This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
John R, Lin R, Jayaraman K, Bhattacharyya D. Modified Taylor’s equation including the effects of fiber characteristics on tool wear when machining natural fiber composites. Wear. 2021;468–469: No. 203606, doi: 10.1016/j.wear.2020.203606.JohnRLinRJayaramanKBhattacharyyaD.Modified Taylor’s equation including the effects of fiber characteristics on tool wear when machining natural fiber composites. Wear. 2021;468–469: No. 203606, doi: 10.1016/j.wear.2020.203606.Open DOISearch in Google Scholar
Farid AA, Sharif S, Idris MH. Performance and wear mechanisms of uncoated, TiAlN, and AlTiN-coated carbide tools in high-speed drilling of Al-Si alloy. Int J Adv Manuf Technol. 2021;113:2671–84. doi: 10.1007/s00170-021-06663-w.FaridAASharifSIdrisMH.Performance and wear mechanisms of uncoated, TiAlN, and AlTiN-coated carbide tools in high-speed drilling of Al-Si alloy. Int J Adv Manuf Technol. 2021;113:2671–84. doi: 10.1007/s00170-021-06663-w.Open DOISearch in Google Scholar
Milan JCG, Machado AR, Tomaz IV, da Silva LRR, Barbosa CA, Mia M, Pimenov DY. Effects of calcium-treatment of a plastic injection mold steel on the tool wear and power consumption in slot milling. J Mater Res Technol. 2021;13:1103–14, doi: 10.1016/j.jmrt.2021.05.021.MilanJCGMachadoARTomazIVda SilvaLRRBarbosaCAMiaMPimenovDY.Effects of calcium-treatment of a plastic injection mold steel on the tool wear and power consumption in slot milling. J Mater Res Technol. 2021;13:1103–14, doi: 10.1016/j.jmrt.2021.05.021.Open DOISearch in Google Scholar
Kuo CP, Su SC, Chen SH. Tool life and surface integrity when milling inconel718 with coated cemented carbide tools. J Chin Inst Eng, Trans Chin Inst Eng, Series A. 2021;33(6):915–22. doi: 10.1080/02533839.2010.9671680.KuoCPSuSCChenSH.Tool life and surface integrity when milling inconel718 with coated cemented carbide tools. J Chin Inst Eng, Trans Chin Inst Eng, Series A. 2021;33(6):915–22. doi: 10.1080/02533839.2010.9671680.Open DOISearch in Google Scholar
Santos ALB, Dos Duarte MAV, Abrao AM, Machado AR. An optimization procedure to determine the coefficients of the extended Taylor’s equation in machining. Int J Mach Tools Manuf. 1999;39(1):17–31, doi: 10.1016/S0890-6955(98)00025-X.SantosALBDos DuarteMAVAbraoAMMachadoAR.An optimization procedure to determine the coefficients of the extended Taylor’s equation in machining. Int J Mach Tools Manuf. 1999;39(1):17–31, doi: 10.1016/S0890-6955(98)00025-X.Open DOISearch in Google Scholar
Poulachon G, Moisan A, Jawahir IS. Tool-wear mechanisms in hard turning with polycrystalline cubic boron nitride tools. Wear. 2001;250:576–86. doi: 10.1016/S0043-1648(01)00609-3.PoulachonGMoisanAJawahirIS.Tool-wear mechanisms in hard turning with polycrystalline cubic boron nitride tools. Wear. 2001;250:576–86. doi: 10.1016/S0043-1648(01)00609-3.Open DOISearch in Google Scholar
El-Tamimi AM, El-Hossainny TM. Investigating the tool life, cutting force components, and surface roughness of AISI 302 stainless steel material under oblique machining. Mater Manuf Proc. 2008;23:427–38. doi: 10.1080/10426910801974846.El-TamimiAMEl-HossainnyTM.Investigating the tool life, cutting force components, and surface roughness of AISI 302 stainless steel material under oblique machining. Mater Manuf Proc. 2008;23:427–38. doi: 10.1080/10426910801974846.Open DOISearch in Google Scholar
Kurniawan D, Yusof NM, Sharif S. Hard machining of stainless steel using wiper coated carbide: tool life and surface integrity. Mater Manuf Proc. 2010;25:370–377. doi: 10.1080/10426910903179930.KurniawanDYusofNMSharifS.Hard machining of stainless steel using wiper coated carbide: tool life and surface integrity. Mater Manuf Proc. 2010;25:370–377. doi: 10.1080/10426910903179930.Open DOISearch in Google Scholar
