This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Silva TEF, Rosa PAR, Reis AR, de Jesus AMP. Machinability of the 18Ni300 additively manufactured maraging steel based on orthogonal cutting tests. In: Machado J, Soares F, Trojanowska J, Ottaviano E, editors. Innovations in mechanical engineering. Part of: Lect. Notes Mech. Eng. Singapore: Springer, 2022. doi: 10.1007/978-3-030-79165-0_1SilvaTEFRosaPARReisARde JesusAMP.Machinability of the 18Ni300 additively manufactured maraging steel based on orthogonal cutting tests. In: MachadoJSoaresFTrojanowskaJOttavianoE, editors. Innovations in mechanical engineering. Part of: Lect. Notes Mech. Eng. Singapore: Springer, 2022. doi: 10.1007/978-3-030-79165-0_1Open DOISearch in Google Scholar
Yang Z, Hao H, Gao Q, et al. Strengthening mechanism and high-temperature properties of H13+ WC/Y2O3 laser-cladding coatings. Surf Coat Technol. 2021;405:126544. doi: 10.1016/j.surfcoat.2020.126544YangZHaoHGaoQ, Strengthening mechanism and high-temperature properties of H13+ WC/Y2O3 laser-cladding coatings. Surf Coat Technol. 2021;405:126544. doi: 10.1016/j.surfcoat.2020.126544Open DOISearch in Google Scholar
Jiang Z, Sun J, Berto F, Wang X, et al. Fatigue and fracture behavior of AlSi10Mg manufactured by selective laser melting: a review. Phys Mesomech. 2023;26:367–90. doi: 10.1134/S102995992304001XJiangZSunJBertoFWangX, Fatigue and fracture behavior of AlSi10Mg manufactured by selective laser melting: a review. Phys Mesomech. 2023;26:367–90. doi: 10.1134/S102995992304001XOpen DOISearch in Google Scholar
Wall A, Benoit JM. A review of existing solidification crack tests and analysis of their transferability to additive manufacturing. J Mater Process Technol. 2023;320:118090. doi: 10.1016/j.jmatprotec.2023.118090WallABenoitJM.A review of existing solidification crack tests and analysis of their transferability to additive manufacturing. J Mater Process Technol. 2023;320:118090. doi: 10.1016/j.jmatprotec.2023.118090Open DOISearch in Google Scholar
Guiru M, Jingdong Z, Jiachen L, et al. Impact of pore defects on laser additive manufacturing of Inconel 718 alloy based on a novel finite element model: thermal and stress evaluation. Opt Laser Technol. 2023;167:109782. doi: 10.1016/j.optlastec.2023.109782GuiruMJingdongZJiachenL, Impact of pore defects on laser additive manufacturing of Inconel 718 alloy based on a novel finite element model: thermal and stress evaluation. Opt Laser Technol. 2023;167:109782. doi: 10.1016/j.optlastec.2023.109782Open DOISearch in Google Scholar
Zhao Y, Zhang H, Cai J, Sun X, et al. An efficient pores suppression process design method for high strength BCC high entropy alloys via powder bed fusion. J Manuf Process. 2023;101:371–85. doi: 10.1016/j.jmapro.2023.05.097ZhaoYZhangHCaiJSunX, An efficient pores suppression process design method for high strength BCC high entropy alloys via powder bed fusion. J Manuf Process. 2023;101:371–85. doi: 10.1016/j.jmapro.2023.05.097Open DOISearch in Google Scholar
Bibin J, Manikandan M, Arivazhagan N, et al. Current research and developments in welding of 18% nickel maraging steel. Proc Inst Mech Eng Pt L J Mater DesAppl. 2023;237:1295–1318. doi: 10.1177/14644207221142516BibinJManikandanMArivazhaganN, Current research and developments in welding of 18% nickel maraging steel. Proc Inst Mech Eng Pt L J Mater DesAppl. 2023;237:1295–1318. doi: 10.1177/14644207221142516Open DOISearch in Google Scholar
