2020

Akzeptiert: 01. Juni 2020

DOI: https://doi.org/10.2478/mspe-2020-0022

Schlüsselwörterband saw, saw band, stability, side deflection

© 2020 Jozef Krilek et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 Public License.

Schlüsselwörter
band saw, saw band, stability, side deflection