<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>In dredging applications, deep sea mining and land reclamation projects typically large amounts of sediments are transported through pipes in the form of hyper concentrated (40% sediment or more) sediment-water mixtures or slurries. In this paper it is investigated how well a generic Euler-Euler CFD-model is capable to model velocity, concentration profiles and the pressure gradient of sediment above deposition limit velocity in a pipeline. This Euler-Euler solver treats both phases as a continuum with its own momentum and continuity equations. The full kinetic theory for granular flows is accounted for (no algebraic form is used) and is combined with a buoyant <italic>k-ε</italic> turbulence model for the fluid phase. The influence of the mesh size has been checked and grid convergence is achieved. All numerical schemes used are of second-order accuracy in space. The pressure gradient was calibrated by adjusting the specularity coefficient in one calibration case and kept constant afterwards. Simulations were carried out in a wide range of slurry flow parameters, in situ volume concentration (9–42%), pipe diameter (0.05–0.90 m), particle diameter (90–440 μm) and flow velocity of (3–7 m/s). The model shows satisfactory agreement to experimental data from existing literature.</p>
</abstract>

In dredging applications, deep sea mining and land reclamation projects typically large amounts of sediments are transported through pipes in the form of hyper concentrated (40% sediment or more) sediment-water mixtures or slurries. In this paper it is investigated how well a generic Euler-Euler CFD-model is capable to model velocity, concentration profiles and the pressure gradient of sediment above deposition limit velocity in a pipeline. This Euler-Euler solver treats both phases as a continuum with its own momentum and continuity equations. The full kinetic theory for granular flows is accounted for (no algebraic form is used) and is combined with a buoyant k-ε turbulence model for the fluid phase. The influence of the mesh size has been checked and grid convergence is achieved. All numerical schemes used are of second-order accuracy in space. The pressure gradient was calibrated by adjusting the specularity coefficient in one calibration case and kept constant afterwards. Simulations were carried out in a wide range of slurry flow parameters, in situ volume concentration (9–42%), pipe diameter (0.05–0.90 m), particle diameter (90–440 μm) and flow velocity of (3–7 m/s). The model shows satisfactory agreement to experimental data from existing literature.

Two-phase modelling for sediment water mixtures above the limit deposit velocity in horizontal pipelines

Journal of Hydrology and Hydromechanics

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

In dredging applications, deep sea mining and land reclamation projects typically large amounts of sediments are transported through pipes in the form of hyper...

Two-phase modelling for sediment water mixtures above the limit deposit velocity in horizontal pipelines

Online veröffentlicht: 10. Aug. 2021

Seitenbereich: 263 - 274

Eingereicht: 14. Jan. 2021

Akzeptiert: 27. Apr. 2021

DOI: https://doi.org/10.2478/johh-2021-0011

Schlüsselwörter
Slurry flow, Two-phase modelling, CFD, Kinetic theory

© 2021 Thijs Schouten et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Two-phase modelling for sediment water mixtures above the limit deposit velocity in horizontal pipelines

Online veröffentlicht: 10. Aug. 2021

Seitenbereich: 263 - 274

Eingereicht: 14. Jan. 2021

Akzeptiert: 27. Apr. 2021

DOI: https://doi.org/10.2478/johh-2021-0011

SchlüsselwörterSlurry flow, Two-phase modelling, CFD, Kinetic theory

© 2021 Thijs Schouten et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
Slurry flow, Two-phase modelling, CFD, Kinetic theory