Guo Q, Wang Y, Lin J. Effect of additive and subtractive hybrid manufacturing process on the surface quality of 18Ni300 maraging steel. Mater Res Express. 2023;10:056501. doi: 10.1088/2053-1591/accfe8GuoQWangYLinJ.Effect of additive and subtractive hybrid manufacturing process on the surface quality of 18Ni300 maraging steel. Mater Res Express. 2023;10:056501. doi: 10.1088/2053-1591/accfe8Open DOISearch in Google Scholar
Hong S, Ha S, Song G, Cho J, et al. Correlation between micro-to-macro mechanical properties and processing parameters on additive manufactured 18Ni300 maraging steels. J.Alloys Compd. 2023;960:171031. doi: 10.1016/j.jallcom.2023.171031HongSHaSSongGChoJ, Correlation between micro-to-macro mechanical properties and processing parameters on additive manufactured 18Ni300 maraging steels. J.Alloys Compd. 2023;960:171031. doi: 10.1016/j.jallcom.2023.171031Open DOISearch in Google Scholar
Yan L, Luo Q, He Z, Zhao H. Microstructure and mechanical properties of selective laser melted 18Ni300 steel. Mater Sci-Poland. 2022;40:64–71. doi: 10.2478/msp-2022-0031YanLLuoQHeZZhaoH.Microstructure and mechanical properties of selective laser melted 18Ni300 steel. Mater Sci-Poland. 2022;40:64–71. doi: 10.2478/msp-2022-0031Open DOISearch in Google Scholar
Bai Y, Zhao C, Wang D, Wang H. Evolution mechanism of surface morphology and internal hole defect of 18Ni300 maraging steel fabricated by selective laser melting. J Mater Process Technol. 2022;299:117328. doi: 10.1016/j.jmatprotec.2021.117328BaiYZhaoCWangDWangH.Evolution mechanism of surface morphology and internal hole defect of 18Ni300 maraging steel fabricated by selective laser melting. J Mater Process Technol. 2022;299:117328. doi: 10.1016/j.jmatprotec.2021.117328Open DOISearch in Google Scholar
Mei X, Yan Y, Fu H, Gao X, Huang S, Qiao L. Effect of aging temperature on microstructure evolution and strengthening behavior of L-PBF 18Ni(300) maraging steel. Addit. Manuf. 2022;58:103071. doi: 10.1016/j.addma.2022.103071MeiXYanYFuHGaoXHuangSQiaoL.Effect of aging temperature on microstructure evolution and strengthening behavior of L-PBF 18Ni(300) maraging steel. Addit. Manuf. 2022;58:103071. doi: 10.1016/j.addma.2022.103071Open DOISearch in Google Scholar
Li JN, Gong SL, Liu KG, Qi WJ, Tian J, Shan FH. Formation mechanism and mechanical properties of the selective laser melting Ni/Co base alloy. J Alloys Compd. 2019;777:963–7. doi: 10.1016/j.jallcom. 2018.10.343LiJNGongSLLiuKGQiWJTianJShanFH.Formation mechanism and mechanical properties of the selective laser melting Ni/Co base alloy. J Alloys Compd. 2019;777:963–7. doi: 10.1016/j.jallcom. 2018.10.343Open DOISearch in Google Scholar
Calignano F. Investigation of the accuracy and roughness in the laser powder bed fusion process. Virtual Phys Prototyp. 2018;13:97–104. doi: 10.1080/17452759.2018.1426368CalignanoF.Investigation of the accuracy and roughness in the laser powder bed fusion process. Virtual Phys Prototyp. 2018;13:97–104. doi: 10.1080/17452759.2018.1426368Open DOISearch in Google Scholar
Bozkurt YB, Kavasoglu YS, Atik B, Kovacı H, Uzun Y, Çelik A. Comparison study of corrosion behavior for chitosan coated Ti6Al4V alloy produced by selective laser melting and forging. Progr Org Coat. 2023;182:107655. doi: 10.1016/j.porgcoat.2023.10 7655BozkurtYBKavasogluYSAtikBKovacıHUzunYÇelikA.Comparison study of corrosion behavior for chitosan coated Ti6Al4V alloy produced by selective laser melting and forging. Progr Org Coat. 2023;182:107655. doi: 10.1016/j.porgcoat.2023.10 7655Open DOISearch in Google Scholar
