<abstract xmlns="http://www.w3.org/1999/xhtml">

Yttrium borate phosphor co-doping Ce3+, Tb3+ ions (YBO3: Ce3+, Tb3+) is fabricated using solid state reaction, and then its luminescence is investigated through the computational energy transfer process. Under excited near-UV light, this YBO3: Ce3+, Tb3+ phosphor exhibits strong absorption with broad and sharp emission bands due to the 4f – 5d and 5d – 4f transitions of Ce3+ ions and the 4f – 4f transition of Tb3+ ions, respectively. The phosphor's emission chromaticity could be tunable by adjusting the concentration of doping ions. With 15% Tb3+ and 3% Ce3+ in the composition, the phosphor can gain maximum 76.7% external quantum efficacy. The phosphor is proposed for utilization in the phosphor package of white light-emitting diodes (WLEDs) to enhance their lighting performances. The findings point out that by modifying YBO3: Ce3+, Tb3+ concentration (5% – 10%), improvements in luminous intensities, color consistency, and color rendering indices can be observed. The higher concentration (10%) of YBO3: Ce3+, Tb3+ is more advantageous to the luminous flux and chromatic uniformity in cases of 4000 K and 5000 K WLEDs, while lower (5%) concentration greatly benefits those properties in the case of 3000 K WLED. Regardless of CCTs, the WLEDs show a reduction in chromatic reproduction efficiency with the increasing concentration of YBO3: Ce3+, Tb3+. Hence, this green phosphor could be a good material for high-luminescence WLED, yet the modification of phosphor concentration is advisable if the simultaneous good chromaticity is desired.
</abstract>

Yttrium borate phosphor co-doping Ce3+, Tb3+ ions (YBO3: Ce3+, Tb3+) is fabricated using solid state reaction, and then its luminescence is investigated through the computational energy transfer process. Under excited near-UV light, this YBO3: Ce3+, Tb3+ phosphor exhibits strong absorption with broad and sharp emission bands due to the 4f – 5d and 5d – 4f transitions of Ce3+ ions and the 4f – 4f transition of Tb3+ ions, respectively. The phosphor's emission chromaticity could be tunable by adjusting the concentration of doping ions. With 15% Tb3+ and 3% Ce3+ in the composition, the phosphor can gain maximum 76.7% external quantum efficacy. The phosphor is proposed for utilization in the phosphor package of white light-emitting diodes (WLEDs) to enhance their lighting performances. The findings point out that by modifying YBO3: Ce3+, Tb3+ concentration (5% – 10%), improvements in luminous intensities, color consistency, and color rendering indices can be observed. The higher concentration (10%) of YBO3: Ce3+, Tb3+ is more advantageous to the luminous flux and chromatic uniformity in cases of 4000 K and 5000 K WLEDs, while lower (5%) concentration greatly benefits those properties in the case of 3000 K WLED. Regardless of CCTs, the WLEDs show a reduction in chromatic reproduction efficiency with the increasing concentration of YBO3: Ce3+, Tb3+. Hence, this green phosphor could be a good material for high-luminescence WLED, yet the modification of phosphor concentration is advisable if the simultaneous good chromaticity is desired.

Phosphor conversion for WLEDs: YBO3: Ce3+, Tb3+ and its effects on the luminous intensity and chromatic properties of dual-layer WLED model

Vinh Long University of Technology Education

Faculty of Electrical and Electronics Engineering

National Kaohsiung University of Science and Technology

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Phosphor conversion for WLEDs: YBO: Ce, Tb and its effects on the luminous intensity and chromatic properties of dual-layer WLED model

Yttrium borate phosphor co-doping Ce3+, Tb3+ ions (YBO3: Ce3+, Tb3+) is fabricated using solid state reaction, and then its luminescence is investigated...

Phosphor conversion for WLEDs: YBO₃: Ce³⁺, Tb³⁺ and its effects on the luminous intensity and chromatic properties of dual-layer WLED model

Online veröffentlicht: 14. Apr. 2023

Seitenbereich: 105 - 113

Eingereicht: 13. Mai 2022

Akzeptiert: 28. Nov. 2022

DOI: https://doi.org/10.2478/msp-2022-0050

Schlüsselwörter
WLEDs, YBO:Ce,Tb, luminous intensity, chromatic properties, remote phosphor structure, dual-layer phosphor

© 2022 Le Thi Thuy My et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Phosphor conversion for WLEDs: YBO3: Ce3+, Tb3+ and its effects on the luminous intensity and chromatic properties of dual-layer WLED model

Online veröffentlicht: 14. Apr. 2023

Seitenbereich: 105 - 113

Eingereicht: 13. Mai 2022

Akzeptiert: 28. Nov. 2022

DOI: https://doi.org/10.2478/msp-2022-0050

SchlüsselwörterWLEDs, YBO:Ce,Tb, luminous intensity, chromatic properties, remote phosphor structure, dual-layer phosphor

© 2022 Le Thi Thuy My et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Phosphor conversion for WLEDs: YBO₃: Ce³⁺, Tb³⁺ and its effects on the luminous intensity and chromatic properties of dual-layer WLED model

Schlüsselwörter
WLEDs, YBO:Ce,Tb, luminous intensity, chromatic properties, remote phosphor structure, dual-layer phosphor