Influence of heat flow direction on solder ball interfacial layer

[1] V. Wirth, K. Rendl and F. Steiner, “Effect of Multiple Reflow Cycles on Intermetallic Compound Creation”, 38th International Spring Seminar on Electronics Technology (ISSE) Hungary (Eger), 2015, pp. 226–230.10.1109/ISSE.2015.7247995Search in Google Scholar

[2] D. Bušek, K. Dušek and O. Renza, “Study of Temperature Profile Influence on Intermetallic Growth”, 40th International Spring Seminar on Electronics Technology, Bulgaria (Sofia), 2017, pp. 1–4.10.1109/ISSE.2017.8000922Search in Google Scholar

[3] M. S. Park and R. Arróyave, “Concurrent Nucleation, Formation and Growth of Two Intermetallic Compounds (Cu6Sn5 and Cu3Sn) during the Early Stages of Lead-Free Soldering”, Acta Materialia vol. 60, 2012, pp. 923–934.10.1016/j.actamat.2011.10.053Search in Google Scholar

[4] M. L. Huang and F. Yang, “Solder Size Effect on Early Stage Interfacial Intermetallic Compound Evolution Wetting Reaction of Sn3.0Ag0.5Cu/ENEPIG Joints”, Journal of Materials Science and Technology vol. 31, 2015, pp. 252–256.10.1016/j.jmst.2015.01.003Search in Google Scholar

[5] C. E. Ho, R. Y. Tsai, Y. L. Lin and C. R. Kao, “Effect of Cu concentration on the reactions between Sn-Ag-Cu Solders and Ni”, Journal of Electronic Materials vol. 31, no. 6, 2002, pp. 584–590.10.1007/s11664-002-0129-0Search in Google Scholar

[6] R. Pandher and A. Pachamuthu, “Effect of Multiple Reflow Cycles on Solder Joint Formation and Reliability”, SMTA International Conference 2010, pp. 444–449.Search in Google Scholar

[7] J. F. J. M. Caers, X. J. Zhao, E. H. Wong, S. K. W. Seah, C. S. Selvanayagam, W. Driel, N. Owens, M. Leoni, L. C. Tan, P. L. Eu, Yi-Shao Lai and Chang-Lin Yeh, “A Study of Crack Propagation in Pb-Free Solder Joints”, Electronics Packaging Manufacturing vol. 33, no.2, Apr 2010, pp. 84–90.10.1109/TEPM.2009.2039710Search in Google Scholar

[8] D. Wang and R. L. Panton, “Effect of Reversing Heat Flux Direction During Reflow on Void Formation High-Lead Solder Bumps”, Journal of Electronic Packaging vol. 127, no.4, 2005, pp. 440–445.10.1115/1.2070047Search in Google Scholar

[9] N. Zhao, Y. Zhong, M. L. Huang, H. T. Ma and W. Dong, “Growth Kinetics of Cu6Sn5 Intermetallic Compound at Liquid-Solid Interfaces Cu/Sn/Cu Interconnects under Temperature Gradient”, Scientific Reports vol. 5, 2015.10.1038/srep13491455091426311323Search in Google Scholar

[10] B. Tao, Y. Wu, H. Ding and Y. L. Xiong, “A Quantitative Method of Reliability Estimation for Surface Mount Solder Joints based on Heating Factor Qη” Microelectronics Reliability vol. 46, 2006, pp. 864–872.10.1016/j.microrel.2005.04.013Search in Google Scholar

[11] T. An and F. Qin, “Relationship between the Intermetallic Compounds Growth and the Microcracking Behavior of Lead-Free Solder Joints”, Journal of Electronic Packaging vol. 138, no. 1, 2015.10.1115/1.4032349Search in Google Scholar

[12] D. Q. Yu and L. Wang, “The Growth and Roughness Evolution of Intermetallic Compounds of Sn-Ag-Cu/Cu Interface during Soldering Reaction”, Journal of Alloys and Compounds vol. 458, no.1-2, 2008, pp. 542–547.10.1016/j.jallcom.2007.04.047Search in Google Scholar

[13] J. G. Gao, Y. P. Wu and H. Ding, “Optimization of a Reflow Soldering Process based on the Heating Factor”, Soldering & Surface Mount Technology vol. 19, no. 1, 2007, pp. 28–33.10.1108/09540910710748131Search in Google Scholar

[14] P. Veselý, E. Horynová, J. Starý, D. Bušek, K. Dušek, V. Zahradník, M. Plaček, P. Mach, M. Kučírek, V. Ježek and M. Dosedla, “Solder Joint Quality Evaluation based on Heating Factor”, Circuit World vol. 44, no.1, 2018, pp. 37–44.10.1108/CW-10-2017-0059Search in Google Scholar

[15] O. Krammer and M. Nagy, “Reliability Comparison of Infrared and Vapour Phase Soldering”, 18th International Symposium for Design and Technology Electronic Packaging (SIITME) 2012, pp. 49–52.10.1109/SIITME.2012.6384344Search in Google Scholar

[16] Y. C. Sohn, Jin-Yu, S. K. Kang, D. Y. Shih and T. Y. Lee, “Spalling of Intermetallic Compounds during the Reaction between Solders and Electroless Ni-P Metallization”, Journal of Materials Research vol. 19, 2004, pp. 2428–2436.10.1557/JMR.2004.0297Search in Google Scholar

[17] Y. Okano, N. Audet, S. Dost and S. Kunikata, “Effect of Liquid Shape on Flow Velocity Induced by Marangoni Convection a Floating Half-Zone System”, Journal of Crystal Growth vol. 204, no. 1-2, 1999, pp. 243–246.10.1016/S0022-0248(99)00138-4Search in Google Scholar

[18] T. Hurtony, P. Gordon and B. Balogh, “Formation and Distribution of Sn-Cu IMC Lead-Free Soldering Process Induced by Laser Heating”, Micro and Nanosystems vol. 2, no. 3, pp. 178–184.10.2174/1876402911002030178Search in Google Scholar

[19] A. Otáhal, J. Somer and I. Szendiuch, “Influence of Heating Direction on BGA Solder Balls Structure”, 21st European Microelectronics and Packaging Conference (EMPC) & Exhibition, 2017 pp. 1–4.10.23919/EMPC.2017.8346878Search in Google Scholar

[20] Yan Gu, Ping Shen, Nan-Nan Yang and Kang-Zhan Cao, “Effects of Direct Current on the Wetting Behavior and Interfacial Morphology between Molten Sn and Cu Substrate”, Journal of Alloys and Compounds vol. 586, 2014, pp. 80–86.10.1016/j.jallcom.2013.10.021Search in Google Scholar

[21] A. S. Zuruzi, S. K. Lahiri, P. Burman and K. S. Siow, “Correlation between Intermetallic Thickness and Roughness During Solder Reflow”, Journal of Electronic Materials vol. 30, 2001, pp. 997–1000.10.1007/BF02657724Search in Google Scholar