Syed BAM, Naveed H, Farrukh SA, Muhammad TA, Azhar AK, Muhammad I, et al. Effect of laser surface remelting on microstructure, mechanical properties and tribological properties of metals and alloys: a review. Opt Laser Technol. 2023;165:109588. doi: 10.1016/j.optlastec.2023.109588SyedBAMNaveedHFarrukhSAMuhammadTAAzharAKMuhammadI, Effect of laser surface remelting on microstructure, mechanical properties and tribological properties of metals and alloys: a review. Opt Laser Technol. 2023;165:109588. doi: 10.1016/j.optlastec.2023.109588Open DOISearch in Google Scholar
Dang L, He X, Tang D, Wu B, Li Y. A fatigue life posterior analysis approach for laser-directed energy deposition Ti-6Al-4V alloy based on pore-induced failures by kernel ridge. Eng Fract Mech. 2023;289:109433. doi: 10.1016/j.engfracmech.2023.109433DangLHeXTangDWuBLiY.A fatigue life posterior analysis approach for laser-directed energy deposition Ti-6Al-4V alloy based on pore-induced failures by kernel ridge. Eng Fract Mech. 2023;289:109433. doi: 10.1016/j.engfracmech.2023.109433Open DOISearch in Google Scholar
Yasa E, Deckers J, Kruth J-P. The investigation of the influence of laser re-melting on density, surface quality and microstructure of selective laser melting parts. Rapid Prototyp J. 2011;17:312–27. doi: 10.1108/13552541111156450YasaEDeckersJKruthJ-P.The investigation of the influence of laser re-melting on density, surface quality and microstructure of selective laser melting parts. Rapid Prototyp J. 2011;17:312–27. doi: 10.1108/13552541111156450Open DOISearch in Google Scholar
Guofu L, Yi L, Mengya C, et al. Numerical simulation and experimental study on flatness of inclined multipass cladding coating. Surf Technol. 2023;8:1–19. https://link.cnki.net/urlid/50.1083.TG.20230815.0846.002GuofuLYiLMengyaC, Numerical simulation and experimental study on flatness of inclined multipass cladding coating. Surf Technol. 2023;8:1–19. https://link.cnki.net/urlid/50.1083.TG.20230815.0846.002Search in Google Scholar
Shao Y, Xu P, Tian J. Numerical simulation of the temperature and stress fields in Fe-based alloy coatings produced by wide-band laser cladding. Met Sci Heat Treat. 2021;63:327–33. doi: 10.1007/s11041-021-00690-wShaoYXuPTianJ.Numerical simulation of the temperature and stress fields in Fe-based alloy coatings produced by wide-band laser cladding. Met Sci Heat Treat. 2021;63:327–33. doi: 10.1007/s11041-021-00690-wOpen DOISearch in Google Scholar
Cui Z, Hu X, Dong S, et al. Numerical simulation and experimental study on residual stress in the curved surface forming of 12CrNi2 alloy steel by laser melting deposition. Materials. 2020;13:4316. doi: 10.3390/ma13194316CuiZHuXDongS, Numerical simulation and experimental study on residual stress in the curved surface forming of 12CrNi2 alloy steel by laser melting deposition. Materials. 2020;13:4316. doi: 10.3390/ma13194316Open DOISearch in Google Scholar
Tang H, Li R, Zhu H, et al. Microstructure and mechanical property of Al-Zn-Mg-Cu aluminum alloy substrate repaired by laser directed energy deposition with Al-Mg-Sc alloy powder. Mater Sci Eng Powder Metall. 2022;27:111–20. doi: 10.19976/j.cnki.43-1448/TF.2021101TangHLiRZhuH, Microstructure and mechanical property of Al-Zn-Mg-Cu aluminum alloy substrate repaired by laser directed energy deposition with Al-Mg-Sc alloy powder. Mater Sci Eng Powder Metall. 2022;27:111–20. doi: 10.19976/j.cnki.43-1448/TF.2021101Open DOISearch in Google Scholar
