<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The study explores the detection of a harmful, wide-band interference signal, whose origin is a traditional desk LED (light-emitting diode) lamp. The interference signal was noticed on the sensitive solar spectrometer observing system, which was operating at a frequency range between 100 and 300 MHz. The interference signal was so strong and wide-band that it destroyed totally the solar observations. The study introduces two practical EMI (Electromagnetic Interference) reducing methods: ferrite cores and shielding (shielding effectiveness, S.E.). Their theoretical background is presented, and, in addition, these methods are tested in practice. The measurements and tests showed that even simple ferrite core was a very effective method to reduce interference effects. It is important that a suitable setup will be found: a single ferrite core cannot solve a whole problem. This interference problem is very demonstrative and it can be used in educational purposes at an undergraduate level at Metropolia University of Applied Sciences, Finland. This study reveals the fact that standard lamps, which are on the market, do not necessarily follow good EMC (Electromagnetic Compatibility) practices.</p>
</abstract>

The study explores the detection of a harmful, wide-band interference signal, whose origin is a traditional desk LED (light-emitting diode) lamp. The interference signal was noticed on the sensitive solar spectrometer observing system, which was operating at a frequency range between 100 and 300 MHz. The interference signal was so strong and wide-band that it destroyed totally the solar observations. The study introduces two practical EMI (Electromagnetic Interference) reducing methods: ferrite cores and shielding (shielding effectiveness, S.E.). Their theoretical background is presented, and, in addition, these methods are tested in practice. The measurements and tests showed that even simple ferrite core was a very effective method to reduce interference effects. It is important that a suitable setup will be found: a single ferrite core cannot solve a whole problem. This interference problem is very demonstrative and it can be used in educational purposes at an undergraduate level at Metropolia University of Applied Sciences, Finland. This study reveals the fact that standard lamps, which are on the market, do not necessarily follow good EMC (Electromagnetic Compatibility) practices.

A Practical Solution to Reduce Interference from Led Lights

Metropolia University of Applied Sciences

Latvian Journal of Physics and Technical Sciences

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"A Practical Solution to Reduce Interference from Led Lights"}

The study explores the detection of a harmful, wide-band interference signal, whose origin is a traditional desk LED (light-emitting diode) lamp. The...

A Practical Solution to Reduce Interference from Led Lights

Online veröffentlicht: 10. Feb. 2024

Seitenbereich: 35 - 42

DOI: https://doi.org/10.2478/lpts-2024-0004

Schlüsselwörter
EMI reducing methods, LED lights, wide-band interference signals

© 2024 J. Kallunki, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

A Practical Solution to Reduce Interference from Led Lights

Online veröffentlicht: 10. Feb. 2024

Seitenbereich: 35 - 42

DOI: https://doi.org/10.2478/lpts-2024-0004

SchlüsselwörterEMI reducing methods, LED lights, wide-band interference signals

© 2024 J. Kallunki, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
EMI reducing methods, LED lights, wide-band interference signals