<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Businesses are constantly making productivity improvements to survive in the highly competitive marketplace. Bottlenecks have been identified as one of the main factors limiting the system performance of manufacturing firms. Thus, identifying bottlenecks in the production process is extremely important to increase productivity. Considering its importance, this case study was designed to identify causes for not meeting the tire target and determine the implications of bottlenecks in the tire manufacturing process. For this purpose, simulation analysis was carried out for the solid resilience tire-building process. Through the investigation, the cushion layer-building process was identified as the bottleneck. To validate the identified limitation, Line balancing and Pareto analysis were conducted. Analysis results confirmed the presence of a bottleneck in the cushion layer-building process. Further, to identify the root causes for not reaching the maximum tire target, Cause-and-Effect analysis and 5WHY analysis were adopted. The study revealed that inadequately maintained outdated machines and frequent power failures are the leading causes of not meeting the maximum production. By answering these issues, the target production can be increased, and the results showed the opportunity to increase the efficiency of the manufacturing process by more than 95%.</p>
</abstract>

Businesses are constantly making productivity improvements to survive in the highly competitive marketplace. Bottlenecks have been identified as one of the main factors limiting the system performance of manufacturing firms. Thus, identifying bottlenecks in the production process is extremely important to increase productivity. Considering its importance, this case study was designed to identify causes for not meeting the tire target and determine the implications of bottlenecks in the tire manufacturing process. For this purpose, simulation analysis was carried out for the solid resilience tire-building process. Through the investigation, the cushion layer-building process was identified as the bottleneck. To validate the identified limitation, Line balancing and Pareto analysis were conducted. Analysis results confirmed the presence of a bottleneck in the cushion layer-building process. Further, to identify the root causes for not reaching the maximum tire target, Cause-and-Effect analysis and 5WHY analysis were adopted. The study revealed that inadequately maintained outdated machines and frequent power failures are the leading causes of not meeting the maximum production. By answering these issues, the target production can be increased, and the results showed the opportunity to increase the efficiency of the manufacturing process by more than 95%.

Bottleneck Identification through Simulation Modelling: A Case of Solid Tire Manufacturing Sector

Management Dynamics in the Knowledge Economy

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Businesses are constantly making productivity improvements to survive in the highly competitive marketplace. Bottlenecks have been identified as one of the...

Bottleneck Identification through Simulation Modelling: A Case of Solid Tire Manufacturing Sector

Online veröffentlicht: 01. Jan. 2024

Seitenbereich: 324 - 337

Eingereicht: 16. Mai 2023

Akzeptiert: 03. Sept. 2023

DOI: https://doi.org/10.2478/mdke-2023-0020

Schlüsselwörter
simulation modelling, bottlenecks, productivity, line balancing, solid tire manufacturing

© 2023 Edirisinghe Arachchige Dona Dilesha Divyanjali Edirisinghe et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Bottleneck Identification through Simulation Modelling: A Case of Solid Tire Manufacturing Sector

Online veröffentlicht: 01. Jan. 2024

Seitenbereich: 324 - 337

Eingereicht: 16. Mai 2023

Akzeptiert: 03. Sept. 2023

DOI: https://doi.org/10.2478/mdke-2023-0020

Schlüsselwörtersimulation modelling, bottlenecks, productivity, line balancing, solid tire manufacturing

© 2023 Edirisinghe Arachchige Dona Dilesha Divyanjali Edirisinghe et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Schlüsselwörter
simulation modelling, bottlenecks, productivity, line balancing, solid tire manufacturing