Liu B, Kuai Z, Li Z, et al. Performance consistency of AlSi10Mg alloy manufactured by simulating multi laser beam selective laser melting (SLM): microstructures and mechanical properties. Materials. 2018;11:2354. doi: 10.3390/ma11122354LiuBKuaiZLiZ, Performance consistency of AlSi10Mg alloy manufactured by simulating multi laser beam selective laser melting (SLM): microstructures and mechanical properties. Materials. 2018;11:2354. doi: 10.3390/ma11122354Open DOISearch in Google Scholar
Gao Y, Hong Y, Yin L, et al. Ultrafast growth of high-quality monolayer Wse2 on Au. Adv Mater. 2017;29:1700990. doi: 10.1002/adma.201700990GaoYHongYYinL, Ultrafast growth of high-quality monolayer Wse2 on Au. Adv Mater. 2017;29:1700990. doi: 10.1002/adma.201700990Open DOISearch in Google Scholar
Tan H, Luo Z, Li Y, et al. Effect of strengthening particles on the dry sliding wear behavior of Al2O3–M7C3/Fe metal matrix composite coatings produced by laser cladding. Wear. 2015;324-5:36–44. doi: 10.1016/j.wear.2014.11.023TanHLuoZLiY, Effect of strengthening particles on the dry sliding wear behavior of Al2O3-M7C3/Fe metal matrix composite coatings produced by laser cladding. Wear. 2015;324-5:36–44. doi: 10.1016/j.wear.2014.11.023Open DOISearch in Google Scholar
Li Z, Chai L, Tang Y, et al. 316L stainless steel repaired layers by weld surfacing and laser cladding on a 27SiMn steel: a comparative study of microstructures, corrosion, hardness and wear performances. J Mater Res Technol. 2023;23:2043–2053. doi: 10.1016/j.jmrt.2023.01.162LiZChaiLTangY, 316L stainless steel repaired layers by weld surfacing and laser cladding on a 27SiMn steel: a comparative study of microstructures, corrosion, hardness and wear performances. J Mater Res Technol. 2023;23:2043–2053. doi: 10.1016/j.jmrt.2023.01.162Open DOISearch in Google Scholar
Fang Z, Qi W, Li Z. Effect of laser cladding bonding rate on microstructure, wear resistance and corrosion resistance of 304 stainless steel CoCrW coating. Mater Guide. 2021;35:12123–9. doi: 10.11896/cldb.20040103FangZQiWLiZ.Effect of laser cladding bonding rate on microstructure, wear resistance and corrosion resistance of 304 stainless steel CoCrW coating. Mater Guide. 2021;35:12123–9. doi: 10.11896/cldb.20040103Open DOISearch in Google Scholar
Cui J, Yu J, Cao Y, et al. Microstructure and properties of laser cladding layer of multi-channel lap cobalt base alloy. Heat Treat Met. 2020;45:41–5. doi: 10.13251/j.issn.0254-6051.2020.03.009CuiJYuJCaoY, Microstructure and properties of laser cladding layer of multi-channel lap cobalt base alloy. Heat Treat Met. 2020;45:41–5. doi: 10.13251/j.issn.0254-6051.2020.03.009Open DOISearch in Google Scholar
Tan C, Zhou K, Ma W, et al. Microstructural evolution, nanoprecipitation behavior and mechanical properties of selective laser melted high-performance grade 300 maraging steel. Mater Des. 2017;134:23–34. doi: 10.1016/j.matdes.2017.08.026TanCZhouKMaW, Microstructural evolution, nanoprecipitation behavior and mechanical properties of selective laser melted high-performance grade 300 maraging steel. Mater Des. 2017;134:23–34. doi: 10.1016/j.matdes.2017.08.026Open DOISearch in Google Scholar
Xu G, Luo K, Dai F, et al. Effects of scanning path and overlapping rate on residual stress of 316L stainless steel blade subjected to massive laser shock peening treatment with square spots. Appl Surf Sci. 2019;481:1053–63. doi: 10.1016/j.apsusc.2019.03.093XuGLuoKDaiF, Effects of scanning path and overlapping rate on residual stress of 316L stainless steel blade subjected to massive laser shock peening treatment with square spots. Appl Surf Sci. 2019;481:1053–63. doi: 10.1016/j.apsusc.2019.03.093Open DOISearch in Google Scholar