Xiong J, Guo Z, Yang M, Wan W, Dong G. Tool life and wear of WC–TiC–Co ultrafine cemented carbide during dry cutting of AISI H13 steel. Ceram Int. 2013;39:337– 46, doi: 10.1016/j.ceramint.2012.06.031.XiongJGuoZYangMWanWDongG.Tool life and wear of WC–TiC–Co ultrafine cemented carbide during dry cutting of AISI H13 steel. Ceram Int. 2013;39:337–46, doi: 10.1016/j.ceramint.2012.06.031.Open DOISearch in Google Scholar
Batista M, Davim P, Salguero J, Gomez-Parra A, Marcos M. Taylor’s model based analysis of turning inserts tool-life in the dry turning of UNS R56400 alloy. ASME IMECE. 2014; 1. No. 111737, doi: 10.1115/IMECE2014-38710.BatistaMDavimPSalgueroJGomez-ParraAMarcosM.Taylor’s model based analysis of turning inserts tool-life in the dry turning of UNS R56400 alloy. ASME IMECE. 2014;1. No. 111737, doi: 10.1115/IMECE2014-38710.Open DOISearch in Google Scholar
Correa JG, Schroeter RB, Machado AR. Tool life and wear mechanism analysis of carbide tools used in the machining of martensitic and supermartensitic stainless steels. Tribol Int. 2017;105:102–17. doi: 10.1016/j.triboint.2016.09.035.CorreaJGSchroeterRBMachadoAR.Tool life and wear mechanism analysis of carbide tools used in the machining of martensitic and supermartensitic stainless steels. Tribol Int. 2017;105:102–17. doi: 10.1016/j.triboint.2016.09.035.Open DOISearch in Google Scholar
Chen SH, Luo ZR. Study of using cutting chip color to the tool wear prediction. Int J Adv Manuf Technol. 2020;109:823–39. doi: 10.1007/s00170-020-05354-2.ChenSHLuoZR.Study of using cutting chip color to the tool wear prediction. Int J Adv Manuf Technol. 2020;109:823–39. doi: 10.1007/s00170-020-05354-2.Open DOISearch in Google Scholar
Timata M, Saikaew C. Experimental and simulation study on tool life models in drilling of forging brass using uncoated-WC and AlCrN coated-WC tools. Coatings. 2019;9(853). doi: 10.3390/coatings9120853.TimataMSaikaewC.Experimental and simulation study on tool life models in drilling of forging brass using uncoated-WC and AlCrN coated-WC tools. Coatings. 2019;9(853). doi:10.3390/coatings9120853.Open DOISearch in Google Scholar
Kovac P, Gostimiroviv M, Rodic D, Savkovic B. Using the temperature method for the prediction of tool life in sustainable production. Meas: J Int Meas Confed. 2019;133:320–7. doi: 10.1016/j.measurement.2018.09.074.KovacPGostimirovivMRodicDSavkovicB.Using the temperature method for the prediction of tool life in sustainable production. Meas: J Int Meas Confed. 2019;133:320–7. doi: 10.1016/j.measurement.2018.09.074.Open DOISearch in Google Scholar
Kundrák J, Pálmai Z. Application of general tool-life function under changing cutting conditions. Acta Polytech. Hung. 11(2):61–76. doi: 10.10700/aph.11.02.2014.02.4.KundrákJPálmaiZ.Application of general tool-life function under changing cutting conditions. Acta Polytech. Hung. 11(2):61–76. doi: 10.10700/aph.11.02.2014.02.4.Open DOISearch in Google Scholar
Srisattayakul P, Saikaew C, Wisisoraat A. Effects of hard chrome and MoN-coated stainless steel on wear behavior and tool life model under two-body abrasion wear testing. Metalurgija. 2017;56(3,4):371–4.SrisattayakulPSaikaewCWisisoraatA.Effects of hard chrome and MoN-coated stainless steel on wear behavior and tool life model under two-body abrasion wear testing. Metalurgija. 2017;56(3,4):371–4.Search in Google Scholar
Vasanth XA, Paul PS, Lawrance G, Varadarajan AS. Vibration control techniques during turning process: a review. Aust J Mech Eng. 2017;19:221–41. doi: 0.1080/144848846.2019.1585224.VasanthXAPaulPSLawranceGVaradarajanAS.Vibration control techniques during turning process: a review. Aust J Mech Eng. 2017;19:221–41. doi: 0.1080/144848846.2019.1585224.Search in Google Scholar
