<abstract xmlns="http://www.w3.org/1999/xhtml"> Differential scanning calorimetry was carried out to determine the heat capacity (Cp) of the high temperature resistant ceramic materials to be used as protective coatings for stainless steel tubes of parabolic trough solar collectors in concentrated solar power (CSP) systems. The Ср(Т) measurements and calculations were performed at continuous scanning in the temperature range 20-800 °С. In the work, calibration curves have been derived for conversion of measuring units from mcV into mW. To achieve a better repeatability of measurements, methods for stabilization of the thermal contact between the sample-containing vessel and the probe have been developed. The Ср(Т) dependence was obtained for different ceramic materials.</abstract>

Differential scanning calorimetry was carried out to determine the heat capacity (Cp) of the high temperature resistant ceramic materials to be used as protective coatings for stainless steel tubes of parabolic trough solar collectors in concentrated solar power (CSP) systems. The Ср(Т) measurements and calculations were performed at continuous scanning in the temperature range 20-800 °С. In the work, calibration curves have been derived for conversion of measuring units from mcV into mW. To achieve a better repeatability of measurements, methods for stabilization of the thermal contact between the sample-containing vessel and the probe have been developed. The Ср(Т) dependence was obtained for different ceramic materials.

A Calorimetric Method for Determination of Heat Capacity of Ceramics for Concentrated Solar Thermal Systems / Skenējošās Kalorimetrijas Metode Siltumietilpības Noteikšanai Saules Kolektoru Keramikā

Institute of Physical Energetics, 21 Aizkraukles Str., LV-1006, Riga, LATVIA,

Institute of Silicate Materials of the Riga Technical University, 1 Kaļķu Str., LV-1658, Riga, LATVIA

Latvian Journal of Physics and Technical Sciences

Differential scanning calorimetry was carried out to determine the heat capacity (Cp) of the high temperature resistant ceramic materials to be used as...

A Calorimetric Method for Determination of Heat Capacity of Ceramics for Concentrated Solar Thermal Systems / Skenējošās Kalorimetrijas Metode Siltumietilpības Noteikšanai Saules Kolektoru Keramikā

Online veröffentlicht: 17. Nov. 2013

Seitenbereich: 68 - 73

DOI: https://doi.org/10.2478/lpts-2013-0034

This content is open access.