Syed KA, Ahmad B, Guo H, et al. An experimental study of residual stress and direction-dependence of fatigue crack growth behaviour in as-built and stress-relieved selective-laser-melted Ti6Al4V. Mater Sci Eng A. 2019;755:246–57. doi: 10.1016/j.msea.2019.04.023SyedKAAhmadBGuoH, An experimental study of residual stress and direction-dependence of fatigue crack growth behaviour in as-built and stress-relieved selective-laser-melted Ti6Al4V. Mater Sci Eng A. 2019;755:246–57. doi: 10.1016/j.msea.2019.04.023Open DOISearch in Google Scholar
Leuders S, Thöne M, Riemer A, et al. On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance. Int J Fatigue. 2013;48:300–7. doi: 10.1016/j.ijfatigue.2012.11.011LeudersSThöneMRiemerA, On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance. Int J Fatigue. 2013;48:300–7. doi: 10.1016/j.ijfatigue.2012.11.011Open DOISearch in Google Scholar
Yasa E, Kruth J. Microstructural investigation of selective laser melting 316L stainless steel parts exposed to laser re-melting. Procedia Eng. 2011;19:389–95. doi: 10.1016/j.proeng.2011.11.130YasaEKruthJ.Microstructural investigation of selective laser melting 316L stainless steel parts exposed to laser re-melting. Procedia Eng. 2011;19:389–95. doi: 10.1016/j.proeng.2011.11.130Open DOISearch in Google Scholar
Ming C, Tao L, Bowen S, et al. Study on critical bonding rate and flatness of laser cladding on inclined matrix. Appl Laser. 2023;43:26–32. doi: 10.14128/j.cnki.al.20234303.026MingCTaoLBowenS, Study on critical bonding rate and flatness of laser cladding on inclined matrix. Appl Laser. 2023;43:26–32. doi: 10.14128/j.cnki.al.20234303.026Open DOISearch in Google Scholar
Yasa E, Deckers J, Kruth J. The investigation of the influence of laser re-melting on density, surface quality and microstructure of selective laser melting parts. Rapid Prototyp J. 2011;17:312–27. doi: 10.1108/13552541111156450YasaEDeckersJKruthJ.The investigation of the influence of laser re-melting on density, surface quality and microstructure of selective laser melting parts. Rapid Prototyp J. 2011;17:312–27. doi: 10.1108/13552541111156450Open DOISearch in Google Scholar
Liu B, Li QB, Li Z. Selective laser remelting of an additive layer manufacturing process on AlSi10Mg. Results Phys. 2019;12:982–8. doi: 10.1016/j.rinp.2018.12.018LiuBLiQBLiZ.Selective laser remelting of an additive layer manufacturing process on AlSi10Mg. Results Phys. 2019;12:982–8. doi: 10.1016/j.rinp.2018.12.018Open DOISearch in Google Scholar
Qi P, Li B, Wang T, et al. Microstructure and properties of a novel ternary Ti-6Zr–xFe alloy for biomedical applications. J Alloy Compd. 2020;854:157119. doi: 10.1016/j.jallcom.2020.157119QiPLiBWangT, Microstructure and properties of a novel ternary Ti-6Zr–xFe alloy for biomedical applications. J Alloy Compd. 2020;854:157119. doi: 10.1016/j.jallcom.2020.157119Open DOISearch in Google Scholar
Shubhadeep M, Kumar BS, Supriya B. Fascinating microstructural evolution during consolidation and remarkable hardening behaviour of micro alloyed Al-Cu-Ni alloys. Adv Powder Technol. 2023;34:104183. doi: 10.1016/j.apt.2023.104183ShubhadeepMKumarBSSupriyaB.Fascinating microstructural evolution during consolidation and remarkable hardening behaviour of micro alloyed Al-Cu-Ni alloys. Adv Powder Technol. 2023;34:104183. doi: 10.1016/j.apt.2023.104183Open DOISearch in Google Scholar