Aouici H, Elbah M, Yallese MA, Fnides B, Meddour I, Benlahmidi S. Performance comparison of wiper and conventional ceramic inserts in hard turning of AISI 4140 steel: analysis of machining forces and flank wear. Int J Adv Manufa Technol. 2016;87(5–8):2221–44. doi: 10.1007/s00170-016-8567-7.AouiciHElbahMYalleseMAFnidesBMeddourIBenlahmidiS.Performance comparison of wiper and conventional ceramic inserts in hard turning of AISI 4140 steel: analysis of machining forces and flank wear. Int J Adv Manufa Technol. 2016;87(5–8):2221–44. doi: 10.1007/s00170-016-8567-7.Open DOISearch in Google Scholar
Saikaew C, Paengchit P, Wisitsoraat A. Machining performances of TiN+AlCrN coated WC and Al2O3+TiC inserts for turning of AISI 4140 steel under dry condition. J Manuf Proc. 2020;50:412–20. doi: 10.1016/j.jmapro.2019.12.057.SaikaewCPaengchitPWisitsoraatA.Machining performances of TiN+AlCrN coated WC and Al2O3+TiC inserts for turning of AISI 4140 steel under dry condition. J Manuf Proc. 2020;50:412–20. doi: 10.1016/j.jmapro.2019.12.057.Open DOISearch in Google Scholar
Taylor FW. On the art of cutting metals. Trans ASME. 1907;28:31–279.TaylorFW.On the art of cutting metals. Trans ASME. 1907;28:31–279.Search in Google Scholar
Shaw MC, Cookson JO. Metal cutting principles. Oxford, UK: Oxford University Press; 2005.ShawMCCooksonJO.Metal cutting principles. Oxford, UK: Oxford University Press;2005.Search in Google Scholar
Evans JR, Olson DL. Introduction to simulation and risk analysis. Upper Saddle River, NJ, USA: Prentice Hall; 2002.EvansJROlsonDL.Introduction to simulation and risk analysis. Upper Saddle River, NJ, USA: Prentice Hall;2002.Search in Google Scholar
Law AM, Kelton WD. Simulation modeling and analysis. Second Ed. New York: McGraw-Hill, Inc.; 1991.LawAMKeltonWD.Simulation modeling and analysis. Second Ed.New York: McGraw-Hill, Inc.; 1991.Search in Google Scholar
Marci ME, Moultif R, Lahlou S, Rochd S, Dezairi A. Monte Carlo simulations of MgO and Mg(OH)2 thin films sputtering yields by noble gas ion bombardment in plasma display panel PDP. Nucl Inst Methods Phys Res B. 2018;430:72–8. doi: 10.1016/j.nimb.2018.05.046.MarciMEMoultifRLahlouSRochdSDezairiA.Monte Carlo simulations of MgO and Mg(OH)2 thin films sputtering yields by noble gas ion bombardment in plasma display panel PDP. Nucl Inst Methods Phys Res B. 2018;430:72–8. doi: 10.1016/j.nimb.2018.05.046.Open DOISearch in Google Scholar
Klinkov SV, Kosarev VF. Monte Carlo simulation of the cold spray process of mixtures of metal and ceramic powders. J Therm Spray Technol. 2021;30:1081– 92. doi: 10.1007/s11666-021-01176-0.KlinkovSVKosarevVF.Monte Carlo simulation of the cold spray process of mixtures of metal and ceramic powders. J Therm Spray Technol. 2021;30:1081–92. doi: 10.1007/s11666-021-01176-0.Open DOISearch in Google Scholar
Kahraman MF, Öztürk S. Uncertainty analysis of cutting parameters during grinding based on RSM optimization and Monte Carlo simulation. Mater Test. 2019;61(12):1215–9. doi: 10.3139/120.111443.KahramanMFÖztürkS.Uncertainty analysis of cutting parameters during grinding based on RSM optimization and Monte Carlo simulation. Mater Test. 2019;61(12):1215–9. doi: 10.3139/120.111443.Open DOISearch in Google Scholar
Kahraman MF, Öztürk S. Experimental study of newly structural design grinding wheel considering response surface optimization and Monte Carlo simulation. Meas: J Int Meas Confed. 2019;147: No. 106825, doi: 10.1016/j.measurement.2019.07.053.KahramanMFÖztürkS.Experimental study of newly structural design grinding wheel considering response surface optimization and Monte Carlo simulation. Meas: J Int Meas Confed. 2019;147: No. 106825, doi: 10.1016/j.measurement.2019.07.053.Open DOISearch in Google Scholar
