<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Most organic corrosion inhibitors have polar groups through which the molecule can be adsorbed strongly or specifically on the metal surface. In this investigation, terephthalo- hydrazide and isophthalohydrazide were synthesized as corrosion inhibitors, and their corrosion-inhibiting properties on mild steel were evaluated in a corrosive environment by weight loss measurements. The results of corrosion experiments revealed that terephthalohydrazide and isophthalohydrazide as inhibitors controlled or reduced corrosion through adsorption mechanism and showed inhibitive efficiencies of 96.4 % and 97.2 %, respectively, at the optimum concentration of 0.5 mM. The surface morphology of the metal was evaluated by scanning electron microscopy. The terephthalohydrazide or isophthalohydrazide molecules were adsorbed on the mild steel surface, and the process of adsorption follows chemical adsorption. Quantum chemical calculations of the tested corrosion inhibitors were consistent with the experimental observations.</p>
</abstract>

Most organic corrosion inhibitors have polar groups through which the molecule can be adsorbed strongly or specifically on the metal surface. In this investigation, terephthalo- hydrazide and isophthalohydrazide were synthesized as corrosion inhibitors, and their corrosion-inhibiting properties on mild steel were evaluated in a corrosive environment by weight loss measurements. The results of corrosion experiments revealed that terephthalohydrazide and isophthalohydrazide as inhibitors controlled or reduced corrosion through adsorption mechanism and showed inhibitive efficiencies of 96.4 % and 97.2 %, respectively, at the optimum concentration of 0.5 mM. The surface morphology of the metal was evaluated by scanning electron microscopy. The terephthalohydrazide or isophthalohydrazide molecules were adsorbed on the mild steel surface, and the process of adsorption follows chemical adsorption. Quantum chemical calculations of the tested corrosion inhibitors were consistent with the experimental observations.

Terephthalohydrazide and isophthalo- hydrazide as new corrosion inhibitors for mild steel in hydrochloric acid: Experimental and theoretical approaches

Technical College Al-Musaib, Al-Furat Al-Awsat Technical University

Department of Chemical & Process Engineering

KOM – Corrosion and Material Protection Journal

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Most organic corrosion inhibitors have polar groups through which the molecule can be adsorbed strongly or specifically on the metal surface. In this...

Terephthalohydrazide and isophthalo- hydrazide as new corrosion inhibitors for mild steel in hydrochloric acid: Experimental and theoretical approaches

Online veröffentlicht: 12. Juni 2021

Seitenbereich: 12 - 22

DOI: https://doi.org/10.2478/kom-2021-0002

© 2021 Shaimaa B. Al-Baghdadi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.