Tushar S, Visvalingam B, Thiruvenkatam V, et al. Effect of post weld heat treatment on weld metal microstructure and hardness of HFCA-TIG welded ASTM-B670 high temperature alloy joints. JALMES. 2023;3:100025. doi: 10.1016/j.jalmes.2023.100025TusharSVisvalingamBThiruvenkatamV, Effect of post weld heat treatment on weld metal microstructure and hardness of HFCA-TIG welded ASTM-B670 high temperature alloy joints. JALMES. 2023;3:100025. doi: 10.1016/j.jalmes.2023.100025Open DOISearch in Google Scholar
Wang Q, Liu Z. Microhardness prediction based on a microstructure-sensitive flow stress model during high speed machining Ti-6Al-4V. J Manuf Sci. 2018;140:091003. doi: 10.1115/1.4039889WangQLiuZ.Microhardness prediction based on a microstructure-sensitive flow stress model during high speed machining Ti-6Al-4V. J Manuf Sci. 2018;140:091003. doi: 10.1115/1.4039889Open DOISearch in Google Scholar
Heigel JC, Phan TQ, Fox JC, et al. Experimental investigation of residual stress and its impact on machining in hybrid additive/subtractive manufacturing. Procedia Manuf. 2018;26:929–94. doi: 10.1016/j.promfg.2018.07.120HeigelJCPhanTQFoxJC, Experimental investigation of residual stress and its impact on machining in hybrid additive/subtractive manufacturing. Procedia Manuf. 2018;26:929–94. doi: 10.1016/j.promfg.2018.07.120Open DOISearch in Google Scholar
Wang Z, Zhou J, Ren J, et al. Hybrid prediction model for residual stress profile induced by multi-axis milling Ti-6Al-4 V titanium alloy combined finite element with experiment. Int J Adv Manuf Tech Technol. 2023;126:4495–511. doi: 10.1007/s00170-023-11406-0WangZZhouJRenJ, Hybrid prediction model for residual stress profile induced by multi-axis milling Ti-6Al-4 V titanium alloy combined finite element with experiment. Int J Adv Manuf Tech Technol. 2023;126:4495–511. doi: 10.1007/s00170-023-11406-0Open DOISearch in Google Scholar
Guo Q, Wang Y, Lin J. Effect of additive and subtractive hybrid manufacturing process on the surface quality of 18Ni300 maraging steel. Mater Res Express. 2023;10:056501. doi: 10.1088/2053-1591/accfe8GuoQWangYLinJ.Effect of additive and subtractive hybrid manufacturing process on the surface quality of 18Ni300 maraging steel. Mater Res Express. 2023;10:056501. doi: 10.1088/2053-1591/accfe8Open DOISearch in Google Scholar
Zhang X, Yu T, Wang W, et al. Improved analytical prediction of burr formationin micro end milling. Int J Mech Sci. 2019;151:461–70. doi: 10.1016/j.ijmecsci.2018.12.005ZhangXYuTWangW, Improved analytical prediction of burr formationin micro end milling. Int J Mech Sci. 2019;151:461–70. doi: 10.1016/j.ijmecsci.2018.12.005Open DOISearch in Google Scholar
Zhang Y, Yang G, Li J, et al. Milling experiment of diamond-coated micro-milling cutter. Chin J Mech Eng-EN. 2020;31:1772–7. doi: 10.3969/j.issn.1004-132X.2020.15.002ZhangYYangGLiJ, Milling experiment of diamond-coated micro-milling cutter. Chin J Mech Eng-EN. 2020;31:1772–7. doi: 10.3969/j.issn.1004-132X.2020.15.002Open DOISearch in Google Scholar
Guifam U, Syed H, Mushtao K, et al. Analysis of burr formation in low speed micro milling of titanium alloy (Ti6A14V). Mech Sci. 2018;9:231–43. doi: 10.5194/ms-9-231-2018GuifamUSyedHMushtaoK, Analysis of burr formation in low speed micro milling of titanium alloy (Ti6A14V). Mech Sci. 2018;9:231–43. doi: 10.5194/ms-9-231-2018Open DOISearch in Google Scholar
Bissacco G, Hansen H, Chiffre DL. Size effects on surface generation in micro milling of hardened tool steel. CIRP Ann-Manuf Technol. 2006;55:593–6. doi: 10.1016/S0007-8506(07)60490-9BissaccoGHansenHChiffreDL.Size effects on surface generation in micro milling of hardened tool steel. CIRP Ann-Manuf Technol. 2006;55:593–6. doi: 10.1016/S0007-8506(07)60490-9Open DOISearch in Google Scholar