Öztürk S, Kahraman MF. Modeling and optimization of machining parameters during grinding of flat glass using response surface methodology and probabilistic uncertainty analysis based on Monte Carlo simulation. Meas: J Int Meas Confed. 2019;145:274–91. doi: 10.1016/j.measurement.2019.05.098.ÖztürkSKahramanMF.Modeling and optimization of machining parameters during grinding of flat glass using response surface methodology and probabilistic uncertainty analysis based on Monte Carlo simulation. Meas: J Int Meas Confed. 2019;145:274–91. doi: 10.1016/j.measurement.2019.05.098.Open DOISearch in Google Scholar
Kostić D, Milošević D, Stefanović S, Jovanov G, Cvejić R. Improving the operational; reliability model of the “Nikola Tesla-Block A” Therma; power plant system by applying an integrated maintenance model. Trans FAMENA. 2019;38(1):79–94. doi: 10.21278/TOF.43106.KostićDMiloševićDStefanovićSJovanovGCvejićR.Improving the operational; reliability model of the “Nikola Tesla-Block A” Therma; power plant system by applying an integrated maintenance model. Trans FAMENA. 2019;38(1):79–94. doi: 10.21278/TOF.43106.Open DOISearch in Google Scholar
Kahraman MF, Bilge H, Öztürk S. Uncertainty analysis of milling parameters using Monte Carlo simulation, the Taguchi optimization method and data-driven modeling. Mater Test. 2019;61(5):477–83. doi: 10.3139/120.111344.KahramanMFBilgeHÖztürkS.Uncertainty analysis of milling parameters using Monte Carlo simulation, the Taguchi optimization method and data-driven modeling. Mater Test. 2019;61(5):477–83. doi: 10.3139/120.111344.Open DOISearch in Google Scholar
Sarnobat SS, Raval HK. Experimental investigation and analysis of the influence of tool edge geometry and work piece hardness on surface residual stresses, surface roughness and work-hardening in hard turning of AISI D2 steel. Meas: J Int Meas Confed. 2019;131:235–60. doi: 10.1016/j.measurement.2018.08.048.SarnobatSSRavalHK.Experimental investigation and analysis of the influence of tool edge geometry and work piece hardness on surface residual stresses, surface roughness and work-hardening in hard turning of AISI D2 steel. Meas: J Int Meas Confed. 2019;131:235–60. doi: 10.1016/j.measurement.2018.08.048.Open DOISearch in Google Scholar
Thomas AJ, Chad J, John E, Davis A, Francis M. Defining a bearing replacement strategy using Monte Carlo methods. Int J Qual Reliab Manag. 2010;28(2):155–68, doi: 10.1108/02656711111101737.ThomasAJChadJJohnEDavisAFrancisM.Defining a bearing replacement strategy using Monte Carlo methods. Int J Qual Reliab Manag. 2010;28(2):155–68, doi: 10.1108/02656711111101737.Open DOISearch in Google Scholar
Masuda M, Sato T, Kori T, Chujo Y. Cutting performance and wear mechanism of alumina-based tools when machining austempered ductile iron. Wear. 1994;174:147–53, doi: 10.1016/0043-1648(94)90096-5.MasudaMSatoTKoriTChujoY.Cutting performance and wear mechanism of alumina-based tools when machining austempered ductile iron. Wear. 1994;174:147–53, doi: 10.1016/0043-1648(94)90096-5.Open DOISearch in Google Scholar
Fernandez-Valdivielso A, López de Lacalle LN, Fernandez-Lucio P, Gonzalez H. Turning of austempered ductile iron with ceramic tools. Proc Inst Mechan Engi, Part B: J Eng Manuf. 2021;235:484–93, doi: 10.1177/0954405420957154.Fernandez-ValdivielsoALópez de LacalleLNFernandez-LucioPGonzalezH.Turning of austempered ductile iron with ceramic tools. Proc Inst Mechan Engi, Part B: J Eng Manuf. 2021;235:484–93, doi: 10.1177/0954405420957154.Open DOISearch in Google Scholar